- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Gas Monitor Categories
- Single-Gas Monitors
- Multi-Gas Monitors
- Zero Maintenance Monitors
- Fixed System Gas Monitors
- Confined Space Kits
- Wireless Fixed Point Gas Detectors
- Hydrogen Sulfide (H2S) Monitors
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Extech CT40 Cable Identifier/Tester Kit
Item #:
EXT-CT40
Brand:
Extech
Share this product:
CT40 Cable Identifier/Tester Kit by Extech
Features
- Transmitter/Receiver enables one person to remotely identify up to 16 wires
- Wire voltage check from 5 to 16VDC
- MultiMeter functions include: AC/DC Voltage and Current, Resistance, Diode, and Continuity
- Data Hold and Max Hold
- Auto power off
- Low battery indicator (transmitter and receiver)
- CAT III-600V safety rating
- Complete with 16-line Transmitter, MultiMeter/Receiver, two 9V batteries, pouch case, and 2 AAA batteries
| Max input voltage | 600V AC/DC |
| Diode Test | Test current 1mA max., open circuit voltage of 1.5V typical |
| Continuity Check | Audible threshold between 15Ω and 200Ω |
| Display | 2000 count 3 -1/2 digit LCD |
| Over range indication | LCD displays "OL" |
| Polarity | Minus (-) sign for negative polarity |
| Low Battery Indication | "BAT" symbol indicates low battery condition |
| Input Impedance | >7.5MΩ (VDC & VAC) |
| AC Response | Average responding |
| ACV Bandwidth | 50Hz to60Hz |
| Auto Power Off | 15 minutes (approximately) |
| Fuse | mA, µA ranges; 0.2A/250V fast acting Fuse |
| Batteries | 9V battery and two "AAA" batteries |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -10°C to 50°C (14°F to 122°F) |
| Weight | 308g (10.8 oz`) |
| Size | 162x74.5x44.0mm (6.3x2.9x1.7") |
| Standards | IEC61010-1 CAT III-600V Pollution degree II, CE Approved |
| Display | Two red LED lamps |
| Alligators | 17Croc clips-red*16, black*1 |
| Cable resistance | 30K Ohm max |
| Power | 9V battery |
| Power current | 1.8mA |
| Operating temperature | 0°C to 40°C (32°F to 104°F) |
| Storage temperature | -10°C to 50°C (14F to 122°F) |
| Display | Two digit blue LED display |
| Alligators | 2 Croc clips-red*1, black*1 |
| Power | 9V battery |
| Power current | 23mA |
| Operating temperature | 0°C to 40°C (32°F to 104°F) |
| Storage temperature | -10°C to 50°C (14°F to 122°F) |
| Continuity test | Audible threshold between 15Ω and 1000Ω |
| Cable voltage check | 5V to 16V DC |
Function |
Range |
Accuracy |
| DC Voltage | 200mV |
±(0.5% rdg + 3d) |
2.000V, 20.00V |
±(1.0% rdg + 3d) |
|
200.0V, 600V |
±(1.0% rdg + 3d) |
|
| AC Voltage 50-60Hz | 2.000V, 20.00V |
±(1.0% rdg + 5d) |
200.0V, 600V |
±(1.5% rdg + 10d) |
|
| DC Current | 200.0µA, 2000µA |
±(1.5% rdg + 3d) |
20.00mA, 200.0mA |
±(2.0% rdg + 3d) |
|
| AC Current | 200.0µA, 2000µA |
±(1.8% rdg + 8d) |
20.00mA, 200.0mA |
±(2.5% rdg + 8d) |
|
| Resistance | 200.0Ω |
±(0.8% rdg + 5d) |
2.000kΩ, 20.00kΩ, 200.0kΩ |
±(1.2% rdg + 3d) |
|
2.000MΩ |
±(2.0% rdg + 5d) |
|
20.00MΩ |
±(5.0% rdg + 8d) |
