1-866-4 JJSTECH(1-866-455-7832)

Hanna Digital Refractometer for Sodium Chloride Measurement - HI96821

Item #:
HI96821
Brand:
Hanna Instruments
Hanna Digital Refractometer for Sodium Chloride Measurement - HI96821
$212.00
Qty

Discontinued

Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
Hanna Digital Refractometer for Sodium Chloride Measurement - HI96821

Hanna Digital Refractometer for Sodium Chloride Measurement - HI96821

$212.00

Discontinued


HI96821 Digital Refractometer for Sodium Chloride Measurement by Hanna Instruments

HANNA offers the HI 96821 digital sodium chloride refractometer to meet the requirements of the food industry. This optical instrument employs the measurement of the refractive index to determine sodium chloride concentration in aqueous solutions used in food preparation. It is not intended for sea water salinity measurements.

The measurement of refractive index is simple and quick and provides the user an accepted method for NaCl analysis. Samples are measured after a simple user calibration with deionized or distilled water. Within seconds the instrument measures the refractive index of the solution. The digital refractometer eliminates the uncertainty associated with mechanical refractometers and is portable for measurements where you need them.

The instrument utilizes internationally recognized references for unit conversion and temperature compensation. It can display the measurement of NaCl concentration 4 different ways: g/100 g, g/100 mL, specific gravity, and °Baumé.

Temperature (in °C or °F) is displayed simultaneously with the measurement (on 3 of the ranges) on the large dual level display along with icons for Low Power and other helpful message codes.

  • Ideal for the analysis of: Salad Dressings, Cheeses, Condiments, Pickles, Canned Foods, Jarred Foods, Milk, Juices, Energy Drinks, Soups, Brines and Whey
  • The dual-level LCD displays measurement and temperature readings simultaneously
  • Automatic Temperature Compensation for accurate measurements
  • Easy measurement; place a few drops of the sample in the well and press the READ key
  • BEPS (Battery Error Prevention System) alerts the user in the event that low battery power could adversely affect readings.
  • IP65 water protection; built to perform under harsh laboratory and field conditions.
  • Quick, accurate results, readings are displayed in approximately 1.5 seconds.
  • Single point calibration with distilled or deionized water
  • Small sample size, can be as small as 2 metric drops.
  • Automatic shut-off after three minutes of non-use
  • Stainless steel sample well, easy to clean and corrosion resistant
  • ABS thermoplastic casing

Order Information:

HI 96821 supplied with battery and instruction manual.

g/100 g Range 0 to 28
g/100 mL Range 0 to 34
Specific Gravity Range 1.000 to 1.216
°Baumé Range 0 to 26
Temperature Range 0 to 80°C (32 to 176°F)
g/100 g Resolution 0.1
g/100 mL Resolution 0.1
Specific Gravity Resolution 0.001
°Baumé Resolution 0.1
Temperature Resolution 0.1°C (0.1°F)
g/100 g Accuracy (@20°C) ±0.2
g/100 mL Accuracy (@20°C) ±0.2
Specific Gravity Accuracy (@20°C) ±0.002
°Baumé Accuracy (@20°C) ±0.2
Temperature Accuracy (@20°C) ±0.3°C (0.5°F)
Temperature Compensation automatic between 10 and 40°C (50 to 104°F)
Measurement Time approximately 1.5 seconds
Minimum Sample Volume 100 µL (to cover prism totally)
Light Source yellow LED
Sample Cell stainless steel ring and flint glass prism
Auto-off after three minutes of non-use
Enclosure Rating IP 65
Battery Type / Battery Life 9V / approximately 5000 readings
Dimensions 192 x 104 x 69 mm (7.6 x 4.1 x 2.7”)
Weight 420 g (14.8 oz.)

Datasheets & User Manuals

Questions & Answers


There are no questions or answers for this item.