Celestron NexStar RS-232 Cable - 93920

93920 NexStar RS-232 Cable by Celestron

The Celestron RS-232 Cable is used to connect your PC or computer to NexStar computerized telescopes via a port in the hand control. The large adapter attaches to the serial port of your computer. If your computer does not have a serial port, you will need a Serial-to-USB Adapter (#18775) so that you can connect the RS-232 Cable via a USB port instead. The other end of the cable terminates in a phone-jack style plug, and simply snaps into the port designed for this purpose.

Once you have connected your computer and telescope, you can update your hand control firmware. The latest updates can be found in the Support section of this website.

Connecting a computer to your telescope will also allow you to navigate the telescope from your computer screen! There are many software programs available today that will not only display the night sky as it appears on any chosen observing night, but that will allow you to send your telescope to any object on the screen with the click of a button.

• The Celestron RS-232 Cable connects your computerized telescope to a laptop or PC for control via various planetarium software programs.
• Attaches to the computer's serial port and the telescope's hand control via a phone jack plug.
• The Celestron NexStar RS-232 Cable is also necessary for flash upgrades to hand control software.
• Cable is 62 inches long.
• Requires a Serial-to-USB Adapter (#18775) if your computer does not have a serial port.