1-866-4 JJSTECH(1-866-455-7832)

RKI Instruments Eagle Portable Monitor for Nitric Acid (HNO3), 0 - 20 PPM - 72-5128RK

Item #:
72-5128RK
Brand:
RKI Instruments
$2,678.00
Qty
Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
RKI Instruments Eagle Portable Monitor for Nitric Acid (HNO3), 0 - 20 PPM - 72-5128RK

RKI Instruments Eagle Portable Monitor for Nitric Acid (HNO3), 0 - 20 PPM - 72-5128RK

$2,678.00

72-5128RK Eagle Portable Monitor for Nitric Acid (HNO3), 0 - 20 PPM by RKI Instruments

The Eagle Portable Monitor can simultaneously detect up to 6 different gases. With over 400 gas monitoring configurations, the unit can detect a wide range of toxic gases. RKI Industries offers long life protection for workplace safety and hazardous jobsites. With a reputation for advanced engineering and state of the art technology, the RKI Industries' Eagle One to Six Gas Portable Monitor is an industry leader in accuracy and affordability.

Features

The Eagle One to Six Gas Portable Monitor is available with a wide variety of exclusive features. The unit is capable of PPM/LEL hydrocarbon detection and for environmental use, has a methane elimination switch. The dual hydrophobic filters (available on some models) ensure quality control. To preserve the integrity and safety of the device, the portable monitor also has an adjustment lockout switch to prevent tampering. For quick and easy testing, the monitor offers autocalibration and single gas calibration.

The Eagle is housed in an ergonomic RFI, EMI, chemical, and weather resistant polycarbonate and polyester enclosure. It can operate in the rain or in 2 inches of water without damage. It features an ergonomically designed top handle to ensure durability.

Accessories and Options

IR Sensors are available for CO2, % LEL CH4 or HC, and % volume CH4 or HC. Each unit also has datalogging capabilities for research, evaluation, and analysis of worksite atmospheres. The unit comes standard with several accessories including a shoulder strap, alkaline batteries, a hydrophobic probe, a 5 foot hose, and an internal hydrophobic filter with most models. Optional accessories can be purchased to fully customize the portable monitor to meet specific needs including a datalogging kit, remote alarms, dilution fitting, Ni-Cad batteries, battery chargers, continuous operation adapter, extra loud buzzer, extension probes, and large internal hydrophobic filter.

Specifications

The Eagle has a battery life of up to 30 hours of continuous operation with alkaline or Ni-cad capability and a sensor life of approximately 2 years. Its standard weight is approximately 5 pounds with dimensions of 10.5”L x 5.9”W x 7”H. The formidable long life pump (with a life of approximately 6,000 hours) reaches up to 125 feet in range with filters and has a low flow pump shut off and alarm. The unit has a response time of up to 30 seconds for most gases, and features a double alarm of audible alerts at 85 dB and visual alerts of dual high intensity LEDs and a flashing display screen.

The display screen is an easy to read 4 x 20 LCD readout. The backlit display sits at the top of the unit for full visibility, and displays the readings and statuses of 4 channels simultaneously.

The portable monitor is rated as intrinsically safe and has a standard 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

Eagle Specifications:
Enclosure Weatherproof, chemical resistant, RFI / EMI coated high impact polycarbonate-polyester blend. Can operate in rain or set into 2.5" of water without damage. Ergonomically balanced with rugged top mounted handle.
Dimensions 10.5" L x 5.9" W x 7" H
Weight 5 lbs (standard 4 gas with batteries)
Detection Principle Catalytic combustion, electrochemical cell, galvanic cell, and infrared.
Sensor Life 2 years under normal conditions.
Sampling Method Powerful, long-life pump (over 6,000 hours) can draw samples over 125 feet. Flow rate approximately 2.0 SCFH.
Display 4 x 20 LCD readout. Viewed through window in case top. Displays readings & status of 4 channels simultaneously. Backlight, automatic for alarms and by demand with adjustable time.
Alarms 2 alarms per channel plus TWA and STEL alarms for toxics. The two alarms are fully adjustable for levels, latching or self reset and silenceable.
Alarm Method Buzzer 85 dB at 30 cm, dual high intensity LEDs, and flashing display.
Controls 6 external glove friendly push buttons for operation, demand zero, and autocalibration. Buttons also access LEL / ppm, alarm silence, peak hold, TWA / STEL values, battery status and many other features.
Continuous Operation 30 hours minimum using alkaline batteries, or 18 hours using Ni-Cads.
Power Source 4 alkaline or Ni-Cad, size D batteries. (Charger has alkaline recognition to prevent battery damage if charging is attempted with alkalines.)
Operating Temp. & Humidity -10°C to 40°C (14°F to 104°F), 0 to 95% RH, non-condensing.
Indication Accuracy Maximum variance ± 5% of full scale.
Response Time 30 seconds to 90% (for most gases) using standard 5 ft hose.
Safety Rating Intrinsically Safe, Class I, Division 1, Groups A, B, C and D.
CSA (C / US) & UL Classified (most versions).
Standard Accessories Shoulder strap, alkaline batteries, hydrophobic probe and 5 foot hose, Internal hydrophobic filter (most versions) (certain toxic versions equipped with special probe, inlet fitting and 3' teflon hose. For HF and O3 versions, 3' PTFE hose used without probe).
Optional Accessories Datalogging of up to 4 gases (No datalogging possible on 5 or 6 gas versions or versions with more than 2 toxic sensors)
Remote alarms
Dilution fitting (50/50)
Ni-Cad batteries
Battery charger, 115 VAC, 220 VAC, or 12 VDC
Continuous operation adapter, 115 VAC or 12 VDC
Extra loud buzzer
Extension probes
Large internal hydrophobic filter
Warranty Two year material and workmanship

Gases & Detectable Ranges
Gas
Measuring Range
Accuracy
Which ever is greater
Standard Confined Space Gases
Hydrocarbons (CH4, std) 0 - 100% LEL ± 5% of reading or ± 2% LEL (*)
0 - 50,000 ppm ± 25 ppm or ± 5% of reading (*)
Oxygen (O2) 0 - 40% Vol. ± 0.5% O2
Carbon Monoxide (CO) 0 - 500 ppm ± 5% of reading or ± 5 ppm CO (*)
Hydrogen Sulfide (H2S) 0 - 100 ppm ± 5% of reading or ± 2 ppm H2S (*)
Super Toxics and Other Gases
Ammonia (NH3) 0 - 75 ppm ± 10% of reading or ± 5% of full scale (*)
Arsine (AsH3) 0 - 1 ppm
0 - 200 ppb
Chlorine (Cl2) 0 - 3 ppm
Chlorine Dioxide (ClO2) 0 - 1 ppm
Fluorine (F2) 0 - 5 ppm
Hydrogen Fluoride (HF) 0 - 9 ppm
Hydrogen Chloride (HCl) 0 - 15 ppm
Hydrogen Cyanide (HCN) 0 - 30 ppm
Hydrogen Selenide (H2Se) 0 - 0.2 ppm
Hydrogen Sulfide (H2S) 0 - 1 ppm
0 - 30 ppm
Nitrogen Dioxide (NO2) 0 - 15 ppm
Ozone (O3) 0 - 1 ppm
Nitric Oxide (NO) 0 - 100 ppm
Phosphine (PH3) 0 - 1 ppm
Silane (SiH4) 0 - 15 ppm
Sulfur Dioxide (SO2) 0 - 6 ppm
IR Sensors
Carbon Dioxide (CO2)(IR Sensor) 0 - 5,000 ppm
0 - 10,000 ppm
0 - 5% Vol.
0 - 20% Vol.
0 - 60% Vol.
± 5% of reading or ± 2% of full scale (*)
Methane (CH4)(IR Sensor) 0 - 100% LEL
0 - 100% Vol.
Isobutane (iC4H10)(IR Sensor) 0 - 100% LEL
0 - 30% Vol.

Questions & Answers


1 Question & 1 Answer
Hector Preciado
from MEXICO asked:
June 2, 2016
Hi, do we need to buy probes for this detector? Does it detect real time or only per event/probe? Thanks
1 Answer
The Eagle and Eagle 2 meters do not require probes. The meter can be used with or without probes and with or without remote sampling lines. The readings are real-time.
Submitted by: Customer Service on June 3, 2016