Test & Measurement Accessories

Protective Case for MR77 Moisture Meter

Fits the FLIR DM9x and IM75 series of digital multimeters and accessories.

Fits FLIR CM8x and CM7x series of clamp meters.

Fits your assorted test accessories.

TA50 Universal Magnetic Hanging Strap by FLIR

• Hang your meter on metal electrical cabinets—allowing you to focus on your testing.
• Magnetic strip designed for DM9x series multimeters or any meter that accepts a 1" (25 mm) strap.
• Durable nylon strap.
• Securely fastens to the meter with an integrated mounting tab.

TA55 Universal AC Current Line Splitter by FLIR

• Provides easy and safe measurements of current and voltage from two or three wire outlets.
• Plugging the power connector into the line splitter separates the hot/live conductor from the neutral (and ground) for accurate current measurement.
• Dual ranges (x1 and x10) for higher resolution on low-amperage readings.
• Built-in recessed voltage testing inputs.

TA60 Universal Thermocouple Probe with Adapter by FLIR

• Type K thermocouple temperature sensor.
• Can be used to measure temperature with many meters.
• Fast responding with a wide general-purpose measurement range.
• Safety-shrouded banana to banana connection.

TA70 Universal CAT IV Insulated Alligator Test Probe Clips by FLIR

• Works with FLIR TA80 test probes.
• Complies with latest UL CAT IV/CAT III—1000 V.
• Slide-on connection with finger guards.

TA80 Universal CAT IV Silicone Test Probes by FLIR

• 1000 Volt, 10 Amp test probes. UL certified to CAT IV—1000 V rating.
• Gold-plated tips for professional precision.
• Double-extruded multi-color silicone leads with wear indication.
• High-strength stress relief integrated into the probe.
• 41" lead length with a total length of 46" including the probe.

Replaceable Temp/RH Sensor for FLIR MR77

Replacement MR77 Pin Probe

MR04 Extension Pole by FLIR

The MR04 Extension Pole makes it easy to probe large and out-of-reach areas with a telescoping pole that extends up to 52".

• Rubberized ergonomic grips reduce slippage
• Compatible with MR05, MR06, and MR08
• Fits in MR08 shoulder case
• 1/4-20 thread

MR05 Impact Pin Moisture Probe for MR77 by FLIR

The FLIR MR05 upgrades your FLIR moisture meter to help you easily test for moisture in challenging spots - on rough or uneven surfaces, in corners, in hard woods or high-density materials, and even in areas without a dry reference. Made with extra-durable pins and a metallic impact plate that can withstand hammering to drive pins into the hardest materials, the FLIR MR05 lets you tackle the toughest moisture measurement challenges.

• Six additional sets of thick and thin pins
• An external pin accessory for extended reach
• 1/4"-20 integrated wrench on the cap to replace pins
• Durable BNC connector
• 2.45m (8') coiled cord
• 2 year warranty

FLIR Replacement Pins for MR77 (standard) 1.50~1.55 mm - includes (25) sets of pins

FLIR Replacement Pins for MR77 (wide) 2.26~2.35 mm - includes (25) sets of pins

MR06 Wall Cavity Probe for FLIR Moisture Meters by FLIR

The MR06 Wall Cavity Probe expands the functionality of your FLIR Moisture Meter by allowing you to easily measure insulation moisture levels within the wall cavity and the inside face of exterior walls.

• Insulated pins designed for increased durability
• Rubberized ergonomic grips reduce slippage
• Detachable cord with durable BNC connection
• 4" and 6" pins included
• Impact plate to drive pins through drywall

MR07 Hammer Probe with Shoulder Bag for FLIR Moisture Meters by FLIR

The MR07 Hammer Probe expands the functionality of your FLIR Moisture Meter by allowing you to take measurements in subfloor through carpet, hardwood flooring, and hard materials that are difficult to penetrate with a standard pin probe.

• Insulated pins designed for increased durability
• Rubberized ergonomic grips reduce slippage
• Detachable cord with durable BNC connection
• Pins Included: 2 x 2" pins

MR08 Hammer and Wall Cavity Probe Combo with Shoulder Bag for FLIR Moisture Meters by FLIR

The MR08 Hammer and Wall Cavity Probe Combo is ideal for both hammer probe and wall cavity applications. The hammer probe has an additional handle on the bottom to add convenience for angled, horizontal, and inverted hammer-probing needs. The bottom handle can be unscrewed and used as a wall cavity probe to measure the moisture level of insulation within the wall cavity and can also reach the inside face of the exterior wall. You can also install the impact plate for use with a hammer to punch the extended pins through drywall.

• Insulated pins designed for increased durability
• Rubberized ergonomic grips reduce slippage
• Detachable cord with durable BNC connection
• Pins Included: 2 × 2" pins, 2 × 4" pins, 2 × 6" pins
• Impact plate to drive pins through drywall

MR09 Baseboard Probe by FLIR

The MR09 Baseboard Probe is ideal for taking measurements in hard-to-reach areas. Probe behind baseboards, wall trim, and crown molding without requiring removal. Long, thin, flexible probes minimize needed space.

• Insulated blades designed for increased durability
• Rubberized ergonomic grips reduce slippage
• Detachable cord with durable BNC connection

FLIR RJ45 to BNC Cable for FLIR Moisture Meters and Accessories

MR-PINS2-10 2 Inch Pins for MR06, MR07 & MR08 - Includes (10) pairs by FLIR

FLIR's new insulated pins are smaller in diameter - requiring minimal force to drive the pins into a surface - resulting in less impact to the material. The sandblasted, hardened-steel pins with single-piece design prevent bending and create an improved bonding surface for the abrasion-resistant insulation. The insulation extends all the way to the connection to the probe, so even if you drive the pins all the way into the wall cavity, the drywall will not affect the measurement.

• Fits Hammer, Wall Cavity and Combo Probes
• Unibody construction vs. two piece
• Smaller diameter pins
• Sandblasted hardened steel
• Insulated with abrasion resistant coating

MR-PINS2 2 Inch Pins for MR06, MR07 & MR08 - Includes (1) pair by FLIR

FLIR's new insulated pins are smaller in diameter - requiring minimal force to drive the pins into a surface - resulting in less impact to the material. The sandblasted, hardened-steel pins with single-piece design prevent bending and create an improved bonding surface for the abrasion-resistant insulation. The insulation extends all the way to the connection to the probe, so even if you drive the pins all the way into the wall cavity, the drywall will not affect the measurement.

• Fits Hammer, Wall Cavity and Combo Probes
• Unibody construction vs. two piece
• Smaller diameter pins
• Sandblasted hardened steel
• Insulated with abrasion resistant coating

MR-PINS4 4 Inch Pins for MR06, MR07 & MR08 - Includes (1) pair by FLIR

FLIR's new insulated pins are smaller in diameter - requiring minimal force to drive the pins into a surface - resulting in less impact to the material. The sandblasted, hardened-steel pins with single-piece design prevent bending and create an improved bonding surface for the abrasion-resistant insulation. The insulation extends all the way to the connection to the probe, so even if you drive the pins all the way into the wall cavity, the drywall will not affect the measurement.

• Fits Hammer, Wall Cavity and Combo Probes
• Unibody construction vs. two piece
• Smaller diameter pins
• Sandblasted hardened steel
• Insulated with abrasion resistant coating

MR-PINS6 6 Inch Pins for MR06, MR07 & MR08 - Includes (1) pair by FLIR

FLIR's new insulated pins are smaller in diameter – requiring minimal force to drive the pins into a surface – resulting in less impact to the material. The sandblasted, hardened-steel pins with single-piece design prevent bending and create an improved bonding surface for the abrasion-resistant insulation. The insulation extends all the way to the connection to the probe, so even if you drive the pins all the way into the wall cavity, the drywall will not affect the measurement.

• Fits Hammer, Wall Cavity and Combo Probes
• Unibody construction vs. two piece
• Smaller diameter pins
• Sandblasted hardened steel
• Insulated with abrasion resistant coating

FLIR AAA Universal Rechargeable Battery Kit

FLIR Rechargeable Battery Kit for DM284

TA10-F Protective case for DM9x and TA72 / 74 or CM55 / 57 by FLIR

Made from durable EVA rubber, the TA10-F Protective Case shields against harsh environmental conditions and damage. Exclusively designed for use with the FLIR DM92/DM93 Industrial Digital Multimeters, the FLIR TA72/TA74 Universal Flex Current Probe Accessories, and the FLIR CM55/57 Flexible Clamp Meters with Bluetooth®.

• Form-fitting instrument compartment
• Concealed zipper resists dirt
• Resilient nylon carry strap
• Rugged, non-slip finish
• 1-year warranty

TA13 Protective Case for TG165 by FLIR

Safeguard your valuable FLIR T&M instruments with our durable EVA protective case. Stow your FLIR test and measurement gear in a FLIR durable EVA protective case to shield against dirt, dings, and harsh environmental conditions.

• Custom molded instrument compartment protects tools from extremes
• Concealed zipper designed for dirt resistance
• Resilient nylon carry strap
• Ruggedized rubber pattern non-slip finish
• 1 Year Warranty

TA14 Holster for TG165 by FLIR

For on the hip deployment and out of the way security while getting into position to measure, add TA14 to your TG165, Imaging IR Thermometer. The design is a combination of mobile device ease to use, durable design from power tool belt storage solutions and security inspired by a classic pistol holster.

• Belt clip holster for TG165, Imaging IR Thermometer
• Multi-position for convenience in positions
• Cell phone like over the belt clip snap hook
• Made in the USA
• Designed specifically for TG165
• Snap security strap
• Fits most belts
• 1 Year Warranty

TA15 Universal Soft Sided Case by FLIR

The FLIR TA15 is a universal, multi-compartment soft sided case designed to protect and carry your FLIR clamp meter, flex clamp accessory, test leads, or any other tool you need on the job. Recommended for use with any FLIR clamp meter and the FLIR Universal Flex Current Probe Accessory (TA72 or TA74).

• 2 large instrument compartments
• Removable hand strap
• Quick-release belt clip
• Convenient magnetic bag closure
• Label/luggage tag window
• 2 durable side pockets (mesh / neoprene)
• 1-year warranty

TA42 CM 7x Belt Clip by FLIR

Use your FLIR clamp meter while on-the-go with the sturdy TA42 Belt Clip. Designed for use with the FLIR CM174, CM74, and CM72 Clamp Meters, the low-profile clip securely attaches to the meter's tripod mount.

TA52 CM 7x Magnetic Meter Mount by FLIR

Securely mount your FLIR clamp meter to an electrical panel or other magnetic surface to have more convenience with test probe measurements. Designed for the FLIR CM174, CM74, and CM72 Clamp Meters, the low-profile TA52 firmly attaches to the meter’s tripod mount and stores easily.

TA72 Universal Flex Clamp Probe Accessory 10 in (25cm) by FLIR

The FLIR Universal Flex Current Probe accessories are designed to add capabilities, simplify challenges, and get the best readings with your existing meter. Made with a narrow flexible coil clamp and locking mechanism, the TA72 and TA74 let you easily take measurements in tight or awkward spots - a difficult task with a traditional hard jaw clamp meter. The connection is a standard banana plug and the output is a voltage signal, so it's compatible with most DMMs and clamp meters, regardless of brand.*

TAKE ACCURATE MEASUREMENTS IN TIGHT OR AWKWARD SPOTS

• Snake the coil around obstacles with ease, even in deep, crowded cabinets
• Measure multiple conductors and targets with limited clearance
• Switchable AC current range - 30A, 300A, 3000A

EMPOWER YOUR METER

• Adds 3000A AC current measurements to existing meters
• Standard banana plug connectors fit most meters
• AC voltage output for wide compatibility

EASY INSPECTION AND NAVIGATION

• Bright, dual LED worklights provide built-in illumination for dark cabinets
• Rugged design drop-tested to 3 meters, portable and lightweight
• Limited lifetime warranty with registration

TA74 Universal Flex Clamp Probe Accessory 18 in (45cm) by FLIR

The FLIR Universal Flex Current Probe accessories are designed to add capabilities, simplify challenges, and get the best readings with your existing meter. Made with a narrow flexible coil clamp and locking mechanism, the TA72 and TA74 let you easily take measurements in tight or awkward spots - a difficult task with a traditional hard jaw clamp meter. The connection is a standard banana plug and the output is a voltage signal, so it's compatible with most DMMs and clamp meters, regardless of brand.*

TAKE ACCURATE MEASUREMENTS IN TIGHT OR AWKWARD SPOTS

• Snake the coil around obstacles with ease, even in deep, crowded cabinets
• Measure multiple conductors and targets with limited clearance
• Switchable AC current range - 30A, 300A, 3000A

EMPOWER YOUR METER

• Adds 3000A AC current measurements to existing meters
• Standard banana plug connectors fit most meters
• AC voltage output for wide compatibility

EASY INSPECTION AND NAVIGATION

• Bright, dual LED worklights provide built-in illumination for dark cabinets
• Rugged design drop-tested to 3 meters, portable and lightweight
• Limited lifetime warranty with registration

Temperature and Humidity Sensor with Extension Assembly

Protective Case for FLIR Moisture Meters

MR11 Temp and Humidity External Probe by FLIR

The FLIR MR11 is an ergonomic temperature and humidity sensor designed for use with the FLIR MR176 and FLIR MR77 moisture meters. Save time by deploying MR11 sensors in each dehumidifier, instead of moving one sensor to various locations and waiting for it to acclimate.

MR12 Ball Probe Moisture Meter Accessory by FLIR

The FLIR MR12 is a ball-shaped moisture sensor accessory designed to extend the measurement range of the FLIR MR176, MR160, and MR60 moisture meters. Cover a large area in a short time without making a mark, and measure into corners and around baseboards easily. When there's no clear presence of moisture, the MR12's ball probe can help you detect moisture below the surface, and determine the moisture migration path from the source.

Replacement Temperature and Relative Humidity Sensor

Universal Power Supply USB to Micro - compatible with TG1xx, MR60, MR160 and MR176

Replacement Test Leads for VT8-600 and VT8-1000