1-866-4 JJSTECH(1-866-455-7832)

Hanna TDS Tester with 1 mg/L EC resolution & 0.1 °C resolution with remote probe with batteries - PRIMO3

Item #:
PRIMO3
Brand:
Hanna Instruments
Hanna TDS Tester with 1 mg/L EC resolution & 0.1 °C resolution with remote probe with batteries - PRIMO3
$85.00
Qty

Discontinued

Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
Hanna TDS Tester with 1 mg/L EC resolution & 0.1 °C resolution with remote probe with batteries - PRIMO3

Hanna TDS Tester with 1 mg/L EC resolution & 0.1 C resolution with remote probe with batteries - PRIMO3

$85.00

Discontinued


PRIMO3 TDS Tester with 1 mg/L EC resolution & 0.1 °C resolution with remote probe with batteries by Hanna Instruments

The Primo series of testers provide a fast and dependable way to measure the total dissolved solids or conductivity in your water samples. It is ideally suited for the rigorous demands of water quality professionals. Many professionals use the cabled version of the Primo when demonstrating the before and after results of conditioning and filtration systems.

Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature.

Operating and routine maintenance has never been easier. Primo uses a single button at the top of the meter for each parameter. Press it once and the meter is powered and ready for use. Press and hold the button for a few seconds and Primo automatically enters calibration mode. Simply open a sachet of calibration solution, dip the probe in, and within seconds the meter recognizes the calibration solution and calibrates itself!

  • Cable probe connection
  • Automatic calibration
  • Automatic Temperature Compensation

Order Information:

Primo 3 with 1 m (3.3’) cable probe connection is supplied with batteries and instructions.

Range 0 to 1999 ppm (mg/L); 0.0 to 60.0°C
Resolution 1 ppm (mg/L); 0.1°C
Accuracy ±2% F.S.; ±0.5°C
Calibration Solution HI 70032P
Calibration automatic, at 1382 ppm
Temperature Compensation Automatic, 0 to 60°C (32 to 140°F), ß=2%/°C
Battery Type / Life 2 x 1.5V / approx. 200 hours; auto-off after 5 minutes of non-use
Environment 0 to 50°C (32 to 122°F); RH max 95%
Dimensions 66 x 50 x 25 mm (2.6 x 2.0 x 1.0") - meter only
Weight 115 g (4.1 oz.)

Datasheets & User Manuals

Questions & Answers


There are no questions or answers for this item.