Portable Ion Selective Meters

HI98172 Portable pH/ORP/ISE Meter with Calibration Check™ by Hanna Instruments

HI 98172 is a pH/ORP/ISE meter housed in a waterproof casing. Up to five point pH calibration is available with seven memorized pH buffers and five custom pH buffers to provide users with the flexibility necessary to adjust the calibration range to obtain the most accurate and precise readings.

Exchange out the pH sensor for an ORP sensor to obtain mV readings. ISE sensors are calibrated up to five points and measurements are displayed in ppm.

Calibration Check™ incorporates an electrode condition graph which alerts the user with regards to the electrode status. If readings are taken too far outside the calibration range, the unit will warn the user with a graphic signal. Users may set a reminder to notify when calibration is due.

HI 98172 features tutorial messages on the LCD and an auto-end mode to ensure readings are taken only when they are stable. Comprehensive GLP data are directly accessible by pressing the GLP key and log-on-demand holds up to 500 records. Data can be transferred to a PC via USB with optional HI 92000 software and HI 920014 USB connection cable.

• pH Calibration Check™
• Five point pH calibration with seven standard and five custom pH buffers
• Log on demand (500 samples)
• User-selectable “calibration time out”
• Tutorial messages on LCD
• PC interface via USB

Order Information:

HI 98172 is supplied with HI 1230B pH electrode, HI 7662 temperature probe, HI 70004 pH 4.01 buffer solution sachet, HI 70007 pH 7.01 buffer solution sachet, 100 mL plastic beaker, batteries, instructions and hard carrying case.

HI98185-01 pH/ORP/ISE Waterproof Portable Meter by Hanna Instruments

HI 98185 is a waterproof, portable meter designed for demanding applications. This meter measures pH/ORP/ISE and temperature.

Choose from 7 standard pH buffers and 5 custom pH buffers to obtain up to five point calibration and achieve high precision readings with a pH accuracy of ±0.002 and up to ±0.001 pH resolution.

HANNA's Calibration Check™ maintains a history of past calibrations and monitors the pH electrode and buffers during subsequent calibrations for any signs of wide calibration variances due to a dirty or broken electrode or contaminated pH buffers. In measurement mode, the electrode's percent condition is continuously displayed.

Exchange the pH probe for an ORP probe to obtain mV readings in the ±2000 mV range. HI 98185 adds direct ion concentration readings for ISE's and the results are displayed in ppm. The ion charge or nominal slope can be entered manually.

HI 98185 supports 15 different ISE sensors by default and can be calibrated with up to five points and 6 standard buffers (choice of units). This unit allows an extensive choice of measurement units (ppm, ppt, g/L, ppb, ug/L, mg/mL, M, mol/L, mmol/L, % w/v, user) and has an expanded measuring range of 1.00 x 10-7 to 9.99 x 10-10.

Press Auto-Hold while measuring and once stabilized, the current reading will remain displayed for your convenience in documenting. Switching to log-on-demand mode allows users to record and save up to 300 samples. This data can later be transferred to a PC with the USB connection and HANNA's HI 92000 software. “Out Of Calibration Range Warning” can be engaged to keep the user informed of the current calibration and helps to avoid taking measurements that are out of range.

A backlit, graphic LCD provides easy to read resolution even in low-lit conditions. A combination of dedicated and soft keys allows easy, intuitive operation in a choice of languages. Comprehensive GLP data are directly accessible by pressing the GLP key. Access the contextual Help Menu to obtain on-screen information and assistance about each feature at the touch of a button. Designed for field use, these instruments can be operated with one hand and are supplied in a rugged carrying case. With an extended battery life of up to 200 hours users are assured long operation. The inductive charger can either be plugged into a standard 115V socket with the included adapter or a 12 VDC source, such as a car's 12 V accessory outlet.

This meter come equipped with the HI 72911B pH/ temperature electrode with rugged, titanium casing.

• pH Calibration Check™
• Electrode condition on display
• Five point pH calibration with seven standard buffers and five custom buffers
• Automatic logging and log on demand
• Menu driven for ease of use
• Soft-key extended functionality
• Multiple language selection
• Contextual help at the touch of a button
• GLP features
• USB
• Backlit, graphic LCD and battery life on display
• Waterproof and rugged casing

Order Information:

HI 98185-01 (115V), HI 98185-02 (230V) and HI 98185-01 (115V) and HI 98185-02 (230V) are supplied with HI 72911B pH electrode, HI 70004 pH 4.01 buffer solution sachet, HI 70007 pH 7.01 buffer solution sachet, rechargeable batteries, HI 710042 inductive battery charger with power adapter, instructions and hard carrying case.

HI98185-02 pH/ORP/ISE Waterproof Portable Meter by Hanna Instruments

HI 98185 is a waterproof, portable meter designed for demanding applications. This meter measures pH/ORP/ISE and temperature.

Choose from 7 standard pH buffers and 5 custom pH buffers to obtain up to five point calibration and achieve high precision readings with a pH accuracy of ±0.002 and up to ±0.001 pH resolution.

HANNA's Calibration Check™ maintains a history of past calibrations and monitors the pH electrode and buffers during subsequent calibrations for any signs of wide calibration variances due to a dirty or broken electrode or contaminated pH buffers. In measurement mode, the electrode's percent condition is continuously displayed.

Exchange the pH probe for an ORP probe to obtain mV readings in the ±2000 mV range. HI 98185 adds direct ion concentration readings for ISE's and the results are displayed in ppm. The ion charge or nominal slope can be entered manually.

HI 98185 supports 15 different ISE sensors by default and can be calibrated with up to five points and 6 standard buffers (choice of units). This unit allows an extensive choice of measurement units (ppm, ppt, g/L, ppb, ug/L, mg/mL, M, mol/L, mmol/L, % w/v, user) and has an expanded measuring range of 1.00 x 10-7 to 9.99 x 10-10.

Press Auto-Hold while measuring and once stabilized, the current reading will remain displayed for your convenience in documenting. Switching to log-on-demand mode allows users to record and save up to 300 samples. This data can later be transferred to a PC with the USB connection and HANNA's HI 92000 software. “Out Of Calibration Range Warning” can be engaged to keep the user informed of the current calibration and helps to avoid taking measurements that are out of range.

A backlit, graphic LCD provides easy to read resolution even in low-lit conditions. A combination of dedicated and soft keys allows easy, intuitive operation in a choice of languages. Comprehensive GLP data are directly accessible by pressing the GLP key. Access the contextual Help Menu to obtain on-screen information and assistance about each feature at the touch of a button. Designed for field use, these instruments can be operated with one hand and are supplied in a rugged carrying case. With an extended battery life of up to 200 hours users are assured long operation. The inductive charger can either be plugged into a standard 115V socket with the included adapter or a 12 VDC source, such as a car's 12 V accessory outlet.

This meter come equipped with the HI 72911B pH/ temperature electrode with rugged, titanium casing.

• pH Calibration Check™
• Electrode condition on display
• Five point pH calibration with seven standard buffers and five custom buffers
• Automatic logging and log on demand
• Menu driven for ease of use
• Soft-key extended functionality
• Multiple language selection
• Contextual help at the touch of a button
• GLP features
• USB
• Backlit, graphic LCD and battery life on display
• Waterproof and rugged casing

Order Information:

HI 98185-01 (115V), HI 98185-02 (230V) and HI 98185-01 (115V) and HI 98185-02 (230V) are supplied with HI 72911B pH electrode, HI 70004 pH 4.01 buffer solution sachet, HI 70007 pH 7.01 buffer solution sachet, rechargeable batteries, HI 710042 inductive battery charger with power adapter, instructions and hard carrying case.

HI931100 Salinity and Sodium Content Measurement Meter by Hanna Instruments

HI 931100 is an ion-selective meter that uses a sodium electrode to read the salt (NaCl) content of a solution. This powerful instrument has four ranges, capable of measuring concentrations from 0.150 g/L to 300 g/L.

HI 931100 auto ranges from sample to sample over an extremely broad range without the need for recalibration.

A separate temperature probe, HI 7662, provides temperature readings from -20 to 120°C.

• HI 931100 measures four salinity ranges
• Tutorial messages on LCD display
• Calibration reminder
• Displays parameter and temperature readings simultaneously
• Automatic calibration
• Dual-level LCD

Order Information:

HI 931100 is supplied with batteries, rugged carrying case and instructions.

HI931101 Salinity and Sodium Content Measurement Meter by Hanna Instruments

HI 931101 uses the FC 300B combination sodium electrode (not included) to give you sodium readings from 15.0 mg/L to 60 g/L. The calibration process is automatic at 2 points, the first is at 2.3 g/L while the second can be either at 0.23 g/L (low range) or at 23.0 g/L (high range).

A separate temperature probe, HI 7662, provides temperature readings from -20 to 120°C.

• Tutorial messages on LCD display
• Calibration reminder
• Displays parameter and temperature readings simultaneously
• Automatic calibration
• Dual-level LCD

Order Information:

HI 991101 is supplied with batteries, rugged carrying case and instructions.

HI98402 Fluoride Portable Meter by Hanna Instruments

HI 98402 measures fluoride from 0.05 mg/L to 1.9 g/L in 5 distinct scales. With autoranging, HI 98402 automatically selects the range that provides the best resolution.

HI 98402 automatically compensates for temperature from -5 to 55°C using the optional HI 7662 stainless steel temperature probe. Both the temperature measured together with fluoride concentrations are displayed on the large LCD.

Calibration is automatic at 1 or two points. The calibration points can be chosen among 1 mg/L, 2 mg/L, 10 mg/L, 100 mg/L and 1000 mg/L.

HI 98402 is supplied in a rugged carrying case complete with batteries that provide up to 200 hours of continuous operation.

• Tutorial messages on LCD display
• Direct measurements in mg/L or g/L
• Waterproof, rugged housing for indoor/outdoor applications
• Extensive fluoride scale
• Automatic Temperature Compensation

Order Information:

HI 98402 is supplied with batteries, rugged carrying case and instructions.

HI931102 HACCP Compliant Salinity Foodcare Meter by Hanna Instruments

HANNA® has designed this waterproof salinity meter for use in food production .

HI 931102 is an ion-selective meter that uses a sodium electrode to read the salt (NaCl) content of a solution. This powerful instrument has four ranges, capable of measuring concentrations from 0.150 g/L to 300 g/L. This meter is able to auto range from sample to sample over an extremely broad range without the need for recalibration.

HI 931102 uses the FC 300B combination sodium electrode (not included) to give you sodium readings from 15.0 mg/L to 60 g/L. The calibration process is automatic at 2 points, the first is at 3.00 g/L while the second can be either at 0.30 g/L (low range) or at 30.0 g/L (high range).

A separate temperature probe, HI 7662, provides temperature readings from -20 to 120°C.

• Tutorial messages on LCD display
• Calibration reminder
• Displays parameter and temperature readings simultaneously
• Automatic calibration
• Dual-level LCD

Order Information:

HI 931102 is supplied with batteries, instructions and hard carrying case.