ALL-TEST IV Pro Motor Circuit Analyzer with 115V Charger/Adapter - 50004

50004 ALL-TEST IV Pro Motor Circuit Analyzer with 115V Charger / Adapter

The handheld ALL-TEST IV PRO (ATIV) is an excellent analytical instrument for detecting and trending potential winding faults in AC and DC motors, transformers (distribution and transmission), generators, alternators, and other devices with windings. The ATIV is also used for off-line rotor testing for issues such as eccentricity, broken/fractured rotor bars, and casting voids.

The ATIV makes the following 5 measurements plus an insulation to ground test:
Resistance (R), phase angle (Fi), current/frequency response (I/F), the impedance (Z) and inductance (L).

The ATIV will store up to 500 motor tests and test results can be sent to the provided computer software via the PC interface. The provided TREND™ software offers analysis, trending and reporting for single and three phase AC induction motors.

Optional EMCAT PRO™ software is available for analysis of DC motors and transformers.

The ATIV will test fractional horsepower motors to large synchronous machines and test measurement rules are well established and are easy to understand.

Features:

Easy To Use

An automatic test mode is used for most tests. On screen prompts walk you through the test. In just a few minutes, anyone can learn to use it!

On The Spot Diagnosis For Troubleshooting

ALL-TEST IV PRO™ results are immediately displayed for field evaluation. Our quick reference guide helps you make the call on the spot. Answer the mechanical/electrical question immediately, rule the motor "in" or "out".

Data Collector With Companion Software For PdM

The ALL-TEST IV PRO™ has enough memory to store 500 tests (more than a day’s work). Upload test results to your computer, our software provides expert diagnosis, trending, and a wide variety of printed or on screen reports.

Convenient–Test From The Motor Control Center

Most tests on installed motors are done from the MCC, you can test through over 1000 feet of cable. Even hard to reach motors (overhead cranes, submersible pumps, etc) can be tested quickly and easily. In many cases you do not even need to disconnect from the drive output terminals! No need to test at the motor terminals unless a fault is indicated.

Safe For Operators And Equipment

All test are performed on de-energised circuits. Measurements technology is low voltage and current, and completely non-destructive. Regular and repeated testing will not affect the life of the windings.

Quickly Evaluates The Entire Motor Circuit

A single 2 minute test evaluates the windings, cabling, and connections. Additional tests let you evaluate the rotor, and capacitors, and cabling to pinpoint the fault.

Sensitive

Detects motor faults at their earliest stages. Even detects conditions such as deteriorating or contaminated insulation.

Light Weight And Hand Held

The instruments weight under 2 lbs, is battery powered and handheld. No need to take a cart when you test a motor. And it can test virtually any size motor.

Tests All Kinds Of Motors And Coil Based Devices

• All types of motors: induction, synchronous, DC, brushless DC, servo, wound rotor, even single phase motors.
• All Components: induction windings and rotors, DC shunt and field windings, armatures, Field and rotor coils in synchronous motors.
• Transformers: Single and 3-phase, pole and pad mounted

Includes:

• Case
• Charger
• Test Leads
• PC Interface Cable
• TREND™ software