1-866-4 JJSTECH(1-866-455-7832)

01 Series Single Gas Monitor

Item #:
1053
01 Series Single Gas Monitor
$360.00
Qty
Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
01 Series Single Gas Monitor

01 Series Single Gas Monitor

$360.00
Choose Options

Are your workers tired of lugging around large, bulky, heavy gas detection equipment?
Are you tired of dealing with repeated equipment failures and units that are always in the shop?


    • Available in CO, H2S, O2, LEL configurations
    • CO, H2S, O2 models run for 3000 hours on alkaline batteries
    • LEL model runs for 16 hours
    • 2 year warranty
    • Small and Lightweight
    • High Quality and Low Cost
    • Peak, STEL, and TWA alarms

    Now both of these problems are a thing of the past. The 01 series are single gas monitors that are exceptionally easy to operate, with unmatched reliability. Simply install the batteries and the units are ready to operate. No complicated set up, and no hassles.
    Workers will be protected with three levels of alarms. Audible, Visual, and Vibration will make sure users are alerted to a dangerous condition no matter what the environment is. For example if a worker is in a particularly noisy environment they may not hear the audible alarm but they will feel the vibration and see the bright LED visual alarms. The alarms are user adjustable and can be set to any level to meet your particular situation, but come defaulted to OSHA recommended set point levels.
Scroll down for Specs












Model Name
OX-01 CO-01HS-01 HS-01S GP-01
Gas Detected
Oxygen (O2)
Carbon Monoxide (CO)

Hydrogen Sulfide (H2S)
Combustible gas
Detection
Principle
Galvanic cell
electrochemical
Catalytic combustion
Detection
Range
0 – 40%vol.
(0.1%vol.)
0 – 500 ppm

(1 ppm)
0 – 100 ppm
(0.5 ppm)
0 – 100% LEL

(1% LEL Increments)
Alarm Set Points Low 19.5%vol.
High 23.5%vol.

Over 40.0%vol.
1st 25 ppm
2nd 50 ppm
TWA 25 ppm
STEL 200 ppm
Over 500 ppm
1st 10 ppm
2nd 30 ppm
TWA 10 ppm
STEL 15 ppm
Over 100 ppm

1st alarm 10% LEL
2nd alarm 50% LEL
Over alarm 100% LEL
Types of Alarms
    Gas alarms: 1st and 2nd (user adjustable), OVER alarm, STEL and TWA
    Trouble alarms: Sensor connection, low battery circuit failure, and calibration range error

Alarm Indication
    Gas alarm: Flashing LED's, intermittent buzzer, flashing gas value, and vibration

    Trouble alarm: Flashing LED's, intermittent buzzer, and display of error message
    STEL & TWA alarms: Flashing LED's, intermittent buzzer, flashing gas value, and vibration
Preset Alarms

(User Adjustable)
Diffusion
Response
Time
T90 in 30 seconds

(alarms within 5
seconds when
exposed to 12% O2)
T90 in 30 seconds
Accuracy+/- 0.5%vol. +/- 5 ppm
(up to 150 ppm)
+/- 1.5 ppm (up to 30 ppm)
+/- 5% of full scale

Power Alkaline dry cell (2-AAA size)
Alkaline dry cell

Ni-Cad battery pack
Continuous
Operation
Alkaline dry cell: more than 3,000 hours
(at 25°C, no backlight)
1,500 hours at -40°C
Alkaline: 16 hours

Ni-Cad: 8 hours
Safety CSA classified, "C/US", as intrinsically safe. Class I, Div. 1. Group A, B, C & D
Dimension &
Weight
1.4”W x 4.1”H x 0.8”D, (35 x 105 x 20mm); 3.5 ounces (100g)
Display 7-segment + symbol on digital LCD, auto backlighting during alarm
Special Functions Manual backlight for LCD (automatically lit during alarm)
Peak hold, STEL & TWA
Operating Temp.
& Humidity
-4°F ~ 122°F (-20°C ~ 50°C);

Humidity below 90% RH (non-condensing)
-40°F ~ 122°F
(-40°C ~ 50°C);
Humidity below 90%
RH (non-condensing)
-4°F ~ 122°F
(-20°C ~ 50°C);
Humidity below 90%
RH (non-condensing)
Standard
Accessories
Rubber protective boots
Belt clip or alligator clip
Wrist strap

Alkaline batteries
Optional
Accessories
Calibration cap (adapter)
Charger unit
Calibration kit
Ni-Cad battery pack
Warranty
Two years material and workmanship

Datasheets & User Manuals

Questions & Answers


There are no questions or answers for this item.