1-866-4 JJSTECH(1-866-455-7832)

Draeger X-am 3500 Multi-Gas Detector, Ex, O2, H2S LC (without charging equipment) - 8328414

Item #:
DR-8328414
Brand:
Draeger
$2,241.00
Qty
Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
Draeger X-am 3500 Multi-Gas Detector, Ex, O2, H2S LC (without charging equipment) - 8328414

Draeger X-am 3500 Multi-Gas Detector, Ex, O2, H2S LC (without charging equipment) - 8328414

$2,241.00

8328414 X-am 3500 Multi-Gas Detector, Ex, O2, H2S LC (without charging equipment) by Draeger

The Draeger X-am® 3500 was especially designed for clearance measurements. The 1 to 4 gas detector reliably detects flammable gases and vapours as well as O2, CO, H2S, NO2 and SO2. The innovative signalling design and extensive range of accessories ensure optimum safety and easy handling.

Specially designed for use with a pump, optimised for clearance measurement

The Draeger X-am 3500 is equipped with a very powerful pump. It can be connected with hoses of up to 45 metres in length. A pump adapter makes it easy to switch between diffusion and pump mode at any time. This means the pump is only operated when you actually need it. That saves energy, reduces wear and tear, and thereby extends the lifespan of the pump.

The performance of selected sensors has been verified by an external approval body within the scope of the measurement performance approval (EN 60079-29-1), for combustible gases and vapours for methane, propane and n-nonane, among others.

Handy and durable, the Draeger X-am 3500 is intuitive to operate single-handedly using three function keys. The easy-to-read colour display clearly lays out all the information for you. Thanks to its compact and robust construction, the device can withstand even the harshest conditions.

Clear signalling design

The signal system of the Draeger X-am 3500 is based on a clear colour code, in accordance with the requirements of the EN 60079-29-1, EN 45544-1 and EN 50104:

  • Red light = gas alarm
  • Yellow light = device-related alarm, e.g. low battery
  • Green light = device is ready for use

The green glow of the D-Light allows you to see from a distance whether the device has been properly tested and is ready for use.

In case of an alarm, the X-am 3500 alerts you with colourful alarm LEDs, a loud horn (100 dB(A) at a distance of 30 cm), and clearly palpable vibration. Optionally, four preset hazard symbols are available for the display which explicitly indicate the presence of explosive or toxic gas hazards, for example. This allows the user to easily recognise the type of hazard based purely on the symbol displayed.

Economical Fleet Management

Bumptest and calibration are carried out simply and quickly using the Draeger X-dock® calibrating station. Its low test gas consumption keeps operating costs to a minimum.

Its reporting function and numerous other useful features make the X-dock Manager PC software a smart addition to any fleet management operation. To identify the devices in the fleet, you can either use tried and tested barcodes or an integrated RFID transponder.

Inductive charging protects against wear and tear

The X-am 3500 features inductive charging. This makes it easier to operate and increases the lifespan of the device. Issues like corrosion and contact problems in the charging cradle are a thing of the past. You can charge (outside of explosion-hazard zones) and measure at once, e.g, when in use inside vehicles or on machinery. The charging cradle can connect with one another, taking up minimal space, and are compatible with existing Draeger X-am® series cradles.

Dimensions (H x W x D) 179 x 77 x 42 mm
Weight Approx. 495 g, depending on sensor configuration, without strap, without pump
Approx. 550 g, depending on sensor configuration, without strap, with pump
Housing Durable two-component housing
Display High-contrast colour display
Temperature - 20 °C to + 50 °C
Pressure 700 to 1.300 hPa (measuring function)
800 to 1,100 hPa (use in explosion-hazard areas)
Relative humidity 10 to 90 % (short-term up to 95 %) r.h.
Alarms Visual: 3 LED 'red' (gas alarms), 3 LED 'yellow' (device alarms)
Acoustic: Multi-tone, typically 100 dB(A) at 30 cm
Vibration
Ingress protection class IP 68
Energy supply Lithium-ion battery, rechargeable, inductive charging
Operating times (Diffusion) With CatEx and 3 EC sensors: Typically 24 hours
With 3 EC-sensors: Typically 120 hours
Charging times Typically 4 hours after use during a shift of max. 10 hours
Start-up times Typically <60 seconds for standard sensors
Data storage 24 MB, e.g. at 10 minutes per hour of gas exposure with measuring values changing by the second on all 4 channels: approx. 600 hours
Pump operation Max. hose length 45 m
Approvals Marking Explosion Protection:
ATEX / IECEx: I M1, II 1G; Ex da ia I Ma, Ex da ia IIC T4 Ga
EAC: PO Ex da ia I Ma X; 0Ex da ia IIC T4 Ga X
cCSAus: Class I, Zone 0, AEx da ia IIC T4 Ga; Class II, Div 1, Gr. E, F, G; C22.2 No. 152, ANSI-ISA 12.13.01:2000
ANZEx: Ex da ia I Ma, Ex da ia IIC T4 Ga

Measurement Performance:
Explosion protection according ATEX: EN 60079-29-1 (CatEx 125 PR, CatEx 125 PR Gas) CatEx 125 PR: methane, propane, nnonane, etc. The following applies to the CatEx 125 PR and approved gas "n-nonane": Only in conjunction with pump adapter "Nonan", part number: 3720225
Oxygen deficieny/excess oxygen: EN 50104 (XXS O2)
Toxic gases: EN 45544-1, EN 45544-2, EN 45544-3 (XXS H2S LC, XXS CO LC)
Software: EN 50271

Directives:
2014/34/EU (ATEX)
2014/30/EU (EMV)
2011/65/EU (RoHS)
2014/90/EU (MED)

Marine Approval: DNV GL
Manufacturer´s warranty 3 years for the device

Datasheets & User Manuals

Questions & Answers