1-866-4 JJSTECH(1-866-455-7832)

Jenco Benchtop Conductivity Meter Kit - 6377KA

Item #:
Jenco Benchtop Conductivity Meter Kit - 6377KA
Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
Jenco Benchtop Conductivity Meter Kit - 6377KA

Jenco Benchtop Conductivity Meter Kit - 6377KA


6377KA Benchtop Conductivity Meter Kit by Jenco

Kit Includes:

  • 6377 - Benchtop pH/Conductivity/Temperature Meter
  • 109L - Glass/Platinum, W/ 8-Pin Connector, K=1.0 Cell Constant
  • 600P - pH Electrode, 3-ft Cable, BNC Connector, Max Temp. 60 Deg. C
  • 6230D115 - AC Adapter, 9 VDC, Center Negative
  • 007A - Electrode Holder, Spring Balanced, Alumimum Swing Arm

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter is the Multi-parameter meter from a line that is renowned for its reading quality, now with a refined user experience and improved usability.

  • Renowned accuracy and repeatability
  • Upgraded user experience and usability
  • Improved electrode serviceability and low cost of ownership

Well-designed, Inside and Out

The Basis Series pH/EC Multi-parameter meter forms the foundation of Jenco's benchtop meter offerings and comes from a long line of distinguished benchtop meters, where low cost of ownership, reading quality and build quality take precedent.

Renowned Accuracy and Repeatability

The reason Jenco is consistently contracted to build products for well-respected brands and the reason we can consistently win the trust of end-users is due to our reputation for being focused on reading quality. Do the right things in the right way, no cutting corners.

  • Repeatable readings with 0.01 pH and 0.1 mV resolution
  • Repeatable, accurate results achieved with up to 5 points NIST or US buffer calibration for pH, 1 point ORP and 1 point Conductivity offset calibration.
  • Non-volatile memory holds up to 750 data points.
  • Each and every unit is hand calibrated and QCed by at least 2 teams

Upgraded User Experience and Usability

Streamlined and modern design is paired with a large, high contrast backlit LCD, buttons with tactile and audio feedback, and a detached electrode holder arm.

  • Streamlined, modern and smaller design creates clutter-free workspace
  • Large, high contrast LCD
  • Well-situated keys with tactile feedback
  • AC adaptor or battery powered
  • Splash-resistant case made with durable, reinforced plastic for added protection

Improved Electrode Serviceability and Low Cost of Ownership

The Basis Series pH/mV/Conductivity/Salinity/TDS/temperature benchtop meter uses a standard BNC connector for pH and ORP so it works with a vast majority of electrodes available on the market. The decision to make the electrode arm a detached, optional accessory further allows the Basis Series to be setup in the way that works best for you.

  • BNC connector for pH or ORP electrodes
  • 8-Pin DIN for temperature and conductivity probe
pH Range -2.00 to 16.00 pH
pH Resolution 0.01 pH
pH Accuracy ±0.01 pH
mV (RmV) Range (Absolute) - 1999.9 to 1999.9 mV
mV (RmV) Resolution 0.1 mV
mV (RmV) Accuracy ±0.05% F.S.
Conductivity/TDS Range K=0.1 0.00 to 200.0 uS/cm / 0.00 to 200.0 mg/L
Conductivity/TDS Resolution K=0.1 0.01 uS/cm, 0.1 uS/cm / 0.01 mg/L, 0.1 mg/L
Conductivity/TDS Accuracy K=0.1 ±0.5% F.S.
Conductivity/TDS Range K=0.475 0.0 uS/cm to 200.0 mS/cm / 0.0 mg/L to 200.0 g/L
Conductivity/TDS Resolution K=0.475 0.1 μS/cm, 1 μS/cm, 0.01 mS/cm, 0.1 mS/cm / 0.1 mg/L, 1 mg/L, 0.01 g/L, 0.1 g/L
Conductivity/TDS Accuracy K=0.475 ±0.5% F.S.
Salinity Range 0.0 to 80.0 ppt
Salinity Resolution 0.1 ppt
Salinity Accuracy ±0.5% F.S.
Temperature Range 0.0 to 100.0 °C
Temperature Resolution 0.1 °C
Temperature Accuracy ±0.2 °C
pH/EC Temperature Compensation Auto/manual 0.0 to 100.0 °C
pH Buffer Recognition USA, NIST
pH Buffer Temperature Range 0 to 60 °C
pH Electrode Offset Recognition ±1.0 pH
pH Electrode Slope Recognition ±30%
pH calibration Up to 5 point
mV calibration 1 point offset ± 150 mV
Conductivity calibration 1 point
Input Impedance >1012 ohms
Reference Temperature 15.0 to 25.0 °C, default at 25.0 °C
Temperature Coefficient 0.00 to 4.00%, default at 1.91%
TDS Factor 0.30 to 1.00, default at 0.65
Basic Cell Constant K=0.1, k=0.475, user selectable
Calibration Backup Yes
Data Memory 750 sets
Audio Feedback All touch keys
End Point Sensing & Hold pH & ORP
Auto Ranging Conductivity
ATC Probe Thermistor,10 kohm
Ambient Temperature Range 0 to 50 °C
Relative Humidity Up to 90%
Power Supply 100 to 240 V AC adapter or AAA x 6 Batteries
Weight 430 grams
Dimensions (w x d x h) 150 x 210 x 45 mm

Datasheets & User Manuals

Questions & Answers

There are no questions or answers for this item.