1-866-4 JJSTECH(1-866-455-7832)

  1. Home
  2. GfG Instruments
  3. IR 22 Series
  4. IR 22 Series Fixed Transmitters

IR 22 Series Fixed Transmitters

Results: 1-24 of 35
Filter by Category
Items per page:
Sort by:
  1. GfG IR 22 Fixed Transmitter, Base Unit (no sensor), No Display / 4-20 mA - 22260-01QUICK VIEW

    GfG IR 22 Fixed Transmitter, Base Unit (no sensor), No Display / 4-20 mA - 22260-01

    Brand: GfG | Item #: 22260-01

    $390.00
  2. GfG IR 22 Fixed Transmitter, Base Unit (no sensor), No Display / Modbus - 22260-02QUICK VIEW

    GfG IR 22 Fixed Transmitter, Base Unit (no sensor), No Display / Modbus - 22260-02

    Brand: GfG | Item #: 22260-02

    $465.00
  3. GfG IR 22 Fixed Transmitter, Base Unit (no sensor), Display / 4-20 mA - 22260-11QUICK VIEW

    GfG IR 22 Fixed Transmitter, Base Unit (no sensor), Display / 4-20 mA - 22260-11

    Brand: GfG | Item #: 22260-11

    $540.00
  4. GfG IR 22 Fixed Transmitter, Base Unit (no sensor), Display / Modbus - 22260-12QUICK VIEW

    GfG IR 22 Fixed Transmitter, Base Unit (no sensor), Display / Modbus - 22260-12

    Brand: GfG | Item #: 22260-12

    $625.00
  5. GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, No Display / 4-20 mA - IR22-804QUICK VIEW

    GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, No Display / 4-20 mA - IR22-804

    Brand: GfG | Item #: IR22-804

    $975.00
  6. GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, No Display / Modbus - IR22-804-MQUICK VIEW

    GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, No Display / Modbus - IR22-804-M

    Brand: GfG | Item #: IR22-804-M

    $1,050.00
  7. GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, Display / 4-20 mA - IR22-804-DQUICK VIEW

    GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, Display / 4-20 mA - IR22-804-D

    Brand: GfG | Item #: IR22-804-D

    $1,125.00
  8. GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, Display / Modbus - IR22-804-DMQUICK VIEW

    GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, Display / Modbus - IR22-804-DM

    Brand: GfG | Item #: IR22-804-DM

    $1,205.00
  9. GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, No Display / 4-20 mA - IR22-806QUICK VIEW

    GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, No Display / 4-20 mA - IR22-806

    Brand: GfG | Item #: IR22-806

    $975.00
  10. GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, No Display / Modbus - IR22-806-MQUICK VIEW

    GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, No Display / Modbus - IR22-806-M

    Brand: GfG | Item #: IR22-806-M

    $1,050.00
  11. GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, Display / 4-20 mA - IR22-806-DQUICK VIEW

    GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, Display / 4-20 mA - IR22-806-D

    Brand: GfG | Item #: IR22-806-D

    $1,125.00
  12. GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, Display / Modbus - IR22-806-DMQUICK VIEW

    GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, Display / Modbus - IR22-806-DM

    Brand: GfG | Item #: IR22-806-DM

    $1,205.00
  13. GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, No Display / 4-20 mA - IR22-808QUICK VIEW

    GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, No Display / 4-20 mA - IR22-808

    Brand: GfG | Item #: IR22-808

    $1,110.00
  14. GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, No Display / Modbus - IR22-808-MQUICK VIEW

    GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, No Display / Modbus - IR22-808-M

    Brand: GfG | Item #: IR22-808-M

    $1,185.00
  15. GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, Display / 4-20 mA - IR22-808-DQUICK VIEW

    GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, Display / 4-20 mA - IR22-808-D

    Brand: GfG | Item #: IR22-808-D

    $1,260.00
  16. GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, Display / Modbus - IR22-808-DMQUICK VIEW

    GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, Display / Modbus - IR22-808-DM

    Brand: GfG | Item #: IR22-808-DM

    $1,340.00
  17. GfG IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, No Display / 4-20 mA - IR22-701QUICK VIEW

    GfG IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, No Display / 4-20 mA - IR22-701

    Brand: GfG | Item #: IR22-701

    $975.00
  18. GfG IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, No Display / Modbus - IR22-701-MQUICK VIEW

    GfG IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, No Display / Modbus - IR22-701-M

    Brand: GfG | Item #: IR22-701-M

    $1,050.00
  19. GfG IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, Display / 4-20 mA - IR22-701-DQUICK VIEW

    GfG IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, Display / 4-20 mA - IR22-701-D

    Brand: GfG | Item #: IR22-701-D

    $1,125.00
  20. GfG IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, Display / Modbus - IR22-701-DMQUICK VIEW

    GfG IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, Display / Modbus - IR22-701-DM

    Brand: GfG | Item #: IR22-701-DM

    $1,205.00
  21. GfG IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, No Display / 4-20 mA - IR22-702QUICK VIEW

    GfG IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, No Display / 4-20 mA - IR22-702

    Brand: GfG | Item #: IR22-702

    $975.00
  22. GfG IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, No Display / Modbus - IR22-70-MQUICK VIEW

    GfG IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, No Display / Modbus - IR22-70-M

    Brand: GfG | Item #: IR22-70-M

    $1,300.00
  23. GfG IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, Display / 4-20 mA - IR22-70-DQUICK VIEW

    GfG IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, Display / 4-20 mA - IR22-70-D

    Brand: GfG | Item #: IR22-70-D

    $1,400.00
  24. GfG IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, Display / Modbus - IR22-70-DMQUICK VIEW

    GfG IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, Display / Modbus - IR22-70-DM

    Brand: GfG | Item #: IR22-70-DM

    $1,500.00
GfG IR 22 Fixed Transmitter, Base Unit (no sensor), No Display / 4-20 mA - 22260-01
View Product Details >

GfG IR 22 Fixed Transmitter, Base Unit (no sensor), No Display / 4-20 mA - 22260-01




Item #22260-01
BrandGfG
Price: $390.00
Quantity:

22260-01 IR 22 Fixed Transmitter, Base Unit (no sensor), No Display / 4-20 mA by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter, Base Unit (no sensor), No Display / Modbus - 22260-02
View Product Details >

GfG IR 22 Fixed Transmitter, Base Unit (no sensor), No Display / Modbus - 22260-02




Item #22260-02
BrandGfG
Price: $465.00
Quantity:

22260-02 IR 22 Fixed Transmitter, Base Unit (no sensor), No Display / Modbus by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter, Base Unit (no sensor), Display / 4-20 mA - 22260-11
View Product Details >

GfG IR 22 Fixed Transmitter, Base Unit (no sensor), Display / 4-20 mA - 22260-11




Item #22260-11
BrandGfG
Price: $540.00
Quantity:

22260-11 IR 22 Fixed Transmitter, Base Unit (no sensor), Display / 4-20 mA by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter, Base Unit (no sensor), Display / Modbus - 22260-12
View Product Details >

GfG IR 22 Fixed Transmitter, Base Unit (no sensor), Display / Modbus - 22260-12




Item #22260-12
BrandGfG
Price: $625.00
Quantity:

22260-12 IR 22 Fixed Transmitter, Base Unit (no sensor), Display / Modbus by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, No Display / 4-20 mA - IR22-804
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, No Display / 4-20 mA - IR22-804




Item #IR22-804
BrandGfG
Price: $975.00
Quantity:

IR22-804 IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, No Display / 4-20 mA by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, No Display / Modbus - IR22-804-M
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, No Display / Modbus - IR22-804-M




Item #IR22-804-M
BrandGfG
Price: $1,050.00
Quantity:

IR22-804-M IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, No Display / Modbus by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, Display / 4-20 mA - IR22-804-D
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, Display / 4-20 mA - IR22-804-D




Item #IR22-804-D
BrandGfG
Price: $1,125.00
Quantity:

IR22-804-D IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, Display / 4-20 mA by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, Display / Modbus - IR22-804-DM
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, Display / Modbus - IR22-804-DM




Item #IR22-804-DM
BrandGfG
Price: $1,205.00
Quantity:

IR22-804-DM IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 5% vol. Range, Display / Modbus by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, No Display / 4-20 mA - IR22-806
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, No Display / 4-20 mA - IR22-806




Item #IR22-806
BrandGfG
Price: $975.00
Quantity:

IR22-806 IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, No Display / 4-20 mA by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, No Display / Modbus - IR22-806-M
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, No Display / Modbus - IR22-806-M




Item #IR22-806-M
BrandGfG
Price: $1,050.00
Quantity:

IR22-806-M IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, No Display / Modbus by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, Display / 4-20 mA - IR22-806-D
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, Display / 4-20 mA - IR22-806-D




Item #IR22-806-D
BrandGfG
Price: $1,125.00
Quantity:

IR22-806-D IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, Display / 4-20 mA by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, Display / Modbus - IR22-806-DM
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, Display / Modbus - IR22-806-DM




Item #IR22-806-DM
BrandGfG
Price: $1,205.00
Quantity:

IR22-806-DM IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 1% vol. Range, Display / Modbus by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, No Display / 4-20 mA - IR22-808
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, No Display / 4-20 mA - IR22-808




Item #IR22-808
BrandGfG
Price: $1,110.00
Quantity:

IR22-808 IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, No Display / 4-20 mA by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, No Display / Modbus - IR22-808-M
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, No Display / Modbus - IR22-808-M




Item #IR22-808-M
BrandGfG
Price: $1,185.00
Quantity:

IR22-808-M IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, No Display / Modbus by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, Display / 4-20 mA - IR22-808-D
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, Display / 4-20 mA - IR22-808-D




Item #IR22-808-D
BrandGfG
Price: $1,260.00
Quantity:

IR22-808-D IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, Display / 4-20 mA by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, Display / Modbus - IR22-808-DM
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, Display / Modbus - IR22-808-DM




Item #IR22-808-DM
BrandGfG
Price: $1,340.00
Quantity:

IR22-808-DM IR 22 Fixed Transmitter with Carbon Dioxide (CO2) Sensor, 0 - 25% vol. or 0 - 50% vol. Range, Display / Modbus by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, No Display / 4-20 mA - IR22-701
View Product Details >

GfG IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, No Display / 4-20 mA - IR22-701




Item #IR22-701
BrandGfG
Price: $975.00
Quantity:

IR22-701 IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, No Display / 4-20 mA by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, No Display / Modbus - IR22-701-M
View Product Details >

GfG IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, No Display / Modbus - IR22-701-M




Item #IR22-701-M
BrandGfG
Price: $1,050.00
Quantity:

IR22-701-M IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, No Display / Modbus by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, Display / 4-20 mA - IR22-701-D
View Product Details >

GfG IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, Display / 4-20 mA - IR22-701-D




Item #IR22-701-D
BrandGfG
Price: $1,125.00
Quantity:

IR22-701-D IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, Display / 4-20 mA by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, Display / Modbus - IR22-701-DM
View Product Details >

GfG IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, Display / Modbus - IR22-701-DM




Item #IR22-701-DM
BrandGfG
Price: $1,205.00
Quantity:

IR22-701-DM IR 22 Fixed Transmitter with Methane (CH4) Sensor, 0 - 100% LEL Range, Display / Modbus by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, No Display / 4-20 mA - IR22-702
View Product Details >

GfG IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, No Display / 4-20 mA - IR22-702




Item #IR22-702
BrandGfG
Price: $975.00
Quantity:

IR22-702 IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, No Display / 4-20 mA by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, No Display / Modbus - IR22-70-M
View Product Details >

GfG IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, No Display / Modbus - IR22-70-M




Item #IR22-70-M
BrandGfG
Price: $1,300.00
Quantity:

IR22-70-M IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, No Display / Modbus by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, Display / 4-20 mA - IR22-70-D
View Product Details >

GfG IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, Display / 4-20 mA - IR22-70-D




Item #IR22-70-D
BrandGfG
Price: $1,400.00
Quantity:

IR22-70-D IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, Display / 4-20 mA by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, Display / Modbus - IR22-70-DM
View Product Details >

GfG IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, Display / Modbus - IR22-70-DM




Item #IR22-70-DM
BrandGfG
Price: $1,500.00
Quantity:

IR22-70-DM IR 22 Fixed Transmitter with Propane (C3H8) Sensor, 0 - 100% LEL Range, Display / Modbus by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 10% vol., No Display / 4-20 mA - IR22-809
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 10% vol., No Display / 4-20 mA - IR22-809




Item #IR22-809
BrandGfG
Price: $1,110.00
Quantity:

IR22-809 IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 10% vol., No Display / 4-20 mA by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 100% LEL (14% vol.), No Display / 4-20 mA - IR22-730
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 100% LEL (14% vol.), No Display / 4-20 mA - IR22-730




Item #IR22-730
BrandGfG
Price: $1,110.00
Quantity:

IR22-730 IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 100% LEL (14% vol.), No Display / 4-20 mA by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 10% vol., No Display / Modbus - IR22-809-M
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 10% vol., No Display / Modbus - IR22-809-M




Item #IR22-809-M
BrandGfG
Price: $1,185.00
Quantity:

IR22-809-M IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 10% vol., No Display / Modbus by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 100% LEL (14% vol.), No Display / Modbus - IR22-730-M
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 100% LEL (14% vol.), No Display / Modbus - IR22-730-M




Item #IR22-730-M
BrandGfG
Price: $1,160.00
Quantity:

IR22-730-M IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 100% LEL (14% vol.), No Display / Modbus by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Propane (C3H8) MK 253-0, 0 - 100% LEL, No Display / Modbus - IR22-702-M
View Product Details >

GfG IR 22 Fixed Transmitter with Propane (C3H8) MK 253-0, 0 - 100% LEL, No Display / Modbus - IR22-702-M




Item #IR22-702-M
BrandGfG
Price: $1,050.00
Quantity:

IR22-702-M IR 22 Fixed Transmitter with Propane (C3H8) MK 253-0, 0 - 100% LEL, No Display / Modbus by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 10% vol., Display / 4-20 mA - IR22-809-D
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 10% vol., Display / 4-20 mA - IR22-809-D




Item #IR22-809-D
BrandGfG
Price: $1,260.00
Quantity:

IR22-809-D IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 10% vol., Display / 4-20 mA by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 100% LEL (14% vol.), Display / 4-20 mA - IR22-730-D
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 100% LEL (14% vol.), Display / 4-20 mA - IR22-730-D




Item #IR22-730-D
BrandGfG
Price: $1,235.00
Quantity:

IR22-730-D IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 100% LEL (14% vol.), Display / 4-20 mA by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Propane (C3H8) MK 253-0, 0 - 100% LEL, Display / 4-20 mA - IR22-702-D
View Product Details >

GfG IR 22 Fixed Transmitter with Propane (C3H8) MK 253-0, 0 - 100% LEL, Display / 4-20 mA - IR22-702-D




Item #IR22-702-D
BrandGfG
Price: $1,125.00
Quantity:

IR22-702-D IR 22 Fixed Transmitter with Propane (C3H8) MK 253-0, 0 - 100% LEL, Display / 4-20 mA by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 10% vol., Display / Modbus - IR22-809-DM
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 10% vol., Display / Modbus - IR22-809-DM




Item #IR22-809-DM
BrandGfG
Price: $1,340.00
Quantity:

IR22-809-DM IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 10% vol., Display / Modbus by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 100% LEL (14% vol.), Display / Modbus - IR22-730-DM
View Product Details >

GfG IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 100% LEL (14% vol.), Display / Modbus - IR22-730-DM




Item #IR22-730-DM
BrandGfG
Price: $1,315.00
Quantity:

IR22-730-DM IR 22 Fixed Transmitter with Carbon Dioxide (CO2) MK 260-0, 0 - 100% LEL (14% vol.), Display / Modbus by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
GfG IR 22 Fixed Transmitter with Propane (C3H8) MK 253-0, 0 - 100% LEL, Display / Modbus - IR22-702-DM
View Product Details >

GfG IR 22 Fixed Transmitter with Propane (C3H8) MK 253-0, 0 - 100% LEL, Display / Modbus - IR22-702-DM




Item #IR22-702-DM
BrandGfG
Price: $1,205.00
Quantity:

IR22-702-DM IR 22 Fixed Transmitter with Propane (C3H8) MK 253-0, 0 - 100% LEL, Display / Modbus by GfG

The IR 22 transmitter combines the proven infrared measurement method to detect carbon dioxide or combustible gases (HC) with the innovative technique of the new 22 series transmitters. This new GfG transmit- ter generation has been developed and manufactured according to SIL standards.

The comprehensive user menu and the versatile setting options make this transmitter series quite flexible and adaptable to all individual requirements. Precise measurement results at various environmental conditions, as well as the large dynamic measurement range of a few ppm up to 5 % volume CO2 or 100% LEL.

Time-proven and innovative

The EC 22 is equipped with high quality GfG sensors. The transmitters are fitted with high-performance electronics for voltage stabilization, processing of readings, and temperature compensation. Follow up costs are minimized thanks to the long lifespan of the sensors.

Signal processing

The transmitter includes the complete electronic system for the signal processing and fail-safe forwarding of the measurement signal to the controller. The embedded software of the IR 22 linearises the measurement signal and compensates for environmental influences.

Therefore, when temperature variations are caused by the weather or changes of the humidity, the measured values will be accurate.

In addition, the transmitter provides the option to transfer service, maintenance and error messages to a connected GfG gas measurement controller. The IR 22 transmitter sends the signals either through an analog 4-20 mA current interface or a digital (RS485) Modbus interface.

Flexibility for any application

The IR 22 transmitter includes the sensor, status LEDs, either an analog or a digital interface, "Zero button" to adjust the zero point, and a test socket and potentiometer for the sensor calibration.

In addition, the IR 22 can be ordered with backlit graphical display. The display shows the current gas concentration, allows access to service functions, enables operation using a membrane keypad and includes optical and acoustical signal transmitters.

Features

  • Long service life of the infrared (NDIR) sensor
  • Extremely stable, low maintenance
  • Cost effective single-man adjustment
  • Output 4-20 mA or RS485 Modbus
Results: 1-24 of 35
Items per page:
Sort by:
JJS Technical Services
JJS Technical Services 1900 East Golf Rd., Suite 950 Schaumburg, IL 60173

1-866-4 JJSTECH (1-866-455-7832) sales@jjstech.com

Company
Orders
More
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
Ask an Expert

1-866-4 JJSTECH(1-866-455-7832)

Email Us
  • HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  • Authorize.Net Merchant - Click to Verify

Copyright ©2000-2023. JJS Technical Services. Logos and Trademarks are the property of their respective owners. All Rights Reserved.