Extech EX205T TrueRMS Digital Multimeter with NIST

Item #:

EXT-EX205T-NIST

Brand:

Extech

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us

Share this product:

Description

EX205T TrueRMS Digital Multimeter with NIST by Extech

Both models are autoranging True RMS meters providing a more accurate reading when measuring distorted waveforms. EX210T with built-in IR Thermometer allows for quick noncontact Temperature measurements.

Features

True RMS for better accuracy when measuring distorted waveforms
Patented built-in IR Thermometer with laser pointer for locating hot spots with 4:1 Distance to Target Ratio (EX210T model only)
2000 count large backlit dual LCD with easy-to read digits
Low current capability with resolution to 0.1μA
Max Hold
Input fuse protection
Auto power off and Data Hold
Complete with test leads and 9V battery

Specifications

General Specifications

Enclosure	Double molded
Diode Test	Test current of 0.9mA maximum, open circuit voltage 2.8V DC typical
Continuity	Threshold 20 to 50Ω, test current <1.5mA
Input Impedance	10MΩ VDC/VAC
AC Response	True rms
ACV Bandwidth	40Hz to 1000Hz
Display	2,000 count backlit liquid crystal display
Over-range indication	"OL" is displayed
Auto Power Off	15 minutes (approximately)
Polarity	Automatic (no indication for positive); Minus (-) sign for negative
Measurement Rate	2 times per second, nominal
Battery	One 9 volt (NEDA 1604) battery
Fuses	mA, µA ranges; 200mA 250V ceramic fast blow A range; 10A 600V ceramic fast blow
Operating Temperature	-10°C to 40°C (14°F to 122°F)
Storage Temperature	-10°C to 60°C (14°F to 140°F)
Operating Humidity	Max 80% up to 31°C (87°F) decreasing linearly to 50% at 40°C (104°F)
Storage Humidity	<80%
Operating Altitude	2000 meters (7000 ft) maximum
Weight	260g (9.17oz)
Size	147 x 76 x 42mm (5.8 x 2.9 x 1.6")
Safety	This meter is intended for origin of installation use and protected, against the users, by double insulation per IEC/EN 61010-1:2001 and IEC/EN 61010-031:2002 to Category III 600V; Pollution Degree 2.
Approvals	CE

Range Specifications

Function	Range	Resolution	Accuracy
DC Voltage	200 mV	0.1 mV	±(0.8% reading + 6 digits)
	2V	0.001V	±(0.5% reading + 2 digits)
	20V	0.01V	±(0.5% reading + 2 digits)
	200V	0.1V	±(0.8% reading + 2 digits)
	600V	1V	±(0.8% reading + 2 digits)
AC Voltage 50/60Hz	200 mV	0.1 mV	±(1.5% reading + 6 digits)
	2V	0.001V
	20V	0.01V
	200V	0.1V
	600V	1V
	All AC voltage ranges are specified from 5% of range to 100% of range
DC Current	200 µA	0.1 µA	±(1.5% reading + 5 digits)
	2000 µA	1 µA
	20 mA	0.01 mA
	200 mA	0.1 mA
	2.000	0.001 A	±(2.5% reading + 5 digits)
	10 A	0.01 A	±(2.5% reading + 5 digits)
	Note:10A for 30 sec max
AC Current (50/60Hz)	200 µA	0.1 µA	±(1.5% reading + 8 digits)
	2000 µA	1 µA
	20 mA	0.01 mA
	200 mA	0.1 mA
	2.000	0.001 A	±(3.0% reading + 5 digits)
	10 A	0.01 A	±(3.0% reading + 5 digits)
	Note: 10A for 30 sec max
Resistance	200 Ω	0.1 Ω	±(0.8% reading + 5 digits)
	2 kΩ	0.001 kΩ	±(0.8% reading + 2 digits)
	20 kΩ	0.01 kΩ
	200 kΩ	0.1 kΩ
	2 MΩ	0.001 MΩ	±(2.5% reading + 8 digits)
	20 MΩ	0.01 MΩ	±(2.5% reading + 8 digits)