1-866-4 JJSTECH(1-866-455-7832)

  1. Home
  2. Single-Gas Monitors
  3. G600 Series Single-gas Detectors
  4. G624P Single-Gas Detectors

G624P Single-Gas Detectors

Results: 1-18 of 18
Filter by Category
Items per page:
Sort by:
  1. GfG G624P Hydrogen Single-Gas Detector (without latching alarm) - 1624-014QUICK VIEW

    GfG G624P Hydrogen Single-Gas Detector (without latching alarm) - 1624-014

    Brand: GfG | Item #: 1624-014

    Discontinued
  2. GfG G624P Hydrogen Single-Gas Detector (with latching alarm) - 1624-064QUICK VIEW

    GfG G624P Hydrogen Single-Gas Detector (with latching alarm) - 1624-064

    Brand: GfG | Item #: 1624-064

    Discontinued
  3. GfG G624P Hydrogen Single-Gas Detector (without latching alarm) - 1624-003QUICK VIEW

    GfG G624P Hydrogen Single-Gas Detector (without latching alarm) - 1624-003

    Brand: GfG | Item #: 1624-003

    Discontinued
  4. GfG G624P Hydrogen Single-Gas Detector (with latching alarm) - 1624-053QUICK VIEW

    GfG G624P Hydrogen Single-Gas Detector (with latching alarm) - 1624-053

    Brand: GfG | Item #: 1624-053

    Discontinued
  5. GfG G624P Methane Single-Gas Detector (without latching alarm) - 1624-002QUICK VIEW

    GfG G624P Methane Single-Gas Detector (without latching alarm) - 1624-002

    Brand: GfG | Item #: 1624-002

    Discontinued
  6. GfG G624P Methane Single-Gas Detector (with latching alarm) - 1624-052QUICK VIEW

    GfG G624P Methane Single-Gas Detector (with latching alarm) - 1624-052

    Brand: GfG | Item #: 1624-052

    Discontinued
  7. GfG G624P Methane Single Gas Detector (without latching alarm) - 1624-004QUICK VIEW

    GfG G624P Methane Single Gas Detector (without latching alarm) - 1624-004

    Brand: GfG | Item #: 1624-004

    Discontinued
  8. GfG G624P Methane Single Gas Detector (with latching alarm) - 1624-054QUICK VIEW

    GfG G624P Methane Single Gas Detector (with latching alarm) - 1624-054

    Brand: GfG | Item #: 1624-054

    Discontinued
  9. GfG G624P Special Calibration Single Gas Detector (without latching alarm) - 1624-015QUICK VIEW

    GfG G624P Special Calibration Single Gas Detector (without latching alarm) - 1624-015

    Brand: GfG | Item #: 1624-015

    Discontinued
  10. GfG G624P Special Calibration Single Gas Detector (with latching alarm) - 1624-065QUICK VIEW

    GfG G624P Special Calibration Single Gas Detector (with latching alarm) - 1624-065

    Brand: GfG | Item #: 1624-065

    Discontinued
  11. GfG G634P Hydrogen Single Gas Detector (without latching alarm) - 1634-003QUICK VIEW

    GfG G634P Hydrogen Single Gas Detector (without latching alarm) - 1634-003

    Brand: GfG | Item #: 1634-003

    Discontinued
  12. GfG G634P Hydrogen Single Gas Detector (with latching alarm) - 1634-053QUICK VIEW

    GfG G634P Hydrogen Single Gas Detector (with latching alarm) - 1634-053

    Brand: GfG | Item #: 1634-053

    Discontinued
  13. GfG G634P Methane Single Gas Detector (without latching alarm) - 1634-002QUICK VIEW

    GfG G634P Methane Single Gas Detector (without latching alarm) - 1634-002

    Brand: GfG | Item #: 1634-002

    Discontinued
  14. GfG G634P Methane Single Gas Detector (with latching alarm) - 1634-052QUICK VIEW

    GfG G634P Methane Single Gas Detector (with latching alarm) - 1634-052

    Brand: GfG | Item #: 1634-052

    Discontinued
  15. GfG G634P Methane Single Gas Detector (without latching alarm) - 1634-004QUICK VIEW

    GfG G634P Methane Single Gas Detector (without latching alarm) - 1634-004

    Brand: GfG | Item #: 1634-004

    Discontinued
  16. GfG G634P Methane Single Gas Detector (with latching alarm) - 1634-054QUICK VIEW

    GfG G634P Methane Single Gas Detector (with latching alarm) - 1634-054

    Brand: GfG | Item #: 1634-054

    Discontinued
  17. GfG G634P Special Calibration Single Gas Detector (without latching alarm) - 1634-001QUICK VIEW

    GfG G634P Special Calibration Single Gas Detector (without latching alarm) - 1634-001

    Brand: GfG | Item #: 1634-001

    Discontinued
  18. GfG G634P Special Calibration Single Gas Detector (with latching alarm) - 1634-051QUICK VIEW

    GfG G634P Special Calibration Single Gas Detector (with latching alarm) - 1634-051

    Brand: GfG | Item #: 1634-051

    Discontinued
GfG G624P Hydrogen Single-Gas Detector (without latching alarm) - 1624-014
View Product Details >

GfG G624P Hydrogen Single-Gas Detector (without latching alarm) - 1624-014




Item #1624-014
BrandGfG
Price: $1,050.00
Quantity:
Discontinued

1624-014 G624P Hydrogen Single-Gas Detector (without latching alarm) by GfG

Versatile Combustible Gas Detection

An explosive environment is created when combustible gases or vapors reach levels that are between the lower explosion limit (LEL) and the upper explosion limit (UEL). Methane, for example, has a LEL of 5% volume and UEL of 15% volume. These levels differ depending on which combustible gas is present.

The G600 series audible and visual alarms will be triggered long before an airgas mixture has reached a dangerous concentration. The alarm threshold is usually set to 10% LEL, if not otherwise specified. The measurement principle for combustible gases and vapors in the percent LEL range is detected with a stable catalytic combustion sensor.

Various models of the G600 series use an additional detection principle on the basis of a thermal conductivity sensor. Using this system, combustible gases can be measured in concentrations up to 100% volume. Other models are available with additional ppm or micro range readings. With its internal sampling pump, extremely small amounts of gas can easily be detected from leaks in pipelines, valves and fittings.

G634P

The G634P model is ideal for measuring, detecting and warning of leak warning for combustible gases and vapors.

Features

  • Gas supply companies
  • Chemical industry
  • Laboratories
  • Storage tanks
  • Landfills
  • Solvent working companies
  • Fire departments
  • Civil and underground engineering

…and wherever life and/or property needs to be protected against hazardous combustible gases or vapors.

As the G600 thermal conductivity system shows only a minimal interference by carbon dixide (CO2), this instrument is suitable for direct landfill measurements without filters. The EXOTECTOR’s functional features make it a high performance, reliable gas detector.

GfG G624P Hydrogen Single-Gas Detector (with latching alarm) - 1624-064
View Product Details >

GfG G624P Hydrogen Single-Gas Detector (with latching alarm) - 1624-064




Item #1624-064
BrandGfG
Price: $1,105.00
Quantity:
Discontinued

1624-064 G624P Hydrogen Single-Gas Detector (with latching alarm) by GfG

Versatile Combustible Gas Detection

An explosive environment is created when combustible gases or vapors reach levels that are between the lower explosion limit (LEL) and the upper explosion limit (UEL). Methane, for example, has a LEL of 5% volume and UEL of 15% volume. These levels differ depending on which combustible gas is present.

The G600 series audible and visual alarms will be triggered long before an airgas mixture has reached a dangerous concentration. The alarm threshold is usually set to 10% LEL, if not otherwise specified. The measurement principle for combustible gases and vapors in the percent LEL range is detected with a stable catalytic combustion sensor.

Various models of the G600 series use an additional detection principle on the basis of a thermal conductivity sensor. Using this system, combustible gases can be measured in concentrations up to 100% volume. Other models are available with additional ppm or micro range readings. With its internal sampling pump, extremely small amounts of gas can easily be detected from leaks in pipelines, valves and fittings.

G634P

The G634P model is ideal for measuring, detecting and warning of leak warning for combustible gases and vapors.

Features

  • Gas supply companies
  • Chemical industry
  • Laboratories
  • Storage tanks
  • Landfills
  • Solvent working companies
  • Fire departments
  • Civil and underground engineering

…and wherever life and/or property needs to be protected against hazardous combustible gases or vapors.

As the G600 thermal conductivity system shows only a minimal interference by carbon dixide (CO2), this instrument is suitable for direct landfill measurements without filters. The EXOTECTOR’s functional features make it a high performance, reliable gas detector.

GfG G624P Hydrogen Single-Gas Detector (without latching alarm) - 1624-003
View Product Details >

GfG G624P Hydrogen Single-Gas Detector (without latching alarm) - 1624-003




Item #1624-003
BrandGfG
Price: $1,050.00
Quantity:
Discontinued

1624-003 G624P Hydrogen Single-Gas Detector (without latching alarm) by GfG

Versatile Combustible Gas Detection

An explosive environment is created when combustible gases or vapors reach levels that are between the lower explosion limit (LEL) and the upper explosion limit (UEL). Methane, for example, has a LEL of 5% volume and UEL of 15% volume. These levels differ depending on which combustible gas is present.

The G600 series audible and visual alarms will be triggered long before an airgas mixture has reached a dangerous concentration. The alarm threshold is usually set to 10% LEL, if not otherwise specified. The measurement principle for combustible gases and vapors in the percent LEL range is detected with a stable catalytic combustion sensor.

Various models of the G600 series use an additional detection principle on the basis of a thermal conductivity sensor. Using this system, combustible gases can be measured in concentrations up to 100% volume. Other models are available with additional ppm or micro range readings. With its internal sampling pump, extremely small amounts of gas can easily be detected from leaks in pipelines, valves and fittings.

G634P

The G634P model is ideal for measuring, detecting and warning of leak warning for combustible gases and vapors.

Features

  • Gas supply companies
  • Chemical industry
  • Laboratories
  • Storage tanks
  • Landfills
  • Solvent working companies
  • Fire departments
  • Civil and underground engineering

…and wherever life and/or property needs to be protected against hazardous combustible gases or vapors.

As the G600 thermal conductivity system shows only a minimal interference by carbon dixide (CO2), this instrument is suitable for direct landfill measurements without filters. The EXOTECTOR’s functional features make it a high performance, reliable gas detector.

GfG G624P Hydrogen Single-Gas Detector (with latching alarm) - 1624-053
View Product Details >

GfG G624P Hydrogen Single-Gas Detector (with latching alarm) - 1624-053




Item #1624-053
BrandGfG
Price: $1,105.00
Quantity:
Discontinued

1624-053 G624P Hydrogen Single-Gas Detector (with latching alarm) by GfG

Versatile Combustible Gas Detection

An explosive environment is created when combustible gases or vapors reach levels that are between the lower explosion limit (LEL) and the upper explosion limit (UEL). Methane, for example, has a LEL of 5% volume and UEL of 15% volume. These levels differ depending on which combustible gas is present.

The G600 series audible and visual alarms will be triggered long before an airgas mixture has reached a dangerous concentration. The alarm threshold is usually set to 10% LEL, if not otherwise specified. The measurement principle for combustible gases and vapors in the percent LEL range is detected with a stable catalytic combustion sensor.

Various models of the G600 series use an additional detection principle on the basis of a thermal conductivity sensor. Using this system, combustible gases can be measured in concentrations up to 100% volume. Other models are available with additional ppm or micro range readings. With its internal sampling pump, extremely small amounts of gas can easily be detected from leaks in pipelines, valves and fittings.

G634P

The G634P model is ideal for measuring, detecting and warning of leak warning for combustible gases and vapors.

Features

  • Gas supply companies
  • Chemical industry
  • Laboratories
  • Storage tanks
  • Landfills
  • Solvent working companies
  • Fire departments
  • Civil and underground engineering

…and wherever life and/or property needs to be protected against hazardous combustible gases or vapors.

As the G600 thermal conductivity system shows only a minimal interference by carbon dixide (CO2), this instrument is suitable for direct landfill measurements without filters. The EXOTECTOR’s functional features make it a high performance, reliable gas detector.

GfG G624P Methane Single-Gas Detector (without latching alarm) - 1624-002
View Product Details >

GfG G624P Methane Single-Gas Detector (without latching alarm) - 1624-002




Item #1624-002
BrandGfG
Price: $1,050.00
Quantity:
Discontinued

1624-002 G624P Methane Single-Gas Detector (without latching alarm) by GfG

Versatile Combustible Gas Detection

An explosive environment is created when combustible gases or vapors reach levels that are between the lower explosion limit (LEL) and the upper explosion limit (UEL). Methane, for example, has a LEL of 5% volume and UEL of 15% volume. These levels differ depending on which combustible gas is present.

The G600 series audible and visual alarms will be triggered long before an airgas mixture has reached a dangerous concentration. The alarm threshold is usually set to 10% LEL, if not otherwise specified. The measurement principle for combustible gases and vapors in the percent LEL range is detected with a stable catalytic combustion sensor.

Various models of the G600 series use an additional detection principle on the basis of a thermal conductivity sensor. Using this system, combustible gases can be measured in concentrations up to 100% volume. Other models are available with additional ppm or micro range readings. With its internal sampling pump, extremely small amounts of gas can easily be detected from leaks in pipelines, valves and fittings.

G634P

The G634P model is ideal for measuring, detecting and warning of leak warning for combustible gases and vapors.

Features

  • Gas supply companies
  • Chemical industry
  • Laboratories
  • Storage tanks
  • Landfills
  • Solvent working companies
  • Fire departments
  • Civil and underground engineering

…and wherever life and/or property needs to be protected against hazardous combustible gases or vapors.

As the G600 thermal conductivity system shows only a minimal interference by carbon dixide (CO2), this instrument is suitable for direct landfill measurements without filters. The EXOTECTOR’s functional features make it a high performance, reliable gas detector.

GfG G624P Methane Single-Gas Detector (with latching alarm) - 1624-052
View Product Details >

GfG G624P Methane Single-Gas Detector (with latching alarm) - 1624-052




Item #1624-052
BrandGfG
Price: $1,105.00
Quantity:
Discontinued

1624-052 G624P Methane Single-Gas Detector (with latching alarm) by GfG

Versatile Combustible Gas Detection

An explosive environment is created when combustible gases or vapors reach levels that are between the lower explosion limit (LEL) and the upper explosion limit (UEL). Methane, for example, has a LEL of 5% volume and UEL of 15% volume. These levels differ depending on which combustible gas is present.

The G600 series audible and visual alarms will be triggered long before an airgas mixture has reached a dangerous concentration. The alarm threshold is usually set to 10% LEL, if not otherwise specified. The measurement principle for combustible gases and vapors in the percent LEL range is detected with a stable catalytic combustion sensor.

Various models of the G600 series use an additional detection principle on the basis of a thermal conductivity sensor. Using this system, combustible gases can be measured in concentrations up to 100% volume. Other models are available with additional ppm or micro range readings. With its internal sampling pump, extremely small amounts of gas can easily be detected from leaks in pipelines, valves and fittings.

G634P

The G634P model is ideal for measuring, detecting and warning of leak warning for combustible gases and vapors.

Features

  • Gas supply companies
  • Chemical industry
  • Laboratories
  • Storage tanks
  • Landfills
  • Solvent working companies
  • Fire departments
  • Civil and underground engineering

…and wherever life and/or property needs to be protected against hazardous combustible gases or vapors.

As the G600 thermal conductivity system shows only a minimal interference by carbon dixide (CO2), this instrument is suitable for direct landfill measurements without filters. The EXOTECTOR’s functional features make it a high performance, reliable gas detector.

GfG G624P Methane Single Gas Detector (without latching alarm) - 1624-004
View Product Details >

GfG G624P Methane Single Gas Detector (without latching alarm) - 1624-004




Item #1624-004
BrandGfG
Price: $1,050.00
Quantity:
Discontinued

1624-004 G624P Methane Single Gas Detector (without latching alarm) by GfG

Versatile Combustible Gas Detection

An explosive environment is created when combustible gases or vapors reach levels that are between the lower explosion limit (LEL) and the upper explosion limit (UEL). Methane, for example, has a LEL of 5% volume and UEL of 15% volume. These levels differ depending on which combustible gas is present.

The G600 series audible and visual alarms will be triggered long before an airgas mixture has reached a dangerous concentration. The alarm threshold is usually set to 10% LEL, if not otherwise specified. The measurement principle for combustible gases and vapors in the percent LEL range is detected with a stable catalytic combustion sensor.

Various models of the G600 series use an additional detection principle on the basis of a thermal conductivity sensor. Using this system, combustible gases can be measured in concentrations up to 100% volume. Other models are available with additional ppm or micro range readings. With its internal sampling pump, extremely small amounts of gas can easily be detected from leaks in pipelines, valves and fittings.

G634P

The G634P model is ideal for measuring, detecting and warning of leak warning for combustible gases and vapors.

Features

  • Gas supply companies
  • Chemical industry
  • Laboratories
  • Storage tanks
  • Landfills
  • Solvent working companies
  • Fire departments
  • Civil and underground engineering

…and wherever life and/or property needs to be protected against hazardous combustible gases or vapors.

As the G600 thermal conductivity system shows only a minimal interference by carbon dixide (CO2), this instrument is suitable for direct landfill measurements without filters. The EXOTECTOR’s functional features make it a high performance, reliable gas detector.

GfG G624P Methane Single Gas Detector (with latching alarm) - 1624-054
View Product Details >

GfG G624P Methane Single Gas Detector (with latching alarm) - 1624-054




Item #1624-054
BrandGfG
Price: $1,105.00
Quantity:
Discontinued

1624-054 G624P Methane Single Gas Detector (with latching alarm) by GfG

Versatile Combustible Gas Detection

An explosive environment is created when combustible gases or vapors reach levels that are between the lower explosion limit (LEL) and the upper explosion limit (UEL). Methane, for example, has a LEL of 5% volume and UEL of 15% volume. These levels differ depending on which combustible gas is present.

The G600 series audible and visual alarms will be triggered long before an airgas mixture has reached a dangerous concentration. The alarm threshold is usually set to 10% LEL, if not otherwise specified. The measurement principle for combustible gases and vapors in the percent LEL range is detected with a stable catalytic combustion sensor.

Various models of the G600 series use an additional detection principle on the basis of a thermal conductivity sensor. Using this system, combustible gases can be measured in concentrations up to 100% volume. Other models are available with additional ppm or micro range readings. With its internal sampling pump, extremely small amounts of gas can easily be detected from leaks in pipelines, valves and fittings.

G634P

The G634P model is ideal for measuring, detecting and warning of leak warning for combustible gases and vapors.

Features

  • Gas supply companies
  • Chemical industry
  • Laboratories
  • Storage tanks
  • Landfills
  • Solvent working companies
  • Fire departments
  • Civil and underground engineering

…and wherever life and/or property needs to be protected against hazardous combustible gases or vapors.

As the G600 thermal conductivity system shows only a minimal interference by carbon dixide (CO2), this instrument is suitable for direct landfill measurements without filters. The EXOTECTOR’s functional features make it a high performance, reliable gas detector.

GfG G624P Special Calibration Single Gas Detector (without latching alarm) - 1624-015
View Product Details >

GfG G624P Special Calibration Single Gas Detector (without latching alarm) - 1624-015




Item #1624-015
BrandGfG
Price: $1,055.00
Quantity:
Discontinued

1624-015 G624P Special Calibration Single Gas Detector (without latching alarm) by GfG

Versatile Combustible Gas Detection

An explosive environment is created when combustible gases or vapors reach levels that are between the lower explosion limit (LEL) and the upper explosion limit (UEL). Methane, for example, has a LEL of 5% volume and UEL of 15% volume. These levels differ depending on which combustible gas is present.

The G600 series audible and visual alarms will be triggered long before an airgas mixture has reached a dangerous concentration. The alarm threshold is usually set to 10% LEL, if not otherwise specified. The measurement principle for combustible gases and vapors in the percent LEL range is detected with a stable catalytic combustion sensor.

Various models of the G600 series use an additional detection principle on the basis of a thermal conductivity sensor. Using this system, combustible gases can be measured in concentrations up to 100% volume. Other models are available with additional ppm or micro range readings. With its internal sampling pump, extremely small amounts of gas can easily be detected from leaks in pipelines, valves and fittings.

G634P

The G634P model is ideal for measuring, detecting and warning of leak warning for combustible gases and vapors.

Features

  • Gas supply companies
  • Chemical industry
  • Laboratories
  • Storage tanks
  • Landfills
  • Solvent working companies
  • Fire departments
  • Civil and underground engineering

…and wherever life and/or property needs to be protected against hazardous combustible gases or vapors.

As the G600 thermal conductivity system shows only a minimal interference by carbon dixide (CO2), this instrument is suitable for direct landfill measurements without filters. The EXOTECTOR’s functional features make it a high performance, reliable gas detector.

GfG G624P Special Calibration Single Gas Detector (with latching alarm) - 1624-065
View Product Details >

GfG G624P Special Calibration Single Gas Detector (with latching alarm) - 1624-065




Item #1624-065
BrandGfG
Price: $1,215.00
Quantity:
Discontinued

1624-065 G624P Special Calibration Single Gas Detector (with latching alarm) by GfG

Versatile Combustible Gas Detection

An explosive environment is created when combustible gases or vapors reach levels that are between the lower explosion limit (LEL) and the upper explosion limit (UEL). Methane, for example, has a LEL of 5% volume and UEL of 15% volume. These levels differ depending on which combustible gas is present.

The G600 series audible and visual alarms will be triggered long before an airgas mixture has reached a dangerous concentration. The alarm threshold is usually set to 10% LEL, if not otherwise specified. The measurement principle for combustible gases and vapors in the percent LEL range is detected with a stable catalytic combustion sensor.

Various models of the G600 series use an additional detection principle on the basis of a thermal conductivity sensor. Using this system, combustible gases can be measured in concentrations up to 100% volume. Other models are available with additional ppm or micro range readings. With its internal sampling pump, extremely small amounts of gas can easily be detected from leaks in pipelines, valves and fittings.

G634P

The G634P model is ideal for measuring, detecting and warning of leak warning for combustible gases and vapors.

Features

  • Gas supply companies
  • Chemical industry
  • Laboratories
  • Storage tanks
  • Landfills
  • Solvent working companies
  • Fire departments
  • Civil and underground engineering

…and wherever life and/or property needs to be protected against hazardous combustible gases or vapors.

As the G600 thermal conductivity system shows only a minimal interference by carbon dixide (CO2), this instrument is suitable for direct landfill measurements without filters. The EXOTECTOR’s functional features make it a high performance, reliable gas detector.

GfG G634P Hydrogen Single Gas Detector (without latching alarm) - 1634-003
View Product Details >

GfG G634P Hydrogen Single Gas Detector (without latching alarm) - 1634-003




Item #1634-003
BrandGfG
Price: $1,320.00
Quantity:
Discontinued

1634-003 G634P Hydrogen Single Gas Detector (without latching alarm) by GfG

Versatile Combustible Gas Detection

An explosive environment is created when combustible gases or vapors reach levels that are between the lower explosion limit (LEL) and the upper explosion limit (UEL). Methane, for example, has a LEL of 5% volume and UEL of 15% volume. These levels differ depending on which combustible gas is present.

The G600 series audible and visual alarms will be triggered long before an airgas mixture has reached a dangerous concentration. The alarm threshold is usually set to 10% LEL, if not otherwise specified. The measurement principle for combustible gases and vapors in the percent LEL range is detected with a stable catalytic combustion sensor.

Various models of the G600 series use an additional detection principle on the basis of a thermal conductivity sensor. Using this system, combustible gases can be measured in concentrations up to 100% volume. Other models are available with additional ppm or micro range readings. With its internal sampling pump, extremely small amounts of gas can easily be detected from leaks in pipelines, valves and fittings.

G634P

The G634P model is ideal for measuring, detecting and warning of leak warning for combustible gases and vapors.

Features

  • Gas supply companies
  • Chemical industry
  • Laboratories
  • Storage tanks
  • Landfills
  • Solvent working companies
  • Fire departments
  • Civil and underground engineering

…and wherever life and/or property needs to be protected against hazardous combustible gases or vapors.

As the G600 thermal conductivity system shows only a minimal interference by carbon dixide (CO2), this instrument is suitable for direct landfill measurements without filters. The EXOTECTOR’s functional features make it a high performance, reliable gas detector.

GfG G634P Hydrogen Single Gas Detector (with latching alarm) - 1634-053
View Product Details >

GfG G634P Hydrogen Single Gas Detector (with latching alarm) - 1634-053




Item #1634-053
BrandGfG
Price: $1,430.00
Quantity:
Discontinued

1634-053 G634P Hydrogen Single Gas Detector (with latching alarm) by GfG

Versatile Combustible Gas Detection

An explosive environment is created when combustible gases or vapors reach levels that are between the lower explosion limit (LEL) and the upper explosion limit (UEL). Methane, for example, has a LEL of 5% volume and UEL of 15% volume. These levels differ depending on which combustible gas is present.

The G600 series audible and visual alarms will be triggered long before an airgas mixture has reached a dangerous concentration. The alarm threshold is usually set to 10% LEL, if not otherwise specified. The measurement principle for combustible gases and vapors in the percent LEL range is detected with a stable catalytic combustion sensor.

Various models of the G600 series use an additional detection principle on the basis of a thermal conductivity sensor. Using this system, combustible gases can be measured in concentrations up to 100% volume. Other models are available with additional ppm or micro range readings. With its internal sampling pump, extremely small amounts of gas can easily be detected from leaks in pipelines, valves and fittings.

G634P

The G634P model is ideal for measuring, detecting and warning of leak warning for combustible gases and vapors.

Features

  • Gas supply companies
  • Chemical industry
  • Laboratories
  • Storage tanks
  • Landfills
  • Solvent working companies
  • Fire departments
  • Civil and underground engineering

…and wherever life and/or property needs to be protected against hazardous combustible gases or vapors.

As the G600 thermal conductivity system shows only a minimal interference by carbon dixide (CO2), this instrument is suitable for direct landfill measurements without filters. The EXOTECTOR’s functional features make it a high performance, reliable gas detector.

GfG G634P Methane Single Gas Detector (without latching alarm) - 1634-002
View Product Details >

GfG G634P Methane Single Gas Detector (without latching alarm) - 1634-002




Item #1634-002
BrandGfG
Price: $1,320.00
Quantity:
Discontinued

1634-002 G634P Methane Single Gas Detector (without latching alarm) by GfG

Versatile Combustible Gas Detection

An explosive environment is created when combustible gases or vapors reach levels that are between the lower explosion limit (LEL) and the upper explosion limit (UEL). Methane, for example, has a LEL of 5% volume and UEL of 15% volume. These levels differ depending on which combustible gas is present.

The G600 series audible and visual alarms will be triggered long before an airgas mixture has reached a dangerous concentration. The alarm threshold is usually set to 10% LEL, if not otherwise specified. The measurement principle for combustible gases and vapors in the percent LEL range is detected with a stable catalytic combustion sensor.

Various models of the G600 series use an additional detection principle on the basis of a thermal conductivity sensor. Using this system, combustible gases can be measured in concentrations up to 100% volume. Other models are available with additional ppm or micro range readings. With its internal sampling pump, extremely small amounts of gas can easily be detected from leaks in pipelines, valves and fittings.

G634P

The G634P model is ideal for measuring, detecting and warning of leak warning for combustible gases and vapors.

Features

  • Gas supply companies
  • Chemical industry
  • Laboratories
  • Storage tanks
  • Landfills
  • Solvent working companies
  • Fire departments
  • Civil and underground engineering

…and wherever life and/or property needs to be protected against hazardous combustible gases or vapors.

As the G600 thermal conductivity system shows only a minimal interference by carbon dixide (CO2), this instrument is suitable for direct landfill measurements without filters. The EXOTECTOR’s functional features make it a high performance, reliable gas detector.

GfG G634P Methane Single Gas Detector (with latching alarm) - 1634-052
View Product Details >

GfG G634P Methane Single Gas Detector (with latching alarm) - 1634-052




Item #1634-052
BrandGfG
Price: $1,430.00
Quantity:
Discontinued

1634-052 G634P Methane Single Gas Detector (with latching alarm) by GfG

Versatile Combustible Gas Detection

An explosive environment is created when combustible gases or vapors reach levels that are between the lower explosion limit (LEL) and the upper explosion limit (UEL). Methane, for example, has a LEL of 5% volume and UEL of 15% volume. These levels differ depending on which combustible gas is present.

The G600 series audible and visual alarms will be triggered long before an airgas mixture has reached a dangerous concentration. The alarm threshold is usually set to 10% LEL, if not otherwise specified. The measurement principle for combustible gases and vapors in the percent LEL range is detected with a stable catalytic combustion sensor.

Various models of the G600 series use an additional detection principle on the basis of a thermal conductivity sensor. Using this system, combustible gases can be measured in concentrations up to 100% volume. Other models are available with additional ppm or micro range readings. With its internal sampling pump, extremely small amounts of gas can easily be detected from leaks in pipelines, valves and fittings.

G634P

The G634P model is ideal for measuring, detecting and warning of leak warning for combustible gases and vapors.

Features

  • Gas supply companies
  • Chemical industry
  • Laboratories
  • Storage tanks
  • Landfills
  • Solvent working companies
  • Fire departments
  • Civil and underground engineering

…and wherever life and/or property needs to be protected against hazardous combustible gases or vapors.

As the G600 thermal conductivity system shows only a minimal interference by carbon dixide (CO2), this instrument is suitable for direct landfill measurements without filters. The EXOTECTOR’s functional features make it a high performance, reliable gas detector.

GfG G634P Methane Single Gas Detector (without latching alarm) - 1634-004
View Product Details >

GfG G634P Methane Single Gas Detector (without latching alarm) - 1634-004




Item #1634-004
BrandGfG
Price: $1,320.00
Quantity:
Discontinued

1634-004 G634P Methane Single Gas Detector (without latching alarm) by GfG

Versatile Combustible Gas Detection

An explosive environment is created when combustible gases or vapors reach levels that are between the lower explosion limit (LEL) and the upper explosion limit (UEL). Methane, for example, has a LEL of 5% volume and UEL of 15% volume. These levels differ depending on which combustible gas is present.

The G600 series audible and visual alarms will be triggered long before an airgas mixture has reached a dangerous concentration. The alarm threshold is usually set to 10% LEL, if not otherwise specified. The measurement principle for combustible gases and vapors in the percent LEL range is detected with a stable catalytic combustion sensor.

Various models of the G600 series use an additional detection principle on the basis of a thermal conductivity sensor. Using this system, combustible gases can be measured in concentrations up to 100% volume. Other models are available with additional ppm or micro range readings. With its internal sampling pump, extremely small amounts of gas can easily be detected from leaks in pipelines, valves and fittings.

G634P

The G634P model is ideal for measuring, detecting and warning of leak warning for combustible gases and vapors.

Features

  • Gas supply companies
  • Chemical industry
  • Laboratories
  • Storage tanks
  • Landfills
  • Solvent working companies
  • Fire departments
  • Civil and underground engineering

…and wherever life and/or property needs to be protected against hazardous combustible gases or vapors.

As the G600 thermal conductivity system shows only a minimal interference by carbon dixide (CO2), this instrument is suitable for direct landfill measurements without filters. The EXOTECTOR’s functional features make it a high performance, reliable gas detector.

GfG G634P Methane Single Gas Detector (with latching alarm) - 1634-054
View Product Details >

GfG G634P Methane Single Gas Detector (with latching alarm) - 1634-054




Item #1634-054
BrandGfG
Price: $1,430.00
Quantity:
Discontinued

1634-054 G634P Methane Single Gas Detector (with latching alarm) by GfG

Versatile Combustible Gas Detection

An explosive environment is created when combustible gases or vapors reach levels that are between the lower explosion limit (LEL) and the upper explosion limit (UEL). Methane, for example, has a LEL of 5% volume and UEL of 15% volume. These levels differ depending on which combustible gas is present.

The G600 series audible and visual alarms will be triggered long before an airgas mixture has reached a dangerous concentration. The alarm threshold is usually set to 10% LEL, if not otherwise specified. The measurement principle for combustible gases and vapors in the percent LEL range is detected with a stable catalytic combustion sensor.

Various models of the G600 series use an additional detection principle on the basis of a thermal conductivity sensor. Using this system, combustible gases can be measured in concentrations up to 100% volume. Other models are available with additional ppm or micro range readings. With its internal sampling pump, extremely small amounts of gas can easily be detected from leaks in pipelines, valves and fittings.

G634P

The G634P model is ideal for measuring, detecting and warning of leak warning for combustible gases and vapors.

Features

  • Gas supply companies
  • Chemical industry
  • Laboratories
  • Storage tanks
  • Landfills
  • Solvent working companies
  • Fire departments
  • Civil and underground engineering

…and wherever life and/or property needs to be protected against hazardous combustible gases or vapors.

As the G600 thermal conductivity system shows only a minimal interference by carbon dixide (CO2), this instrument is suitable for direct landfill measurements without filters. The EXOTECTOR’s functional features make it a high performance, reliable gas detector.

GfG G634P Special Calibration Single Gas Detector (without latching alarm) - 1634-001
View Product Details >

GfG G634P Special Calibration Single Gas Detector (without latching alarm) - 1634-001




Item #1634-001
BrandGfG
Price: $1,320.00
Quantity:
Discontinued

1634-001 G634P Special Calibration Single Gas Detector (without latching alarm) by GfG

Versatile Combustible Gas Detection

An explosive environment is created when combustible gases or vapors reach levels that are between the lower explosion limit (LEL) and the upper explosion limit (UEL). Methane, for example, has a LEL of 5% volume and UEL of 15% volume. These levels differ depending on which combustible gas is present.

The G600 series audible and visual alarms will be triggered long before an airgas mixture has reached a dangerous concentration. The alarm threshold is usually set to 10% LEL, if not otherwise specified. The measurement principle for combustible gases and vapors in the percent LEL range is detected with a stable catalytic combustion sensor.

Various models of the G600 series use an additional detection principle on the basis of a thermal conductivity sensor. Using this system, combustible gases can be measured in concentrations up to 100% volume. Other models are available with additional ppm or micro range readings. With its internal sampling pump, extremely small amounts of gas can easily be detected from leaks in pipelines, valves and fittings.

G634P

The G634P model is ideal for measuring, detecting and warning of leak warning for combustible gases and vapors.

Features

  • Gas supply companies
  • Chemical industry
  • Laboratories
  • Storage tanks
  • Landfills
  • Solvent working companies
  • Fire departments
  • Civil and underground engineering

…and wherever life and/or property needs to be protected against hazardous combustible gases or vapors.

As the G600 thermal conductivity system shows only a minimal interference by carbon dixide (CO2), this instrument is suitable for direct landfill measurements without filters. The EXOTECTOR’s functional features make it a high performance, reliable gas detector.

GfG G634P Special Calibration Single Gas Detector (with latching alarm) - 1634-051
View Product Details >

GfG G634P Special Calibration Single Gas Detector (with latching alarm) - 1634-051




Item #1634-051
BrandGfG
Price: $1,430.00
Quantity:
Discontinued

1634-051 G634P Special Calibration Single Gas Detector (with latching alarm) by GfG

Versatile Combustible Gas Detection

An explosive environment is created when combustible gases or vapors reach levels that are between the lower explosion limit (LEL) and the upper explosion limit (UEL). Methane, for example, has a LEL of 5% volume and UEL of 15% volume. These levels differ depending on which combustible gas is present.

The G600 series audible and visual alarms will be triggered long before an airgas mixture has reached a dangerous concentration. The alarm threshold is usually set to 10% LEL, if not otherwise specified. The measurement principle for combustible gases and vapors in the percent LEL range is detected with a stable catalytic combustion sensor.

Various models of the G600 series use an additional detection principle on the basis of a thermal conductivity sensor. Using this system, combustible gases can be measured in concentrations up to 100% volume. Other models are available with additional ppm or micro range readings. With its internal sampling pump, extremely small amounts of gas can easily be detected from leaks in pipelines, valves and fittings.

G634P

The G634P model is ideal for measuring, detecting and warning of leak warning for combustible gases and vapors.

Features

  • Gas supply companies
  • Chemical industry
  • Laboratories
  • Storage tanks
  • Landfills
  • Solvent working companies
  • Fire departments
  • Civil and underground engineering

…and wherever life and/or property needs to be protected against hazardous combustible gases or vapors.

As the G600 thermal conductivity system shows only a minimal interference by carbon dixide (CO2), this instrument is suitable for direct landfill measurements without filters. The EXOTECTOR’s functional features make it a high performance, reliable gas detector.

Results: 1-18 of 18
Items per page:
Sort by:
JJS Technical Services
JJS Technical Services 1900 East Golf Rd., Suite 950 Schaumburg, IL 60173

1-866-4 JJSTECH (1-866-455-7832) sales@jjstech.com

Company
Orders
More
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
Ask an Expert

1-866-4 JJSTECH(1-866-455-7832)

Email Us
  • HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  • Authorize.Net Merchant - Click to Verify

Copyright ©2000-2023. JJS Technical Services. Logos and Trademarks are the property of their respective owners. All Rights Reserved.