1-866-4 JJSTECH(1-866-455-7832)

BW Technologies BW Clip 2 Year Single Gas Detector, Sulfur Dioxide (SO2), Low - 5 ppm / High - 10 ppm

Item #:
BW Technologies
Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
BW Technologies BW Clip 2 Year Single Gas Detector, Sulfur Dioxide (SO2), Low - 5 ppm / High - 10 ppm

BW Technologies BW Clip 2 Year Single Gas Detector, Sulfur Dioxide (SO2), Low - 5 ppm / High - 10 ppm


BWC2-S BW Clip 2 Year Single Gas Detector, Sulfur Dioxide (SO2), Low - 5 ppm / High - 10 ppm by BW Technologies

Do you need a portable SO2 gas detector that is user friendly and durable? The maintenance free BWC2-S is designed to give you safe and dependable operation for two full years. It contains all you need for accurate sulfur dioxide detection.

To use your gas detector, just turn it on, and that is it. No calibration or battery charging is needed. In fact, you never change batteries. This gives you dependable gas detection without downtime.

You may use your BWC2-S with Fleet Manager II programs, and MicroDock II or IntelliDoX systems for instrument managing. It has Reflex Technology™ for daily self diagnostics and Surecell™ for fast performance.

Configuring the BWC2-S

It is easy to configure this gas detector, and the alarm set points can be adjusted before you activate it for use. Here are some of the features:

  • Chirp for non compliance
  • Adjustable set points and parameters as long as the unit is in operation
  • If you want to use the noncompliance indicator feature, it can be set to flash red each time you need a bump test.
  • You can adjust the monitor to give you the gas reading when it sounds an alarm.
  • The monitor will also function as a clock when you set the display for the time.

Why Invest in the BWC2-S for Gas Detection?

  • Easy recordkeeping
  • Test multiple units at once
  • No maintenance – battery and sensor last as long as the unit
  • Can perform in all kinds of harsh conditions (122F to -30F)
  • Light and convenient to carry – weighs less than 1/4 pound
  • Easy operation – just one button
  • Auto-test features
  • Easy to see wide angle flashing alarm
  • Autolog last 35 events and bump tests
  • Low operation and ownership costs
  • Audible, vibrating, and visual alarm

The BWC2-S comes with two reservoir Surecell™ sensor technology that delivers improved response time, performance, and long life. Compared to a standard electromechanical sensor, the Surecell™ outperforms hands down.

Part Number: BWC2S

BW Clip Specifications
Size 1.6 x 2.0 x 3.4 in. / 4.1 x 5.0 x 8.7 cm
Weight 3.2 oz. / 92 g
Temperature H2S: -40 to +122°F / -40 to +50°C
CO: -22 to +122°F / -30 to +50°C
O2: -4 to +122°F / -20 to +50°C
SO2: -22 to +122°F / -30 to +50°C
Humidity 5% - 95% RH (non-condensing)
Alarms Visual, vibrating, audible (95 dB) • Low, High
Tests Activated detectors automatically perform one internal diagnostic test every 24 hours.
Typical battery life Two years (H2S, CO, O2 or SO2) or three years (H2S or CO)
Event logging 35 most recent events
Ingress Protection IP 66/67
Warranty Two or three years from activation (given normal operation), plus one year shelf life (6 months for O2). Up to three years for two-year H2S and CO detectors when used with the hibernation feature, limited to 24 months of detector operation.

Sensor Specifications
Measuring Range
Low Alarm Level
High Alarm Level
2 or 3 year detector
0 -100 ppm
10 ppm
15 ppm
0 - 300 ppm
35 ppm
200 ppm
2 year detector only
0 - 25.0 % by vol.
19.5 %
23.5 %
0 - 100 ppm
5 ppm
10 ppm

Datasheets & User Manuals

Questions & Answers

There are no questions or answers for this item.