Jenco Handheld Cond/TDS/Sal/Temp Meter Kit - 3010M+106A

Item #:

3010M-106A

Brand:

Jenco

Our tech experts are ready to help!

Share this product:

3010M+106A Handheld Cond/TDS/Sal/Temp Meter Kit by Jenco

Simultaneous displays of conductivity, salinity or TDS with temperature measurements.
50 data set reviewable memory.
Convenient one point calibration. Calibration data is stored in memory and ready for use on power up.
Selectable cell constants for true wide range readings.
Adjustable TDS coefficient, reference temperature and temperature coefficient.
Uses one conductivity cell for conductivity, salinity and TDS measurements.
Accepts 2-wire conductivity cells with K=0.1, 1.0 and 10.0 cell constants for improved flexibility and accuracy.
Automatic shutoff function (30 minutes of non-use).
Battery life over 1000 hours.
IP65 waterproof.
Low battery indicator.
RoHS and CE compliant.

Range	Conductivity: 0.000 to 9.999uS/cm; 100.0 to 400.0uS/cm; 0.00 to 99.99uS/cm; 100.00 to 999.9uS/cm; 1000 to 9999uS/cm; 10.00 to 40.00mS/cm; 0.0 to 999.9uS/cm; 1000 to 9999uS/cm; 10.00 to 99.99uS/cm; 100.0 to 400.0mS/cm; 10.0 to 99.99uS/cm Salinity: 0.0 to 70.0 ppt Temp.: -10.0 to 90.0 °C
Resolution	Conductivity: 0.001 uS/cm ,0.01uS/cm, 0.1uS/ccm,0.01mS/cm Salinity: 0.1 ppt Temp.: 0.1 °C
Accuracy	Conductivity: ±0.5 % FS Salinity: ±0.5% FS Temp.: ± 0.2 °C or ±0.4%FS
Reference temperature	From15.0 to 25 °C,default is 25.0 °C
Temperature Coefficient	From 0.00 to 4.00%,default is 1.91%
TDS Constant	From 0.30 to 1.00%,default is 0.65
Electrode Type / Cell Constant	Two wire K=0.1, 1.0 , 10 conductivity cells ,default is 1,0
ATC	Thermistor,10k ohm at 25°C
Power	9Volt battery
Operating Ambient Conditions	From 0 to 50°C, at 90% RH
Weight:/Dimensions(W x D x H)	260gm,(batteries included)/70mm x 186mm x37mm