Import Datalogs to FleetManager

Note

Refer to the following minimum requirements before importing datalogs to FleetManager.

Minimum PC Requirements

• 500 MHz Pentium (or equivalent)
• 100 MB free hard disk space
• Microsoft® Windows 98 or later
• USB port

Using MicroDock II to Import to FleetManager

Note

If the detector is used with the MicroDock II Automatic Test and Calibration Station to import datalogs to FleetManager, refer to the MicroDock II User Manual for complete instructions.

Using a Card Reader to Import to FleetManager

To import a datalog file from the detector to FleetManager, complete the following:

1. Deactivate the detector.
2. Release the latch and remove the battery pack.
3. Remove the MMC/SD from the detector. Refer to Figure 6 and Table 14.
4. Connect the card reader to the USB port on the computer.
5. Insert the MMC into the card reader (ensure that the pins face down).

6. From the computer desktop, click FleetManager. A popup displays. Select one of the following:

• Create New Database
• Use Existing Database

7. Another window opens. Select the required database.
8. From the FleetManager window, click Import from the left menu bar.
9. A popup displays: No MicroDock devices found. Click OK.

A browser window opens Key in Data Log File Path. If required, expand the window.

10. Press to browse to My Computer.
11. From My Computer, select Removable Disk drive.
12. From the Removable Disk drive, double-click LOGFILE0.

For additional information and procedures, refer to the Fleet Manager Deluxe CD and FleetManager on-line help.