1-866-4 JJSTECH(1-866-455-7832)

Fieldpiece Job Link System Power Swivel Clamp Meter with 1000VDC - SC680

Item #:
FP-SC680
Brand:
Fieldpiece
Fieldpiece Job Link System Power Swivel Clamp Meter with 1000VDC - SC680
$425.00
Qty
Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
Fieldpiece Job Link System Power Swivel Clamp Meter with 1000VDC - SC680

Fieldpiece Job Link System Power Swivel Clamp Meter with 1000VDC - SC680

$425.00

SC680 Job Link System Power Swivel Clamp Meter with 1000VDC by Fieldpiece

Whether you're working on small circuitry in mini-splits or on large commercial units, the new SC480 and SC680 are packed with everything you need to install, service, and troubleshoot any HVACR system.

  • Measures Power (kW)
  • Use on variable frequency drives (VFDs)
  • True RMS & Low Pass Filter for VAC/Hz
  • Test Diodes and Resistance up to 50MΩ
  • Molex tip leads for small power connectors
  • DC Amps, Dual Temp, Swivel Clamp, Lead Storage (SC680)

Direct Integration with Job Link® System App!

Pair all your Job Link tools in the Job Link App to receive and document a complete system snapshot wirelessly. From the new SC480 and SC680 clamp meters and SM380V and SM480V manifolds, to the JL3 Job Link Probes, and SRS3 scale all measurements are live and in real time so you can see exactly how adjustments are affecting the system.

Document all measurements

Clearly communicate the health of the system with your co-workers and customers. Proven to help reduce call backs and increase sales.

  • Wireless Bluetooth Beacon
  • 115' (35 meters) wireless connection direct to mobile device
  • Document electrical measurements
  • Calculate power and system efficiency
  • Measure accurate blower amperages behind the door
  • Wireless monitoring of compressor VAC and AAC

Top-of-the-Line HVACR Meters

Not only do these meters communicate with Job Link, but you can also measure power consumption (kW) to determine system efficiency. Verify 3-phase rotation with just two leads. Take more accurate VAC and AAC readings with True RMS. Filter out noise to get true voltage and frequency with low pass filter.

  • Measures Power (kW) for system efficiency
  • Has True RMS and Low Pass Filter (LPF) to obtain accurate VFD readings
  • Indicates 3-phase rotation with two leads
  • Measures start/run capacitors
  • Molex tips reach into power connectors
  • Magnet for mounting meter during use
  • Safety rated CAT IV-600V/CAT III-1000V

SC680

  • DC Amps and Diode for mini-split inverters
  • Dual temperature for delta T
  • Swivel clamp to view readings at any angle
  • Test lead storage
  • Backlit dial
Display 10000 count dual display
Backlight 5 minute duration with auto-off, blue color
Overrange "OL" or "-OL" is displayed
Measurement rate 3.3 times per second, nominal
Zero Automatic
Operating environment 32°F to 122°F (0°C to 50°C) at <70%RH
Storage temperature -4°F to 140°F (-20°C to 60°C), 0 to 80%RH (with battery removed)
Accuracy Stated accuracy @ 73°F±9°F (23°C±5°C), <75%RH
Temperature coefficient 0.1 x (specified accuracy) per °C [0°C to 19°C (32°F to 66°F), 28°C to 50° C (82°F to 122°F)]
APO (Auto Power Off) Approx. 30 minutes
Power Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22
Battery life 100 hours typical alkaline (No wireless, no backlight)
Low battery indication Battery icon blinks and "batt" is displayed when the battery voltage drops below the operating level
Dimensions 301.5mm(H) x 79.5mm(W) x 50.0mm(D)
Weight Approx. 480g including battery
Altitude Up to 6562 ft (2000m)
Overload protection 1000VDC or 750VAC rms unless otherwise stated
Test leads Use UL listed test leads that comply to UL61010-031 rated CATIV 600V, CATIII 1000V or above. Included test leads are gold-plated and have removable safety caps.

Questions & Answers


There are no questions or answers for this item.