Navigation

7.Navigation

All navigation is done by pressing the single button on the Honeywell BW Solo. Here are the basic “rules” of navigation on the instrument:

Power On
Power Off

Enter menus (from main screen)
Move to next choice
Select current choice
Hold until acknowledged

Hold through countdown

3-second hold
5-second hold from the main screen

Double-click
Single-click (quickly press once)

Short Hold (press and hold for 1 second)
Cursor or current choice stops blinking
Cursor moves to next choice
Long Hold (press and hold for 3 seconds)
Selected process is initiated

7.1. Glance Navigation

At the main screen, press the button once, and the backlight comes on. In addition, a critically low battery level and any compliance issues are shown. For example, if the instrument fails a bump test, it will show a Bump FAIL. If there is a failure, an associated icon and fault message alert you.

In addition, if there is a failure or low battery, the Alert LED will illuminate.

Note: When the last screen is reached, if you click the button once, it returns to the main screen. If you do not click the button for 6 seconds from any of the screens, it returns to the main screen automatically.

7.2. Main Navigation

1. Start at the main screen and click the button twice in rapid succession (similar to a double mouse-click) to start.
2. The first option you see is “>Information”. Step through the other top-level options one click at a time.

Note: A cursor (>) before a heading indicates that there are submenus or editable parameters below the current screen.