1-866-4 JJSTECH(1-866-455-7832)

Hanna Digital Refractometer for Measurement of Sugar in Wine °Baumé - HI96812

Item #:
HI96812
Brand:
Hanna Instruments
Hanna Digital Refractometer for Measurement of Sugar in Wine °Baumé - HI96812
$212.00
Qty

Discontinued

Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
Hanna Digital Refractometer for Measurement of Sugar in Wine °Baumé - HI96812

Hanna Digital Refractometer for Measurement of Sugar in Wine Baumé - HI96812

$212.00

Discontinued


HI96812 Digital Refractometer for Measurement of Sugar in Wine °Baumé by Hanna Instruments

The HI 96812 Digital Wine Refractometer is rugged, lightweight and waterproof for measurements in the lab or field.

This optical instrument employs the measurement of the refractive index to determine parameters pertinent to the wine industry.

The actual measurement of the refractive index is simple and quick and provides the vintner a standard accepted method for sugar content analysis. Samples are measured after a simple user calibration with deionized or distilled water. Within seconds, the instrument measures the refractive index of the grape must. These digital refractometers eliminate the uncertainty associated with mechanical refractometers and are ideal for fast, reliable measurements in the field.

HI 96812 has units of °Baumé. The °Baumé scale is based on density and was originally designed to measure the mass of sodium chloride in water. °Baumé is used in wine making to measure the sugar in must. The HI 96812 converts the %Brix reading to °Baumé based on the table found in the Official Methods of Analysis of AOAC International, 18th Edition. 1 °Baumé is approximately equal to 1.8 %Brix, and 1 °Baumé is roughly equivalent to 1 % alcohol when the wine is fully fermented.

  • The dual-level LCD displays measurement and temperature readings simultaneously
  • Automatic Temperature Compensation for accurate measurements
  • Easy measurement; place a few drops of the sample in the well and press the READ key
  • BEPS (Battery Error Prevention System) alerts the user in the event that low battery power could adversely affect readings.
  • IP65 water protection; built to perform under harsh laboratory and field conditions.
  • Quick, accurate results, readings are displayed in approximately 1.5 seconds.
  • Single point calibration with distilled or deionized water
  • Small sample size, can be as small as 2 metric drops.
  • Automatic shut-off after three minutes of non-use
  • Stainless steel sample well, easy to clean and corrosion resistant
  • ABS thermoplastic casing

Order Information:

HI 96812 is supplied with battery and instruction manual.

Sugar Content Range 0 to 27 °Baumé
Temperature Range 0 to 80°C (32 to 176°F)
Sugar Content Resolution 0.1 °Baumé
Temperature Resolution ±0.1°C (0.1°F)
Sugar Content Accuracy (@20°C) ±0.1 °Baumé
Temperature Accuracy (@20°C) ±0.3°C (0.5°F)
Temperature Compensation automatic between 10 and 40°C (50 to 104°F)
Measurement Time approximately 1.5 seconds
Minimum Sample Volume 100 µL (to cover prism totally)
Light Source yellow LED
Sample Cell stainless steel ring and flint glass prism
Auto-off after three minutes of non-use
Enclosure Rating IP65
Battery Type / Battery Life 9V / approximately 5000 readings
Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
Weight 420 g (14.8 oz.)

Datasheets & User Manuals

Questions & Answers


There are no questions or answers for this item.