Extech EX330 12 Function Mini MultiMeter + Non-Contact Voltage Detector

Item #:

EXT-EX330

Brand:

Extech

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us

Share this product:

Description

EX330 12 Function Mini MultiMeter + Non-Contact Voltage Detector by Extech

Features

0.5% basic accuracy
Built-in non-contact AC Voltage Detector with red LED indicator and audible beeper
Large 1" digits make it easy to read
Low battery indicator
Complete with stand, test leads, protective holster, batteries, general purpose bead wire temperature probe (Model EX330)
Autoranging
Data Hold: freeze the display
Auto Power Off: conserves battery life
Type K Temperature °F/°C switchable
Capacitance
Frequency
Relative function

Specifications

General Specifications

Diode Test	Test current: 0.3mA max., Open circuit voltage: 1.5V DC typ.
Continuity Check	Audible signal will sound if the resistance is less than 100 Ω
Temperature Sensor	Requires type K thermocouple
Input Impedance	10MΩ (VDC & VAC)
AC Bandwidth	50 / 60Hz
Display	4000 count (0 to 3999 digits) LCD
Overrange indication	For all functions "OL" is displayed (Note: For ACV measurements only, an audible beep will also sound)
Auto Power Off	After 15 minutes (approximately) of inactivity
Polarity	No indication for positive; Minus (-) sign for negative
Measurement Rate	2 times per second, nominal
Low Battery Indication	Battery symbol is displayed if battery voltage drops below operating voltage
Battery	Two (2) 1.5V 'AAA' batteries
Fuses	mA, µA ranges: 500mA/250V fast blow; 'A' range: 10A/250V fast blow
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Operating Humidity	<70% RH
Storage Humidity	<80% RH
Operating Altitude	7000ft. (2000meters) maximum.
Weight	9.17 oz (260g) (includes holster).
Size	5.8" x 2.9" x 1.6" (147 x 76 x 42mm) (includes holster)
Approvals	UL, CE
Safety	This meter is intended for indoor use and protected, against the users, by double insulation per EN61010-1 and IEC61010-1 2nd Edition (2001) to CAT II 1000V & CAT III 600V; Pollution Degree 2. The meter also meets UL 61010-1, Second Edition (2004), CAN/CSA C22.2 No. 61010-1, Second Edition (2004), and UL 61010B-2-031, First Edition (2003)
UL LISTED	The UL mark does not indicate that this product has been evaluated for the accuracy of its readings.

Range Specifications

Function	Range	Resolution	Accuracy
Non-contact AC Voltage detector	100 to 600VAC	Resolution & accuracy do not apply since the meter does not display the voltage in this mode. The lamp at the top of the meter's display flashes when voltage is sensed.
DC Voltage (V DC)	400mV	0.1mV	±(0.5% reading + 2 digits)
	4V	0.001V	±(1.0% reading + 2 digits)
	40V	0.01V
	400V	0.1V
	600V	1V	±(1.5% reading + 2 digits)
AC Voltage (V AC) (50 / 60Hz)	400mV	0.1mV	±(1.0% reading + 30 digits)
	4V	0.001V	±(1.5% reading + 3 digits)
	40V	0.01V
	400V	0.1V
	600V	1V	±(2.0% reading + 4 digits
DC Current (A DC)	400μA	0.1μA	±(1.0% reading + 3 digits)
	4000μA	1μA	±(1.5% reading + 3 digits)
	40mA	0.01mA
	400mA	0.1mA
	10A	0.01A	±(2.5% reading + 5 digits)
AC Current (A AC) (50 / 60Hz)	400μA	0.1μA	±(1.5% reading + 5 digits)
	4000μA	1μA	±(1.8% reading + 5 digits)
	40mA	0.01mA
	400mA	0.1mA
	10A	0.01A	±(3.0% reading + 7 digits)
Resistance	400Ω	0.1Ω	±(1.2% reading + 4 digits)
	4kΩ	1Ω	±(1.2% reading + 2 digits)
	40kΩ	0.01kΩ
	400kΩ	0.1kΩ
	4MΩ	0.001MΩ
	40MΩ	0.01MΩ	±(2.0% reading + 3 digits)
Capacitance	4nF	0.001nF	±(3.5% reading + 40 digits)
	40nF	0.01nF	±(3.5% reading + 40 digits)
	400nF	0.1nF	±(2.5% reading + 4 digits)
	4μF	0.001μF	±(3.5% reading + 4 digits)
	40μF	0.01μF	±(3.5% reading + 4 digits)
	200μF	0.1μF	±(3.5% reading + 10 digits)
Frequency	5.000Hz	0.001Hz	±(0.1% reading + 1 digits)
	50.00Hz	0.01Hz
	500.0 Hz	0.1Hz
	5.000kHz	0.001kHz
	50.00kHz	0.01kHz
	500.0kHz	0.001MHz
	5.00MHz	0.01MHz
	10.00MHz	0.01MHz
	Sensitivity: 0.8V rms min. @ 20% to 80% duty cycle and <100kHz; 5Vrms min @ 20% to 80% duty cycle and > 100kHz.
Duty Cycle	0.1 to 99.9%	0.1%	±(1.2% reading + 2 digits)
Duty Cycle	For duty cycle the pulse width range is 100µs - 100ms (Frequency: 5Hz to 150kHz)
Temp (type-K)	-4 to 1382°F	1°F	±(3.0% reading + 8 digits) (probe accuracy not included)
Temp (type-K)	-20 to 750°C	1°C	±(3.0% reading + 8 digits) (probe accuracy not included)