1-866-4 JJSTECH(1-866-455-7832)

  1. Home
  2. Bacharach
  3. Fixed Gas Monitors
  4. MGS-400 Series
  5. MGS-410 Gas Detectors

MGS-410 Gas Detectors

Results: 1-24 of 45
Filter by Category
Items per page:
Sort by:
  1. Bacharach 6302-0003 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - O2, 0-30%, Low Alarm, Electro-ChemicalQUICK VIEW

    Bacharach 6302-0003 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - O2, 0-30%, Low Alarm, Electro-Chemical

    Brand: Bacharach | Item #: 6302-0003

    $848.90
  2. Bacharach 6302-0026 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-100 ppm, Electro-ChemicalQUICK VIEW

    Bacharach 6302-0026 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-100 ppm, Electro-Chemical

    Brand: Bacharach | Item #: 6302-0026

    $848.90
  3. Bacharach 6302-0028 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-1,000 ppm, LO TEMP, Electro-ChemicalQUICK VIEW

    Bacharach 6302-0028 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-1,000 ppm, LO TEMP, Electro-Chemical

    Brand: Bacharach | Item #: 6302-0028

    $848.90
  4. Bacharach 6302-0029 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-300 ppm, Electro-ChemicalQUICK VIEW

    Bacharach 6302-0029 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-300 ppm, Electro-Chemical

    Brand: Bacharach | Item #: 6302-0029

    $839.80
  5. Bacharach 6302-0040 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO, 0-500 ppm, Electro-ChemicalQUICK VIEW

    Bacharach 6302-0040 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO, 0-500 ppm, Electro-Chemical

    Brand: Bacharach | Item #: 6302-0040

    $839.80
  6. Bacharach 6302-0041 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NO2, 0-20 ppm, Electro-ChemicalQUICK VIEW

    Bacharach 6302-0041 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NO2, 0-20 ppm, Electro-Chemical

    Brand: Bacharach | Item #: 6302-0041

    $839.80
  7. Bacharach 6302-0052 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R600, 0-100% LEL, InfraredQUICK VIEW

    Bacharach 6302-0052 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R600, 0-100% LEL, Infrared

    Brand: Bacharach | Item #: 6302-0052

    $807.30
  8. Bacharach 6302-0053 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CH4, 0-100% LEL, InfraredQUICK VIEW

    Bacharach 6302-0053 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CH4, 0-100% LEL, Infrared

    Brand: Bacharach | Item #: 6302-0053

    $807.30
  9. Bacharach 6302-0054 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R290, 0-100% LEL, InfraredQUICK VIEW

    Bacharach 6302-0054 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R290, 0-100% LEL, Infrared

    Brand: Bacharach | Item #: 6302-0054

    $807.30
  10. Bacharach 6302-0070 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-100% LEL, Catalytic BeadQUICK VIEW

    Bacharach 6302-0070 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-100% LEL, Catalytic Bead

    Brand: Bacharach | Item #: 6302-0070

    $880.10
  11. Bacharach 6302-0090 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-5,000ppm, InfraredQUICK VIEW

    Bacharach 6302-0090 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-5,000ppm, Infrared

    Brand: Bacharach | Item #: 6302-0090

    $793.00
  12. Bacharach 6302-0091 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-10,000ppm, InfraredQUICK VIEW

    Bacharach 6302-0091 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-10,000ppm, Infrared

    Brand: Bacharach | Item #: 6302-0091

    $793.00
  13. Bacharach 6302-0092 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-20,000ppm, InfraredQUICK VIEW

    Bacharach 6302-0092 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-20,000ppm, Infrared

    Brand: Bacharach | Item #: 6302-0092

    $838.50
  14. Bacharach 6302-0093 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-30,000ppm, InfraredQUICK VIEW

    Bacharach 6302-0093 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-30,000ppm, Infrared

    Brand: Bacharach | Item #: 6302-0093

    $838.50
  15. Bacharach 6302-0094 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-40,000ppm, InfraredQUICK VIEW

    Bacharach 6302-0094 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-40,000ppm, Infrared

    Brand: Bacharach | Item #: 6302-0094

    $643.50
  16. Bacharach 6302-0095 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-50,000ppm, InfraredQUICK VIEW

    Bacharach 6302-0095 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-50,000ppm, Infrared

    Brand: Bacharach | Item #: 6302-0095

    $838.50
  17. Bacharach 6302-0101 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R134a, 0-1,000ppm, Semi-conductorQUICK VIEW

    Bacharach 6302-0101 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R134a, 0-1,000ppm, Semi-conductor

    Brand: Bacharach | Item #: 6302-0101

    $417.30
  18. Bacharach 6302-0103 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R404A, 0-1,000ppm, Semi-conductorQUICK VIEW

    Bacharach 6302-0103 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R404A, 0-1,000ppm, Semi-conductor

    Brand: Bacharach | Item #: 6302-0103

    $417.30
  19. Bacharach 6302-0105 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R407A, 0-1,000ppm, Semi-conductorQUICK VIEW

    Bacharach 6302-0105 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R407A, 0-1,000ppm, Semi-conductor

    Brand: Bacharach | Item #: 6302-0105

    $417.30
  20. Bacharach 6302-0107 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R410A, 0-1,000ppm, Semi-conductorQUICK VIEW

    Bacharach 6302-0107 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R410A, 0-1,000ppm, Semi-conductor

    Brand: Bacharach | Item #: 6302-0107

    $417.30
  21. Bacharach 6302-0109 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R22, 0-1,000ppm, Semi-conductorQUICK VIEW

    Bacharach 6302-0109 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R22, 0-1,000ppm, Semi-conductor

    Brand: Bacharach | Item #: 6302-0109

    $417.30
  22. Bacharach 6302-0111 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R507A, 0-1,000ppm, Semi-conductorQUICK VIEW

    Bacharach 6302-0111 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R507A, 0-1,000ppm, Semi-conductor

    Brand: Bacharach | Item #: 6302-0111

    $417.30
  23. Bacharach 6302-0123 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R407C, 0-1,000ppm, Semi-conductorQUICK VIEW

    Bacharach 6302-0123 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R407C, 0-1,000ppm, Semi-conductor

    Brand: Bacharach | Item #: 6302-0123

    $417.30
  24. Bacharach 6302-0126 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R407F, 0-1,000ppm, Semi-conductorQUICK VIEW

    Bacharach 6302-0126 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R407F, 0-1,000ppm, Semi-conductor

    Brand: Bacharach | Item #: 6302-0126

    $417.30
Bacharach 6302-0003 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - O2, 0-30%, Low Alarm, Electro-Chemical
View Product Details >

Bacharach 6302-0003 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - O2, 0-30%, Low Alarm, Electro-Chemical




Item #6302-0003
BrandBacharach
Price: $848.90
Quantity:

6302-0003 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - O2, 0-30%, Low Alarm, Electro-Chemical by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0026 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-100 ppm, Electro-Chemical
View Product Details >

Bacharach 6302-0026 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-100 ppm, Electro-Chemical




Item #6302-0026
BrandBacharach
Price: $848.90
Quantity:

6302-0026 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-100 ppm, Electro-Chemical by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0028 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-1,000 ppm, LO TEMP, Electro-Chemical
View Product Details >

Bacharach 6302-0028 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-1,000 ppm, LO TEMP, Electro-Chemical




Item #6302-0028
BrandBacharach
Price: $848.90
Quantity:

6302-0028 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-1,000 ppm, LO TEMP, Electro-Chemical by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0029 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-300 ppm, Electro-Chemical
View Product Details >

Bacharach 6302-0029 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-300 ppm, Electro-Chemical




Item #6302-0029
BrandBacharach
Price: $839.80
Quantity:

6302-0029 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-300 ppm, Electro-Chemical by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0040 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO, 0-500 ppm, Electro-Chemical
View Product Details >

Bacharach 6302-0040 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO, 0-500 ppm, Electro-Chemical




Item #6302-0040
BrandBacharach
Price: $839.80
Quantity:

6302-0040 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO, 0-500 ppm, Electro-Chemical by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0041 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NO2, 0-20 ppm, Electro-Chemical
View Product Details >

Bacharach 6302-0041 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NO2, 0-20 ppm, Electro-Chemical




Item #6302-0041
BrandBacharach
Price: $839.80
Quantity:

6302-0041 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NO2, 0-20 ppm, Electro-Chemical by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0052 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R600, 0-100% LEL, Infrared
View Product Details >

Bacharach 6302-0052 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R600, 0-100% LEL, Infrared




Item #6302-0052
BrandBacharach
Price: $807.30
Quantity:

6302-0052 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R600, 0-100% LEL, Infrared by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0053 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CH4, 0-100% LEL, Infrared
View Product Details >

Bacharach 6302-0053 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CH4, 0-100% LEL, Infrared




Item #6302-0053
BrandBacharach
Price: $807.30
Quantity:

6302-0053 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CH4, 0-100% LEL, Infrared by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0054 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R290, 0-100% LEL, Infrared
View Product Details >

Bacharach 6302-0054 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R290, 0-100% LEL, Infrared




Item #6302-0054
BrandBacharach
Price: $807.30
Quantity:

6302-0054 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R290, 0-100% LEL, Infrared by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0070 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-100% LEL, Catalytic Bead
View Product Details >

Bacharach 6302-0070 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-100% LEL, Catalytic Bead




Item #6302-0070
BrandBacharach
Price: $880.10
Quantity:

6302-0070 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-100% LEL, Catalytic Bead by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0090 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-5,000ppm, Infrared
View Product Details >

Bacharach 6302-0090 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-5,000ppm, Infrared




Item #6302-0090
BrandBacharach
Price: $793.00
Quantity:

6302-0090 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-5,000ppm, Infrared by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0091 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-10,000ppm, Infrared
View Product Details >

Bacharach 6302-0091 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-10,000ppm, Infrared




Item #6302-0091
BrandBacharach
Price: $793.00
Quantity:

6302-0091 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-10,000ppm, Infrared by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0092 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-20,000ppm, Infrared
View Product Details >

Bacharach 6302-0092 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-20,000ppm, Infrared




Item #6302-0092
BrandBacharach
Price: $838.50
Quantity:

6302-0092 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-20,000ppm, Infrared by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0093 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-30,000ppm, Infrared
View Product Details >

Bacharach 6302-0093 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-30,000ppm, Infrared




Item #6302-0093
BrandBacharach
Price: $838.50
Quantity:

6302-0093 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-30,000ppm, Infrared by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0094 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-40,000ppm, Infrared
View Product Details >

Bacharach 6302-0094 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-40,000ppm, Infrared




Item #6302-0094
BrandBacharach
Price: $643.50
Quantity:

6302-0094 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-40,000ppm, Infrared by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0095 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-50,000ppm, Infrared
View Product Details >

Bacharach 6302-0095 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-50,000ppm, Infrared




Item #6302-0095
BrandBacharach
Price: $838.50
Quantity:

6302-0095 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - CO2, 0-50,000ppm, Infrared by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0101 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R134a, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0101 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R134a, 0-1,000ppm, Semi-conductor




Item #6302-0101
BrandBacharach
Price: $417.30
Quantity:

6302-0101 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R134a, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0103 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R404A, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0103 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R404A, 0-1,000ppm, Semi-conductor




Item #6302-0103
BrandBacharach
Price: $417.30
Quantity:

6302-0103 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R404A, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0105 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R407A, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0105 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R407A, 0-1,000ppm, Semi-conductor




Item #6302-0105
BrandBacharach
Price: $417.30
Quantity:

6302-0105 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R407A, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0107 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R410A, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0107 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R410A, 0-1,000ppm, Semi-conductor




Item #6302-0107
BrandBacharach
Price: $417.30
Quantity:

6302-0107 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R410A, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0109 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R22, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0109 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R22, 0-1,000ppm, Semi-conductor




Item #6302-0109
BrandBacharach
Price: $417.30
Quantity:

6302-0109 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R22, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0111 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R507A, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0111 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R507A, 0-1,000ppm, Semi-conductor




Item #6302-0111
BrandBacharach
Price: $417.30
Quantity:

6302-0111 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R507A, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0123 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R407C, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0123 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R407C, 0-1,000ppm, Semi-conductor




Item #6302-0123
BrandBacharach
Price: $417.30
Quantity:

6302-0123 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R407C, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0126 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R407F, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0126 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R407F, 0-1,000ppm, Semi-conductor




Item #6302-0126
BrandBacharach
Price: $417.30
Quantity:

6302-0126 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R407F, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0152 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R1234ze, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0152 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R1234ze, 0-1,000ppm, Semi-conductor




Item #6302-0152
BrandBacharach
Price: $417.30
Quantity:

6302-0152 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R1234ze, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0155 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R32, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0155 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R32, 0-1,000ppm, Semi-conductor




Item #6302-0155
BrandBacharach
Price: $417.30
Quantity:

6302-0155 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R32, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0156 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R448A, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0156 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R448A, 0-1,000ppm, Semi-conductor




Item #6302-0156
BrandBacharach
Price: $417.30
Quantity:

6302-0156 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R448A, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0157 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R452A, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0157 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R452A, 0-1,000ppm, Semi-conductor




Item #6302-0157
BrandBacharach
Price: $417.30
Quantity:

6302-0157 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R452A, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0158 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R513A, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0158 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R513A, 0-1,000ppm, Semi-conductor




Item #6302-0158
BrandBacharach
Price: $417.30
Quantity:

6302-0158 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R513A, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0159 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R434A, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0159 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R434A, 0-1,000ppm, Semi-conductor




Item #6302-0159
BrandBacharach
Price: $417.30
Quantity:

6302-0159 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R434A, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0160 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R450A, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0160 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R450A, 0-1,000ppm, Semi-conductor




Item #6302-0160
BrandBacharach
Price: $417.30
Quantity:

6302-0160 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R450A, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0161 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R1234yf, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0161 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R1234yf, 0-1,000ppm, Semi-conductor




Item #6302-0161
BrandBacharach
Price: $417.30
Quantity:

6302-0161 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R1234yf, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0163 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R452B, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0163 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R452B, 0-1,000ppm, Semi-conductor




Item #6302-0163
BrandBacharach
Price: $417.30
Quantity:

6302-0163 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R452B, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0164 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R454A, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0164 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R454A, 0-1,000ppm, Semi-conductor




Item #6302-0164
BrandBacharach
Price: $417.30
Quantity:

6302-0164 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R454A, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0165 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R422, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0165 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R422, 0-1,000ppm, Semi-conductor




Item #6302-0165
BrandBacharach
Price: $417.30
Quantity:

6302-0165 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R422, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0166 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R422D, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0166 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R422D, 0-1,000ppm, Semi-conductor




Item #6302-0166
BrandBacharach
Price: $417.30
Quantity:

6302-0166 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R422D, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0167 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R427A, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0167 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R427A, 0-1,000ppm, Semi-conductor




Item #6302-0167
BrandBacharach
Price: $417.30
Quantity:

6302-0167 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R427A, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0169 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R449A, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0169 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R449A, 0-1,000ppm, Semi-conductor




Item #6302-0169
BrandBacharach
Price: $417.30
Quantity:

6302-0169 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R449A, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0170 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R454C, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0170 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R454C, 0-1,000ppm, Semi-conductor




Item #6302-0170
BrandBacharach
Price: $417.30
Quantity:

6302-0170 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R454C, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0171 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R454B, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0171 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R454B, 0-1,000ppm, Semi-conductor




Item #6302-0171
BrandBacharach
Price: $417.30
Quantity:

6302-0171 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R454B, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach 6302-0172 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R455A, 0-1,000ppm, Semi-conductor
View Product Details >

Bacharach 6302-0172 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R455A, 0-1,000ppm, Semi-conductor




Item #6302-0172
BrandBacharach
Price: $417.30
Quantity:

6302-0172 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R455A, 0-1,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-5,000 ppm, Electro-Chemical - 6302-0037
View Product Details >

Bacharach MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-5,000 ppm, Electro-Chemical - 6302-0037




Item #6302-0037
BrandBacharach
Price: $839.80
Quantity:

6302-0037 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-5,000 ppm, Electro-Chemical by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-3% Vol, Catalytic Bead - 6302-0069
View Product Details >

Bacharach MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-3% Vol, Catalytic Bead - 6302-0069




Item #6302-0069
BrandBacharach
Price: $880.10
Quantity:

6302-0069 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - NH3, 0-3% Vol, Catalytic Bead by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R290, 0-5,000ppm, Semi-conductor - 6302-0301
View Product Details >

Bacharach MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R290, 0-5,000ppm, Semi-conductor - 6302-0301




Item #6302-0301
BrandBacharach
Price: $417.30
Quantity:

6302-0301 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R290, 0-5,000ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Bacharach MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R290, 0-2,500ppm, Semi-conductor - 6302-0310
View Product Details >

Bacharach MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R290, 0-2,500ppm, Semi-conductor - 6302-0310




Item #6302-0310
BrandBacharach
Price: $417.30
Quantity:

6302-0310 MGS-410 Gas Detector - IP66, Modbus Output, Audible & Visual Alarms - R290, 0-2,500ppm, Semi-conductor by Bacharach

Bacharach's MGS-400 Gas Detectors makes compliance with mechanical equipment room and refrigeration safety codes simple and easy, saving time and money on equipment and installation. Using the MGS-400 App, users can intuitively use, commission and maintain their gas detection system without the need for specialty training or tools. Pre-calibrated sensor modules simplify maintenance, take minutes to exchange and do not require the use of calibration gas. The MGS-400 sensors can trigger additional audio-visual alarms and act as a standalone gas detection system, or integrate easily into a BMS / BAS or with Bacharach's optional MGS-408 Gas Detection Controller.

Features

  • Mobile App Interface
  • Pre-calibrated Sensors
  • Semi-automated Calibration
  • Remote Sensor Option
  • Temperature-Compensated Measurement
  • Low Temperature Performance
  • Digital Communications
  • Analog Outputs
  • Relay outputs
  • Audio & Visual Alarms
  • Multiple Cable Entries and Terminals

Benefits

  • Quick, easy and intuitive commissioning, configuration and maintenance requires no special training. No tools required to set alarm levels and behavior
  • Fast and easy sensor maintenance. Eliminates need for calibration gas.
  • Easy calibration process with mobile app. Generate calibration certificates for documentation.
  • Locate the sensor element in hard-to-reach areas and the base unit where convenient for electrical and communication wiring (MGS-460)
  • Mitigates false alarms and optimizes accuracy in refrigeration applications.
  • Suitable for use in cold rooms and freezers down to -40° F/C.
  • Integrate with local BMS/BAS via Modbus RTU
  • For current or voltage output to legacy systems (MGS-450/460)
  • 3 relays available for alarm and fault events to active horn/strobes and ventilation (MGS-450, MGS-460)
  • On-board alarm notification supports compliance with ASHRAE 15 / EN 378
  • Quick and easy installation of all wiring; daisy-chain power and digital communications.
Results: 1-24 of 45
Items per page:
Sort by:
JJS Technical Services
JJS Technical Services 1900 East Golf Rd., Suite 950 Schaumburg, IL 60173

1-866-4 JJSTECH (1-866-455-7832) sales@jjstech.com

Company
Orders
More
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
Ask an Expert

1-866-4 JJSTECH(1-866-455-7832)

Email Us
  • HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  • Authorize.Net Merchant - Click to Verify

Copyright ©2000-2023. JJS Technical Services. Logos and Trademarks are the property of their respective owners. All Rights Reserved.