- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Gas Monitor Categories
- Single-Gas Monitors
- Multi-Gas Monitors
- Zero Maintenance Monitors
- Fixed System Gas Monitors
- Confined Space Kits
- Wireless Fixed Point Gas Detectors
- Hydrogen Sulfide (H2S) Monitors
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Jenco pH/ORP Bench Controller/Transmitter - 6301N
Item #:
6301N
Brand:
Jenco
Share this product:
6301N pH/ORP Bench Controller/Transmitter by Jenco
- Simultaneous ph/ORP/temperature input & control
- Single loop selectable for ph or ORP
- Relays with standard electrical sockets
- Relay hysteresis center or edge selectable
- 4-20 ma output has offset & span control
- Linear ma output for ph & ORP (abs. Or rel.)
- Buffers 1.68, 4.00, 4.01, 7.00, 9.18, 10.01, & 12.46
- Rs-232c output
- Graphic LCD display
- Tactile keypad with audio feedback
- Automatic temperature compensation (ATC)
- Frozen function for electrode calibration
- Power down memory back-up
- Password protected
- CE approved & ISO 9001 certified
| Range | pH: - 2.00 to + 16.00 pH ORP Absolute: - 2500 to + 2500 mV ORP Relative: - 6499 to + 6499 mV Temp.: -10.0 to + 120.0 °C |
| Resolution | pH: 0.01 pH ORP Absolute: 1 mV ORP Relative: 1 mV Temp.: 0.1 °C |
| Accuracy | pH: ± 0.01 pH ± 1 LSD ORP Absolute: ± 0.1% of rdg ± 1 LSD ORP Relative: ± 0.1% of rdg ± 1 LSD Temp.: ± 0.1°C ± 1 LSD |
| pH | |
| Calibration Auto End Point Sensing | Yes |
| Temperature Compensation Range | –10 ~ 120 °C |
| pH Buffer Temperature Range | 0 ~ 60 °C |
| STAND Recognition | ± 100mV |
| SLOPE Recognition | ± 30% |
| Input Impedance | > 1013 Ω |
| Standard Buffer Recognition | 4.00, 4.01, 6.86, 7.00, 9.18, 10.01 |
| Special Order Buffers | (1.68, 4.01, 6.86, 7.00, 10.01, 12.46) |
| 4-20 mA CURRENT OUTPUT | |
| Current Output Type | Isolated 4 to 20 mA |
| Current Output Mode | pH LINEAR, ORP LINEAR |
| Range | Selectable Zero & Span |
| Accuracy | ± 0.02 mA |
| Isolated Voltage | 500 VDC |
| Maximum Load | 500 Ω |
| ORP | |
| OFFSET Range | ± 3999mV |
| Input Impedance | > 10 13 Ω |
| TEMPERATURE | |
| ATC Sensor | Thermistor, 10k Ω at 25°C |
| OUTPUT RELAYS | |
| Control Type | ON / OFF |
| Programmable Hysteresis Mode | Center or Edge |
| Relay Output, (Resistive Load Only) | 5 Amps @ 115 VAC or 2.5 Amps @ 230VAC |
| GENERAL | |
| Ambient Temp. Range | 0.0 ° C to 50.0 ° C |
| Power | 115 / 230 VAC, 50 / 60 Hz |
| Dimensions | 25cm x 24cm x 10 cm |
| Weight | 1450 grams |
