Jenco ORP Transmitter/Controller with 1 ORP & 1 pH Inputs, 1/4 DIN - 6503

Item #:

6503

Brand:

Jenco

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us

Share this product:

Description

6503 ORP Transmitter/Controller with 1 ORP & 1 pH Inputs, 1/4 DIN by Jenco

1/4 DIN panel mount ORP controller/transmitter, microprocessor based, password protected with membrane keypad. LCD displays ORP or pH and temp. Meter has dual SPDT Hi/Lo relays, with programmable hysteresis and a reversible, isolated and programmable 4-20 mA output. Connectors are dual BNC for pH/ORP and spade lug type. ATC is 10K thermistor or simulation resistor. Power 115 / 230V AC

Controls ORP & measures pH
Offset calibration for ORP
Set point security code protection
Dual on/off relays
0.5 high LCD display
Auto/manual temp. compensation
Power down memory backup
Audio feed back touch keys
1/4 DIN housing

Specifications

Range	pH: -2.00 to 16.00 pH ORP: -1999 to 1999 mV Temp.: 0 to 115 °C
Resolution	pH: 0.01 pH ORP: 1 mV Temp.: 0.1 °C
Accuracy	pH: ± 0.01pH ± 1 digit ORP: ±0.1% ± 1 digit Temp.: ± 0.2 °C ± 1 digit
Current Output
Isolated current output	Reversible & programable 4 to 20 mA
Isolation voltage	500V DC maximum
Transmitter load	550 ohms maximum
General
Input impedance	>10exp(13) ohms
Default ORP buffer	86mV
Temperature compensation	Auto/manual (thermistor 10kw at 25 °C
pH buffer recognition	4.00. 6.86. & 9.18
pH slope recognition	±30%
Relay output (resistive load)	5amp at 115V AC or 2.5 amp at 230V AC
Relay set point hysteresis	User programable
Power failure back up	Yes
Power source	115V AC or 230V AC, 50/60 hz
Weight	750 grams