Portable Multiparameter Meters

HI9828/10-1 Multiparameter Water Quality Meter w/10m pH/EC/DO Probe/Kit by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828/10-2 Multiparameter Water Quality Meter, 10 mtr, 220V by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828/20-1 Multiparameter Water Quality Meter w/20m pH/EC/DO Probe/Kit by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828/20-2 Multiparameter Water Quality Meter and 20 m (66’) probe cable, no GPS, 230VAC by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828/30-1 Multiparameter Water Quality Meter w/30m pH/EC/DO Probe/Kit by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828/30-2 Multiparameter Water Quality Meter with GPS and 30 m (98’) probe cable, no GPS, 230VAC by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828/40-1 Multiparameter Water Quality Meter w/40m pH/EC/DO Probe/Kit by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828/40-2 Multiparameter Water Quality Meter and 40 m (131’) probe cable, no GPS, 230VAC by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828/4-1 Multiparameter Water Quality Meter w/4m pH/EC/DO Probe/Kit by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828/4-2 Multiparameter Water Quality Meter and 4 m (13.1’) probe cable, no GPS, 230VAC by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828/50-1 Multiparameter Water Quality Portable Meter with 50 mt cable by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828/50-2 Multiparameter Water Quality Meter and 50 m (164’) probe cable, no GPS, 230VAC by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828/60-1 Multiparameter Water Quality Portable Meter with 60 mt cable by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828/60-2 Multiparameter Water Quality Meter and 60 m (200’) probe cable, no GPS, 230VAC by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828/70-1 Multiparameter Water Quality P ortable Meter with 70 mt cable by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828/70-2 Multiparameter Water Quality Meter and 70 m (230’) probe cable, no GPS, 230VAC by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828/80-1 Multiparameter Water Quality P ortable Meter with 80 mt cable by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828/80-2 Multiparameter Water Quality Meter and 80 m (262’) probe cable, no GPS, 230VAC by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828/90-1 Multiparameter Water Quality P ortable Meter with 90 mt cable by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828/90-2 Multiparameter Water Quality Meter and 90 m (295’) probe cable, no GPS, 230VAC by Hanna Instruments

The HI 9828 Multiparameter meter that can measure up to 12 parameters. It is waterproof, resistant and easy to use. IT is the ideal solution for field measurements of lakes, rivers and sea. Thanks to the microprocessor based multisensor probe, it is possible to measure all the parameters necessary to evaluate the water quality, as dissolved oxygen saturation percentage, conductivity, seawater specific gravity and other parameters that ensure life in water as pH and temperature.

It is also possible to use the same probe with different meters without the need to recalibrate the system. Up to 12 parameters can be enabled and seen on the large graphic display with backlight. All readings can be memorized and associated to a precise sampling area thanks to the i-Button© system and the remarks that the operator can insert before or during measurements. The same data can be plotted on the meter and also downloaded to a PC by means of USB connector and HI92000 Windows® compatible application for successive elaborations. The setting menu can be protected by password to avoid not authorized modifications and the help function is always available to explain the selected function, operation or message.

The main features of HI9828 series includes:

• Measurement of dissolved oxygen, pH, ORP, conductivity and related parameters, temperature, atmospheric pressure and seawater specific gravity
• Field replaceable sensor modules for DO, EC and pH/ORP
• 5 interface languages: English, Spanish, French, Portuguese, Italian
• Graphical display with backlight
• GLP features
• i-Button© system to remark the sampling area
• Up to 60,000 samples stored in 100 different lots
• Four C size Ni-MH rechargeable batteries
• Batteries recharged from mains power supply and from cigarette lighter
• Password protection

HI9828010-1 GPS Multiparameter Meter with 10 m (33’) probe cable, 115VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI9828010-2 GPS Multiparameter Meter with 10 m (33’) probe cable, 230VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI9828020-1 GPS Multiparameter Meter with 20 m (66’) probe cable, 115VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI9828020-2 GPS Multiparameter Meter with 20 m (66’) probe cable, 230VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI9828030-1 GPS Multiparameter Meter with 30 m (98’) probe cable, 115VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI9828030-2 GPS Multiparameter Meter with 30 m (98’) probe cable, 230VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI9828040-1 GPS Multiparameter Meter with 40 m (131’) probe cable, 115VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI9828040-2 GPS Multiparameter Meter with 40 m (131’) probe cable, 230VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI982804-1 GPS Multiparameter Meter with 4 m (13.1’) probe cable, 115VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI982804-2 GPS Multiparameter Meter with 4 m (13.1’) probe cable, 230VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI9828050-1 GPS Multiparameter Meter with 50 m (164’) probe cable, 115VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI9828050-2 GPS Multiparameter Meter with 50 m (164’) probe cable, 230VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI9828060-1 GPS Multiparameter Meter with 60 m (200’) probe cable, 115VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI9828060-2 GPS Multiparameter Meter with 60 m (200’) probe cable, 230VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI9828070-1 GPS Multiparameter Meter with 70 m (230’) probe cable, 115VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI9828070-2 GPS Multiparameter Meter with 70 m (230’) probe cable, 230VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI9828080-1 GPS Multiparameter Meter with 80 m (262’) probe cable, 115VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI9828080-2 GPS Multiparameter Meter with 80 m (262’) probe cable, 230VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI9828090-1 GPS Multiparameter Meter with 90 m (295’) probe cable, 115VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI9828090-2 GPS Multiparameter Meter with 90 m (295’) probe cable, 230VAC by Hanna Instruments

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated). Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.

Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s

HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).

For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.

The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.

Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.

Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.

HI 769828 Multiparameter, Intelligent Probe

HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.

The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC, dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.

GPS (Global Positioning System) Enabled

The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).

GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.

Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.

HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.

Track Measurement Locations

Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.

Fast Tracker™—Tag Identification System

HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

• Display up to 12 parameters
• Track measurement locations with GPS
• Waterproof protection for meter (IP67) and probe (IP68)
• Fast Tracker™—Tag I.D. System simplifies test logging
• Graphic LCD with backlight
• Built-in barometer for DO compensation
• Quick calibration feature
• Measurement check eliminates erroneous readings
• Auto recognition of pH and pH/ORP probe
• Logger function records the data of all connected sensors
• Log on demand and automatic logging (up to 60,000 samples)
• Logged data can be displayed as graphs
• USB for PC connectivity
• Autorange of EC and TDS readings
• Good Laboratory Practice feature with last 5 calibrations recorded
• Field replaceable sensors
• Meter accepts both alkaline and rechargeable batteries
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes

Choose your configuration:

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

Order Information:

HI 9828 configurations are supplied with HI 769828 multisensor probe (pH/ORP, EC, DO, temperature), HI 9828-25 quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, HI 7698281 USB interface cable, HI 92828 Windows® compatible software and instruction manual in a rugged carrying case.

HI9829-01/10 Multiparameter Meter with 10 meter probe, ph/ORP, DO, EC by Hanna Instruments

Rugged, waterproof and easy to use, the HI 9829 is the ideal meters for field measurements of lakes, rivers and seas. Both meters display 1 to 12 parameters simultaneously from up to 15 user selectable parameters.

Combined with one of the HI 76x9829 series probes, the HI 9829 can measure water quality parameters such as pH, ORP, conductivity, turbidity, temperature, ions ions ammonium, nitrate, chloride (NH4+, NO3-—N or Cl-), dissolved oxygen concentration, resistivity, TDS, salinity, and seawater specific gravity. Atmospheric pressure is measured for DO compensation.

This meter features a graphic, backlit LCD that scales digits to fit up to 12 parameters and allows full configuration of each parameter measured along with an on-screen graphing capability.

HI 9829 incorporates comprehensive GLP features and the transferring of data via USB connection. The HI 98290’s HELP key displays context sensitive help. The alpha-numeric keypad offers a user friendly way to complete the input fields.

The Perfect Monitoring Tool

Water scientists and managers alike utilize data-collection programs as part of environmental monitoring. These programs are designed to reveal changes in water and the environment around it over time. Reliable, dependable measurements are required to monitor these changes and understand the contributions from seasonal fluctuations, weathering, as well as manmade pollution. The HI 7629829 or HI 7639829 intelligent autonomously logging probes can be left at the application site to autonomously log results without the aid of the HI 9829 or a PC. When it is time to retrieve the results the measurement data can be easily transferred to the meters or PC using HI 929829 software.

Sensors

Sensor replacement is quick and easy with screw type connectors and color coded sensors. The HI 9829 automatically recognizes sensor presence.

The HI 7609829-2 galvanic DO sensor with its fast response time can be ready at a moment’s notice. This probe features a replaceable membrane cap for easy maintenance.

The HI 7609829-3 4-electrode conductivity probe uses a polarographic measurement principle and ensures stable conductivity readings that are immune to polarization or surface coating. Absolute conductivity, temperature compensated conductivity, salinity, specific gravity and TDS determinations are possible with measurements from this sensor.

The new HI 7609829-4 EC/turbidity sensor is field replaceable and offers readings from both parameters at the same time.

All potentiometric sensors feature a double junction design and are gel filled to increase resistance to contamination. An ISE sensor can be used in place of the pH sensor and is automatically recognized. pH in mV readings are also displayed —ideal for troubleshooting.

A Great Combination

The use of HANNA’s microprocessor based multiparameter intelligent probes with HI 9829 meter will provide reliable data collection that can lead to an improved scientific understanding of the interconnections between natural, chemical and geological processes and man made pollution to effectively evaluate applications for waste-discharge permits, remediate contaminated sites and to protect or restore biological resources.

The HI 76x9829 probes utilize field replaceable sensors with auto-recognition. The sensors are housed with the probe electronics in a rugged housing with a water-tight cable connection. The base probe model permits the measurement of conductivity, pH/ORP (or an ISE), and dissolved oxygen. Other models permit turbidity and logging.

The probes are available with a choice of cable lengths such as 4 m and 10 m and 20 m (13, 33’) that utilize a DIN connection to interface with the meters. The probes are supplied with a maintenance kit in the carrying case versions. These new probes can be connected directly to a PC with the HI 96982910 USB adapter, and the HI 929829 PC software to communicate directly with the probes.

Reliable temperature measurements are a critical parameter of aquatic system monitoring. Temperature and temperature changes due to water releases can affect the ability of water to hold oxygen as well as the ability of organisms to resist certain pollutants. The intelligent probes incorporate an accurate thermistor that changes predictably with temperature changes. Accurate temperature reading in degrees Celsius, Kelvin or Fahrenheit are displayed and utilized by other detectors for temperature correction.

The pH or pH/ORP sensors incorporate the technology that has made HANNA so successful as a pH manufacturer. Reliable pH measurements are one of the most important indicators of water chemistry indicating the relative amount of free hydrogen and hydroxyl ions in the water. HANNA’s pH sensors utilize a resilient PEI body to protect them from solid particulates found water samples. Consistency and quality are the hallmarks of these sensors. Our differential measurement system further enhances the measurement reliability providing temperature corrected pH.

A choice of 3 ion selective electrodes is available for constant reporting of common surface water contaminants. Nitrate, ammonium and chloride are available. Each ISE is a combination electrode incorporating an extremely constant reference spiral; all potentionmetric probes feature a double junction and solid gelled reference design. By utilizing conductivity, the HI 9829 can convert ion activity measurements to concentration units.

The HANNA 4-electrode conductivity probe using the polarographic measurement principal ensures stable conductivity readings. Electrolytic conductivity measures of the ability of water to conduct an electrical current. It is highly dependent on the amount of dissolved solids (such as salt) in the water. Absolute conductivity, temperature corrected conductivity, salinity, specific gravity and water hardness (TDS) determinations are possible with measurements from this sensor.

The oxygen dissolved in lakes, rivers, and oceans is crucial for the organisms and creatures living in it. If dissolved oxygen concentrations drop below normal levels in water bodies, the water quality degrades and the organisms begin to die off. The galvanic sensor does not require long polarization times so is ready for measurement at a moment’s notice. Our sensor also utilizes a replaceable cap design for ease of maintenance and a safe non-toxic electrolyte. DO readings are compensated for the effects of temperature (using the probes built-in temperature sensor) and atmospheric pressure (using the HI 9829’s internal atmospheric pressure sensor).

The new HANNA turbidity sensor is a replaceable design for instantaneous turbidity reading that conforms to ISO 7027 standards. It provides measurements from 0.0 to 50.0 FNU; and 50 to 1000 FNU. Turbidity is the amount of particulate matter that is suspended in water. Turbidity measures the scattering effect that suspended solids have on light: the higher the intensity of scattered light, the higher the turbidity. Material that causes water to be turbid include: clay, silt, finely divided organic and inorganic matter, soluble colored organic compounds, plankton and microscopic organisms.

Probes with the logging function have a logging memory that allows storage of up to 140,000 individual samples or 12,000 complete sample data sets with date and time stamp thus permitting up to a 35 day deployment with all channels logging at 10 minute intervals. Logging probes work with either rechargeable or standard batteries.

The probe incorporates a temperature sensor for temperature compensation of all parameters.

Monitoring and Tracking

When data collection or monitoring requires tracking capabilities, two kinds of methods can be included with the data—timestamp and location. The timestamp expresses the date and the time when the measurement was taken. The time and date (timestamp) are determined by the internal real time clock of the HI 9829. As for location of measurement, the HI 9829 offers the FastTracker™ Tag ID system using ID encoded TAGs mounted at the location sites. Users simply touch the TAG receiver to the mounted TAG to store data along with location ID.

Fast Tracker™—Tag Identification System

HANNA’s Fact Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user-entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

iButton® Tags are Easy to Install

Install the optional TAGs near your sampling points for quick and easy iButton® readings. Each TAG contains a computer chip with a unique identification code encased in stainless steel. You can install a practically unlimited amount of TAGs. Additional TAGs can be ordered for all of your traceability requirements.

• Field replaceable ISO 7027 compliant turbidity sensor
• Ammonium, chloride and nitrate ISE’s
• Logging from probe or meter
• Fully customizable instrument, probe, sensors and measurement specifications
• Display from 1 to 12 parameters with font dimension adjustment
• Field replaceable sensors
• pH/ORP or pH, four electrode EC and galvanic DO sensors
• Auto-recognition of all sensors
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes
• Fast Tracker™—Tag I.D. System simplifies periodic monitoring
• Features a built-in barometer for DO compensation
• Quick or independent sensor calibration feature
• Measurement check eliminates erroneous readings
• Logged data can be displayed as graphs
• Graphic LCD with backlight
• USB for PC connectivity
• Good Laboratory Practice feature with last five calibrations recorded
• Meter accepts both alkaline and rechargeable batteries
• Waterproof protection for meter (IP67) and probes (IP 68)

METER ONLY, CARTON BOX PACKAGING

HI 9829-01 Meter only, charging adapter and instruction manual, 115VAC
HI 9829-02 Meter only, charging adapter and instruction manual, 230VAC

METER AND PROBE ONLY, NO SENSORS, CARRYING CASE PACKAGING

HI 98291-01 HI 9829 and HI 7629829/4 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98291-02 HI 9829 and HI 7629829/4 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98292-01 HI 9829 and HI 7639829/4 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98292-02 HI 9829 and HI 7639829/4 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98293-01 HI 9829 and HI 7629829/10 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98293-02 HI 9829 and HI 7629829/10 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98294-01 HI 9829 and HI 7639829/10 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98294-02 HI 9829 and HI 7639829/10 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC

Order Information:

Sensors for all meter and probe configurations are sold separately, see configurations up above.

HI9829-01/10T Multiparameter Meter with 10 meter probe pH/ORP, DO, EC, Turbidity by Hanna Instruments

Rugged, waterproof and easy to use, the HI 9829 is the ideal meters for field measurements of lakes, rivers and seas. Both meters display 1 to 12 parameters simultaneously from up to 15 user selectable parameters.

Combined with one of the HI 76x9829 series probes, the HI 9829 can measure water quality parameters such as pH, ORP, conductivity, turbidity, temperature, ions ions ammonium, nitrate, chloride (NH4+, NO3-—N or Cl-), dissolved oxygen concentration, resistivity, TDS, salinity, and seawater specific gravity. Atmospheric pressure is measured for DO compensation.

This meter features a graphic, backlit LCD that scales digits to fit up to 12 parameters and allows full configuration of each parameter measured along with an on-screen graphing capability.

HI 9829 incorporates comprehensive GLP features and the transferring of data via USB connection. The HI 98290’s HELP key displays context sensitive help. The alpha-numeric keypad offers a user friendly way to complete the input fields.

The Perfect Monitoring Tool

Water scientists and managers alike utilize data-collection programs as part of environmental monitoring. These programs are designed to reveal changes in water and the environment around it over time. Reliable, dependable measurements are required to monitor these changes and understand the contributions from seasonal fluctuations, weathering, as well as manmade pollution. The HI 7629829 or HI 7639829 intelligent autonomously logging probes can be left at the application site to autonomously log results without the aid of the HI 9829 or a PC. When it is time to retrieve the results the measurement data can be easily transferred to the meters or PC using HI 929829 software.

Sensors

Sensor replacement is quick and easy with screw type connectors and color coded sensors. The HI 9829 automatically recognizes sensor presence.

The HI 7609829-2 galvanic DO sensor with its fast response time can be ready at a moment’s notice. This probe features a replaceable membrane cap for easy maintenance.

The HI 7609829-3 4-electrode conductivity probe uses a polarographic measurement principle and ensures stable conductivity readings that are immune to polarization or surface coating. Absolute conductivity, temperature compensated conductivity, salinity, specific gravity and TDS determinations are possible with measurements from this sensor.

The new HI 7609829-4 EC/turbidity sensor is field replaceable and offers readings from both parameters at the same time.

All potentiometric sensors feature a double junction design and are gel filled to increase resistance to contamination. An ISE sensor can be used in place of the pH sensor and is automatically recognized. pH in mV readings are also displayed —ideal for troubleshooting.

A Great Combination

The use of HANNA’s microprocessor based multiparameter intelligent probes with HI 9829 meter will provide reliable data collection that can lead to an improved scientific understanding of the interconnections between natural, chemical and geological processes and man made pollution to effectively evaluate applications for waste-discharge permits, remediate contaminated sites and to protect or restore biological resources.

The HI 76x9829 probes utilize field replaceable sensors with auto-recognition. The sensors are housed with the probe electronics in a rugged housing with a water-tight cable connection. The base probe model permits the measurement of conductivity, pH/ORP (or an ISE), and dissolved oxygen. Other models permit turbidity and logging.

The probes are available with a choice of cable lengths such as 4 m and 10 m and 20 m (13, 33’) that utilize a DIN connection to interface with the meters. The probes are supplied with a maintenance kit in the carrying case versions. These new probes can be connected directly to a PC with the HI 96982910 USB adapter, and the HI 929829 PC software to communicate directly with the probes.

Reliable temperature measurements are a critical parameter of aquatic system monitoring. Temperature and temperature changes due to water releases can affect the ability of water to hold oxygen as well as the ability of organisms to resist certain pollutants. The intelligent probes incorporate an accurate thermistor that changes predictably with temperature changes. Accurate temperature reading in degrees Celsius, Kelvin or Fahrenheit are displayed and utilized by other detectors for temperature correction.

The pH or pH/ORP sensors incorporate the technology that has made HANNA so successful as a pH manufacturer. Reliable pH measurements are one of the most important indicators of water chemistry indicating the relative amount of free hydrogen and hydroxyl ions in the water. HANNA’s pH sensors utilize a resilient PEI body to protect them from solid particulates found water samples. Consistency and quality are the hallmarks of these sensors. Our differential measurement system further enhances the measurement reliability providing temperature corrected pH.

A choice of 3 ion selective electrodes is available for constant reporting of common surface water contaminants. Nitrate, ammonium and chloride are available. Each ISE is a combination electrode incorporating an extremely constant reference spiral; all potentionmetric probes feature a double junction and solid gelled reference design. By utilizing conductivity, the HI 9829 can convert ion activity measurements to concentration units.

The HANNA 4-electrode conductivity probe using the polarographic measurement principal ensures stable conductivity readings. Electrolytic conductivity measures of the ability of water to conduct an electrical current. It is highly dependent on the amount of dissolved solids (such as salt) in the water. Absolute conductivity, temperature corrected conductivity, salinity, specific gravity and water hardness (TDS) determinations are possible with measurements from this sensor.

The oxygen dissolved in lakes, rivers, and oceans is crucial for the organisms and creatures living in it. If dissolved oxygen concentrations drop below normal levels in water bodies, the water quality degrades and the organisms begin to die off. The galvanic sensor does not require long polarization times so is ready for measurement at a moment’s notice. Our sensor also utilizes a replaceable cap design for ease of maintenance and a safe non-toxic electrolyte. DO readings are compensated for the effects of temperature (using the probes built-in temperature sensor) and atmospheric pressure (using the HI 9829’s internal atmospheric pressure sensor).

The new HANNA turbidity sensor is a replaceable design for instantaneous turbidity reading that conforms to ISO 7027 standards. It provides measurements from 0.0 to 50.0 FNU; and 50 to 1000 FNU. Turbidity is the amount of particulate matter that is suspended in water. Turbidity measures the scattering effect that suspended solids have on light: the higher the intensity of scattered light, the higher the turbidity. Material that causes water to be turbid include: clay, silt, finely divided organic and inorganic matter, soluble colored organic compounds, plankton and microscopic organisms.

Probes with the logging function have a logging memory that allows storage of up to 140,000 individual samples or 12,000 complete sample data sets with date and time stamp thus permitting up to a 35 day deployment with all channels logging at 10 minute intervals. Logging probes work with either rechargeable or standard batteries.

The probe incorporates a temperature sensor for temperature compensation of all parameters.

Monitoring and Tracking

When data collection or monitoring requires tracking capabilities, two kinds of methods can be included with the data—timestamp and location. The timestamp expresses the date and the time when the measurement was taken. The time and date (timestamp) are determined by the internal real time clock of the HI 9829. As for location of measurement, the HI 9829 offers the FastTracker™ Tag ID system using ID encoded TAGs mounted at the location sites. Users simply touch the TAG receiver to the mounted TAG to store data along with location ID.

Fast Tracker™—Tag Identification System

HANNA’s Fact Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user-entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

iButton® Tags are Easy to Install

Install the optional TAGs near your sampling points for quick and easy iButton® readings. Each TAG contains a computer chip with a unique identification code encased in stainless steel. You can install a practically unlimited amount of TAGs. Additional TAGs can be ordered for all of your traceability requirements.

• Field replaceable ISO 7027 compliant turbidity sensor
• Ammonium, chloride and nitrate ISE’s
• Logging from probe or meter
• Fully customizable instrument, probe, sensors and measurement specifications
• Display from 1 to 12 parameters with font dimension adjustment
• Field replaceable sensors
• pH/ORP or pH, four electrode EC and galvanic DO sensors
• Auto-recognition of all sensors
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes
• Fast Tracker™—Tag I.D. System simplifies periodic monitoring
• Features a built-in barometer for DO compensation
• Quick or independent sensor calibration feature
• Measurement check eliminates erroneous readings
• Logged data can be displayed as graphs
• Graphic LCD with backlight
• USB for PC connectivity
• Good Laboratory Practice feature with last five calibrations recorded
• Meter accepts both alkaline and rechargeable batteries
• Waterproof protection for meter (IP67) and probes (IP 68)

METER ONLY, CARTON BOX PACKAGING

HI 9829-01 Meter only, charging adapter and instruction manual, 115VAC
HI 9829-02 Meter only, charging adapter and instruction manual, 230VAC

METER AND PROBE ONLY, NO SENSORS, CARRYING CASE PACKAGING

HI 98291-01 HI 9829 and HI 7629829/4 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98291-02 HI 9829 and HI 7629829/4 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98292-01 HI 9829 and HI 7639829/4 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98292-02 HI 9829 and HI 7639829/4 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98293-01 HI 9829 and HI 7629829/10 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98293-02 HI 9829 and HI 7629829/10 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98294-01 HI 9829 and HI 7639829/10 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98294-02 HI 9829 and HI 7639829/10 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC

Order Information:

Sensors for all meter and probe configurations are sold separately, see configurations up above.

HI9829-01/4 Multiparameter Meter with 4 meter probe pH/ORP/DO/EC sensors by Hanna Instruments

Rugged, waterproof and easy to use, the HI 9829 is the ideal meters for field measurements of lakes, rivers and seas. Both meters display 1 to 12 parameters simultaneously from up to 15 user selectable parameters.

Combined with one of the HI 76x9829 series probes, the HI 9829 can measure water quality parameters such as pH, ORP, conductivity, turbidity, temperature, ions ions ammonium, nitrate, chloride (NH4+, NO3-—N or Cl-), dissolved oxygen concentration, resistivity, TDS, salinity, and seawater specific gravity. Atmospheric pressure is measured for DO compensation.

This meter features a graphic, backlit LCD that scales digits to fit up to 12 parameters and allows full configuration of each parameter measured along with an on-screen graphing capability.

HI 9829 incorporates comprehensive GLP features and the transferring of data via USB connection. The HI 98290’s HELP key displays context sensitive help. The alpha-numeric keypad offers a user friendly way to complete the input fields.

The Perfect Monitoring Tool

Water scientists and managers alike utilize data-collection programs as part of environmental monitoring. These programs are designed to reveal changes in water and the environment around it over time. Reliable, dependable measurements are required to monitor these changes and understand the contributions from seasonal fluctuations, weathering, as well as manmade pollution. The HI 7629829 or HI 7639829 intelligent autonomously logging probes can be left at the application site to autonomously log results without the aid of the HI 9829 or a PC. When it is time to retrieve the results the measurement data can be easily transferred to the meters or PC using HI 929829 software.

Sensors

Sensor replacement is quick and easy with screw type connectors and color coded sensors. The HI 9829 automatically recognizes sensor presence.

The HI 7609829-2 galvanic DO sensor with its fast response time can be ready at a moment’s notice. This probe features a replaceable membrane cap for easy maintenance.

The HI 7609829-3 4-electrode conductivity probe uses a polarographic measurement principle and ensures stable conductivity readings that are immune to polarization or surface coating. Absolute conductivity, temperature compensated conductivity, salinity, specific gravity and TDS determinations are possible with measurements from this sensor.

The new HI 7609829-4 EC/turbidity sensor is field replaceable and offers readings from both parameters at the same time.

All potentiometric sensors feature a double junction design and are gel filled to increase resistance to contamination. An ISE sensor can be used in place of the pH sensor and is automatically recognized. pH in mV readings are also displayed —ideal for troubleshooting.

A Great Combination

The use of HANNA’s microprocessor based multiparameter intelligent probes with HI 9829 meter will provide reliable data collection that can lead to an improved scientific understanding of the interconnections between natural, chemical and geological processes and man made pollution to effectively evaluate applications for waste-discharge permits, remediate contaminated sites and to protect or restore biological resources.

The HI 76x9829 probes utilize field replaceable sensors with auto-recognition. The sensors are housed with the probe electronics in a rugged housing with a water-tight cable connection. The base probe model permits the measurement of conductivity, pH/ORP (or an ISE), and dissolved oxygen. Other models permit turbidity and logging.

The probes are available with a choice of cable lengths such as 4 m and 10 m and 20 m (13, 33’) that utilize a DIN connection to interface with the meters. The probes are supplied with a maintenance kit in the carrying case versions. These new probes can be connected directly to a PC with the HI 96982910 USB adapter, and the HI 929829 PC software to communicate directly with the probes.

Reliable temperature measurements are a critical parameter of aquatic system monitoring. Temperature and temperature changes due to water releases can affect the ability of water to hold oxygen as well as the ability of organisms to resist certain pollutants. The intelligent probes incorporate an accurate thermistor that changes predictably with temperature changes. Accurate temperature reading in degrees Celsius, Kelvin or Fahrenheit are displayed and utilized by other detectors for temperature correction.

The pH or pH/ORP sensors incorporate the technology that has made HANNA so successful as a pH manufacturer. Reliable pH measurements are one of the most important indicators of water chemistry indicating the relative amount of free hydrogen and hydroxyl ions in the water. HANNA’s pH sensors utilize a resilient PEI body to protect them from solid particulates found water samples. Consistency and quality are the hallmarks of these sensors. Our differential measurement system further enhances the measurement reliability providing temperature corrected pH.

A choice of 3 ion selective electrodes is available for constant reporting of common surface water contaminants. Nitrate, ammonium and chloride are available. Each ISE is a combination electrode incorporating an extremely constant reference spiral; all potentionmetric probes feature a double junction and solid gelled reference design. By utilizing conductivity, the HI 9829 can convert ion activity measurements to concentration units.

The HANNA 4-electrode conductivity probe using the polarographic measurement principal ensures stable conductivity readings. Electrolytic conductivity measures of the ability of water to conduct an electrical current. It is highly dependent on the amount of dissolved solids (such as salt) in the water. Absolute conductivity, temperature corrected conductivity, salinity, specific gravity and water hardness (TDS) determinations are possible with measurements from this sensor.

The oxygen dissolved in lakes, rivers, and oceans is crucial for the organisms and creatures living in it. If dissolved oxygen concentrations drop below normal levels in water bodies, the water quality degrades and the organisms begin to die off. The galvanic sensor does not require long polarization times so is ready for measurement at a moment’s notice. Our sensor also utilizes a replaceable cap design for ease of maintenance and a safe non-toxic electrolyte. DO readings are compensated for the effects of temperature (using the probes built-in temperature sensor) and atmospheric pressure (using the HI 9829’s internal atmospheric pressure sensor).

The new HANNA turbidity sensor is a replaceable design for instantaneous turbidity reading that conforms to ISO 7027 standards. It provides measurements from 0.0 to 50.0 FNU; and 50 to 1000 FNU. Turbidity is the amount of particulate matter that is suspended in water. Turbidity measures the scattering effect that suspended solids have on light: the higher the intensity of scattered light, the higher the turbidity. Material that causes water to be turbid include: clay, silt, finely divided organic and inorganic matter, soluble colored organic compounds, plankton and microscopic organisms.

Probes with the logging function have a logging memory that allows storage of up to 140,000 individual samples or 12,000 complete sample data sets with date and time stamp thus permitting up to a 35 day deployment with all channels logging at 10 minute intervals. Logging probes work with either rechargeable or standard batteries.

The probe incorporates a temperature sensor for temperature compensation of all parameters.

Monitoring and Tracking

When data collection or monitoring requires tracking capabilities, two kinds of methods can be included with the data—timestamp and location. The timestamp expresses the date and the time when the measurement was taken. The time and date (timestamp) are determined by the internal real time clock of the HI 9829. As for location of measurement, the HI 9829 offers the FastTracker™ Tag ID system using ID encoded TAGs mounted at the location sites. Users simply touch the TAG receiver to the mounted TAG to store data along with location ID.

Fast Tracker™—Tag Identification System

HANNA’s Fact Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user-entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

iButton® Tags are Easy to Install

Install the optional TAGs near your sampling points for quick and easy iButton® readings. Each TAG contains a computer chip with a unique identification code encased in stainless steel. You can install a practically unlimited amount of TAGs. Additional TAGs can be ordered for all of your traceability requirements.

• Field replaceable ISO 7027 compliant turbidity sensor
• Ammonium, chloride and nitrate ISE’s
• Logging from probe or meter
• Fully customizable instrument, probe, sensors and measurement specifications
• Display from 1 to 12 parameters with font dimension adjustment
• Field replaceable sensors
• pH/ORP or pH, four electrode EC and galvanic DO sensors
• Auto-recognition of all sensors
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes
• Fast Tracker™—Tag I.D. System simplifies periodic monitoring
• Features a built-in barometer for DO compensation
• Quick or independent sensor calibration feature
• Measurement check eliminates erroneous readings
• Logged data can be displayed as graphs
• Graphic LCD with backlight
• USB for PC connectivity
• Good Laboratory Practice feature with last five calibrations recorded
• Meter accepts both alkaline and rechargeable batteries
• Waterproof protection for meter (IP67) and probes (IP 68)

METER ONLY, CARTON BOX PACKAGING

HI 9829-01 Meter only, charging adapter and instruction manual, 115VAC
HI 9829-02 Meter only, charging adapter and instruction manual, 230VAC

METER AND PROBE ONLY, NO SENSORS, CARRYING CASE PACKAGING

HI 98291-01 HI 9829 and HI 7629829/4 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98291-02 HI 9829 and HI 7629829/4 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98292-01 HI 9829 and HI 7639829/4 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98292-02 HI 9829 and HI 7639829/4 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98293-01 HI 9829 and HI 7629829/10 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98293-02 HI 9829 and HI 7629829/10 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98294-01 HI 9829 and HI 7639829/10 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98294-02 HI 9829 and HI 7639829/10 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC

Order Information:

Sensors for all meter and probe configurations are sold separately, see configurations up above.

HI9829-01/4T Multiparameter Meter with 4 meter cable, ph/ORP,DO, EC & Turbidity by Hanna Instruments

Rugged, waterproof and easy to use, the HI 9829 is the ideal meters for field measurements of lakes, rivers and seas. Both meters display 1 to 12 parameters simultaneously from up to 15 user selectable parameters.

Combined with one of the HI 76x9829 series probes, the HI 9829 can measure water quality parameters such as pH, ORP, conductivity, turbidity, temperature, ions ions ammonium, nitrate, chloride (NH4+, NO3-—N or Cl-), dissolved oxygen concentration, resistivity, TDS, salinity, and seawater specific gravity. Atmospheric pressure is measured for DO compensation.

This meter features a graphic, backlit LCD that scales digits to fit up to 12 parameters and allows full configuration of each parameter measured along with an on-screen graphing capability.

HI 9829 incorporates comprehensive GLP features and the transferring of data via USB connection. The HI 98290’s HELP key displays context sensitive help. The alpha-numeric keypad offers a user friendly way to complete the input fields.

The Perfect Monitoring Tool

Water scientists and managers alike utilize data-collection programs as part of environmental monitoring. These programs are designed to reveal changes in water and the environment around it over time. Reliable, dependable measurements are required to monitor these changes and understand the contributions from seasonal fluctuations, weathering, as well as manmade pollution. The HI 7629829 or HI 7639829 intelligent autonomously logging probes can be left at the application site to autonomously log results without the aid of the HI 9829 or a PC. When it is time to retrieve the results the measurement data can be easily transferred to the meters or PC using HI 929829 software.

Sensors

Sensor replacement is quick and easy with screw type connectors and color coded sensors. The HI 9829 automatically recognizes sensor presence.

The HI 7609829-2 galvanic DO sensor with its fast response time can be ready at a moment’s notice. This probe features a replaceable membrane cap for easy maintenance.

The HI 7609829-3 4-electrode conductivity probe uses a polarographic measurement principle and ensures stable conductivity readings that are immune to polarization or surface coating. Absolute conductivity, temperature compensated conductivity, salinity, specific gravity and TDS determinations are possible with measurements from this sensor.

The new HI 7609829-4 EC/turbidity sensor is field replaceable and offers readings from both parameters at the same time.

All potentiometric sensors feature a double junction design and are gel filled to increase resistance to contamination. An ISE sensor can be used in place of the pH sensor and is automatically recognized. pH in mV readings are also displayed —ideal for troubleshooting.

A Great Combination

The use of HANNA’s microprocessor based multiparameter intelligent probes with HI 9829 meter will provide reliable data collection that can lead to an improved scientific understanding of the interconnections between natural, chemical and geological processes and man made pollution to effectively evaluate applications for waste-discharge permits, remediate contaminated sites and to protect or restore biological resources.

The HI 76x9829 probes utilize field replaceable sensors with auto-recognition. The sensors are housed with the probe electronics in a rugged housing with a water-tight cable connection. The base probe model permits the measurement of conductivity, pH/ORP (or an ISE), and dissolved oxygen. Other models permit turbidity and logging.

The probes are available with a choice of cable lengths such as 4 m and 10 m and 20 m (13, 33’) that utilize a DIN connection to interface with the meters. The probes are supplied with a maintenance kit in the carrying case versions. These new probes can be connected directly to a PC with the HI 96982910 USB adapter, and the HI 929829 PC software to communicate directly with the probes.

Reliable temperature measurements are a critical parameter of aquatic system monitoring. Temperature and temperature changes due to water releases can affect the ability of water to hold oxygen as well as the ability of organisms to resist certain pollutants. The intelligent probes incorporate an accurate thermistor that changes predictably with temperature changes. Accurate temperature reading in degrees Celsius, Kelvin or Fahrenheit are displayed and utilized by other detectors for temperature correction.

The pH or pH/ORP sensors incorporate the technology that has made HANNA so successful as a pH manufacturer. Reliable pH measurements are one of the most important indicators of water chemistry indicating the relative amount of free hydrogen and hydroxyl ions in the water. HANNA’s pH sensors utilize a resilient PEI body to protect them from solid particulates found water samples. Consistency and quality are the hallmarks of these sensors. Our differential measurement system further enhances the measurement reliability providing temperature corrected pH.

A choice of 3 ion selective electrodes is available for constant reporting of common surface water contaminants. Nitrate, ammonium and chloride are available. Each ISE is a combination electrode incorporating an extremely constant reference spiral; all potentionmetric probes feature a double junction and solid gelled reference design. By utilizing conductivity, the HI 9829 can convert ion activity measurements to concentration units.

The HANNA 4-electrode conductivity probe using the polarographic measurement principal ensures stable conductivity readings. Electrolytic conductivity measures of the ability of water to conduct an electrical current. It is highly dependent on the amount of dissolved solids (such as salt) in the water. Absolute conductivity, temperature corrected conductivity, salinity, specific gravity and water hardness (TDS) determinations are possible with measurements from this sensor.

The oxygen dissolved in lakes, rivers, and oceans is crucial for the organisms and creatures living in it. If dissolved oxygen concentrations drop below normal levels in water bodies, the water quality degrades and the organisms begin to die off. The galvanic sensor does not require long polarization times so is ready for measurement at a moment’s notice. Our sensor also utilizes a replaceable cap design for ease of maintenance and a safe non-toxic electrolyte. DO readings are compensated for the effects of temperature (using the probes built-in temperature sensor) and atmospheric pressure (using the HI 9829’s internal atmospheric pressure sensor).

The new HANNA turbidity sensor is a replaceable design for instantaneous turbidity reading that conforms to ISO 7027 standards. It provides measurements from 0.0 to 50.0 FNU; and 50 to 1000 FNU. Turbidity is the amount of particulate matter that is suspended in water. Turbidity measures the scattering effect that suspended solids have on light: the higher the intensity of scattered light, the higher the turbidity. Material that causes water to be turbid include: clay, silt, finely divided organic and inorganic matter, soluble colored organic compounds, plankton and microscopic organisms.

Probes with the logging function have a logging memory that allows storage of up to 140,000 individual samples or 12,000 complete sample data sets with date and time stamp thus permitting up to a 35 day deployment with all channels logging at 10 minute intervals. Logging probes work with either rechargeable or standard batteries.

The probe incorporates a temperature sensor for temperature compensation of all parameters.

Monitoring and Tracking

When data collection or monitoring requires tracking capabilities, two kinds of methods can be included with the data—timestamp and location. The timestamp expresses the date and the time when the measurement was taken. The time and date (timestamp) are determined by the internal real time clock of the HI 9829. As for location of measurement, the HI 9829 offers the FastTracker™ Tag ID system using ID encoded TAGs mounted at the location sites. Users simply touch the TAG receiver to the mounted TAG to store data along with location ID.

Fast Tracker™—Tag Identification System

HANNA’s Fact Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user-entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

iButton® Tags are Easy to Install

Install the optional TAGs near your sampling points for quick and easy iButton® readings. Each TAG contains a computer chip with a unique identification code encased in stainless steel. You can install a practically unlimited amount of TAGs. Additional TAGs can be ordered for all of your traceability requirements.

• Field replaceable ISO 7027 compliant turbidity sensor
• Ammonium, chloride and nitrate ISE’s
• Logging from probe or meter
• Fully customizable instrument, probe, sensors and measurement specifications
• Display from 1 to 12 parameters with font dimension adjustment
• Field replaceable sensors
• pH/ORP or pH, four electrode EC and galvanic DO sensors
• Auto-recognition of all sensors
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes
• Fast Tracker™—Tag I.D. System simplifies periodic monitoring
• Features a built-in barometer for DO compensation
• Quick or independent sensor calibration feature
• Measurement check eliminates erroneous readings
• Logged data can be displayed as graphs
• Graphic LCD with backlight
• USB for PC connectivity
• Good Laboratory Practice feature with last five calibrations recorded
• Meter accepts both alkaline and rechargeable batteries
• Waterproof protection for meter (IP67) and probes (IP 68)

METER ONLY, CARTON BOX PACKAGING

HI 9829-01 Meter only, charging adapter and instruction manual, 115VAC
HI 9829-02 Meter only, charging adapter and instruction manual, 230VAC

METER AND PROBE ONLY, NO SENSORS, CARRYING CASE PACKAGING

HI 98291-01 HI 9829 and HI 7629829/4 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98291-02 HI 9829 and HI 7629829/4 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98292-01 HI 9829 and HI 7639829/4 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98292-02 HI 9829 and HI 7639829/4 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98293-01 HI 9829 and HI 7629829/10 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98293-02 HI 9829 and HI 7629829/10 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98294-01 HI 9829 and HI 7639829/10 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98294-02 HI 9829 and HI 7639829/10 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC

Order Information:

Sensors for all meter and probe configurations are sold separately, see configurations up above.

HI98291-01L Multiparameter Meter with HI 7629829/4 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC by Hanna Instruments

Rugged, waterproof and easy to use, the HI 9829 is the ideal meters for field measurements of lakes, rivers and seas. Both meters display 1 to 12 parameters simultaneously from up to 15 user selectable parameters.

Combined with one of the HI 76x9829 series probes, the HI 9829 can measure water quality parameters such as pH, ORP, conductivity, turbidity, temperature, ions ions ammonium, nitrate, chloride (NH4+, NO3-—N or Cl-), dissolved oxygen concentration, resistivity, TDS, salinity, and seawater specific gravity. Atmospheric pressure is measured for DO compensation.

This meter features a graphic, backlit LCD that scales digits to fit up to 12 parameters and allows full configuration of each parameter measured along with an on-screen graphing capability.

HI 9829 incorporates comprehensive GLP features and the transferring of data via USB connection. The HI 98290’s HELP key displays context sensitive help. The alpha-numeric keypad offers a user friendly way to complete the input fields.

The Perfect Monitoring Tool

Water scientists and managers alike utilize data-collection programs as part of environmental monitoring. These programs are designed to reveal changes in water and the environment around it over time. Reliable, dependable measurements are required to monitor these changes and understand the contributions from seasonal fluctuations, weathering, as well as manmade pollution. The HI 7629829 or HI 7639829 intelligent autonomously logging probes can be left at the application site to autonomously log results without the aid of the HI 9829 or a PC. When it is time to retrieve the results the measurement data can be easily transferred to the meters or PC using HI 929829 software.

Sensors

Sensor replacement is quick and easy with screw type connectors and color coded sensors. The HI 9829 automatically recognizes sensor presence.

The HI 7609829-2 galvanic DO sensor with its fast response time can be ready at a moment’s notice. This probe features a replaceable membrane cap for easy maintenance.

The HI 7609829-3 4-electrode conductivity probe uses a polarographic measurement principle and ensures stable conductivity readings that are immune to polarization or surface coating. Absolute conductivity, temperature compensated conductivity, salinity, specific gravity and TDS determinations are possible with measurements from this sensor.

The new HI 7609829-4 EC/turbidity sensor is field replaceable and offers readings from both parameters at the same time.

All potentiometric sensors feature a double junction design and are gel filled to increase resistance to contamination. An ISE sensor can be used in place of the pH sensor and is automatically recognized. pH in mV readings are also displayed —ideal for troubleshooting.

A Great Combination

The use of HANNA’s microprocessor based multiparameter intelligent probes with HI 9829 meter will provide reliable data collection that can lead to an improved scientific understanding of the interconnections between natural, chemical and geological processes and man made pollution to effectively evaluate applications for waste-discharge permits, remediate contaminated sites and to protect or restore biological resources.

The HI 76x9829 probes utilize field replaceable sensors with auto-recognition. The sensors are housed with the probe electronics in a rugged housing with a water-tight cable connection. The base probe model permits the measurement of conductivity, pH/ORP (or an ISE), and dissolved oxygen. Other models permit turbidity and logging.

The probes are available with a choice of cable lengths such as 4 m and 10 m and 20 m (13, 33’) that utilize a DIN connection to interface with the meters. The probes are supplied with a maintenance kit in the carrying case versions. These new probes can be connected directly to a PC with the HI 96982910 USB adapter, and the HI 929829 PC software to communicate directly with the probes.

Reliable temperature measurements are a critical parameter of aquatic system monitoring. Temperature and temperature changes due to water releases can affect the ability of water to hold oxygen as well as the ability of organisms to resist certain pollutants. The intelligent probes incorporate an accurate thermistor that changes predictably with temperature changes. Accurate temperature reading in degrees Celsius, Kelvin or Fahrenheit are displayed and utilized by other detectors for temperature correction.

The pH or pH/ORP sensors incorporate the technology that has made HANNA so successful as a pH manufacturer. Reliable pH measurements are one of the most important indicators of water chemistry indicating the relative amount of free hydrogen and hydroxyl ions in the water. HANNA’s pH sensors utilize a resilient PEI body to protect them from solid particulates found water samples. Consistency and quality are the hallmarks of these sensors. Our differential measurement system further enhances the measurement reliability providing temperature corrected pH.

A choice of 3 ion selective electrodes is available for constant reporting of common surface water contaminants. Nitrate, ammonium and chloride are available. Each ISE is a combination electrode incorporating an extremely constant reference spiral; all potentionmetric probes feature a double junction and solid gelled reference design. By utilizing conductivity, the HI 9829 can convert ion activity measurements to concentration units.

The HANNA 4-electrode conductivity probe using the polarographic measurement principal ensures stable conductivity readings. Electrolytic conductivity measures of the ability of water to conduct an electrical current. It is highly dependent on the amount of dissolved solids (such as salt) in the water. Absolute conductivity, temperature corrected conductivity, salinity, specific gravity and water hardness (TDS) determinations are possible with measurements from this sensor.

The oxygen dissolved in lakes, rivers, and oceans is crucial for the organisms and creatures living in it. If dissolved oxygen concentrations drop below normal levels in water bodies, the water quality degrades and the organisms begin to die off. The galvanic sensor does not require long polarization times so is ready for measurement at a moment’s notice. Our sensor also utilizes a replaceable cap design for ease of maintenance and a safe non-toxic electrolyte. DO readings are compensated for the effects of temperature (using the probes built-in temperature sensor) and atmospheric pressure (using the HI 9829’s internal atmospheric pressure sensor).

The new HANNA turbidity sensor is a replaceable design for instantaneous turbidity reading that conforms to ISO 7027 standards. It provides measurements from 0.0 to 50.0 FNU; and 50 to 1000 FNU. Turbidity is the amount of particulate matter that is suspended in water. Turbidity measures the scattering effect that suspended solids have on light: the higher the intensity of scattered light, the higher the turbidity. Material that causes water to be turbid include: clay, silt, finely divided organic and inorganic matter, soluble colored organic compounds, plankton and microscopic organisms.

Probes with the logging function have a logging memory that allows storage of up to 140,000 individual samples or 12,000 complete sample data sets with date and time stamp thus permitting up to a 35 day deployment with all channels logging at 10 minute intervals. Logging probes work with either rechargeable or standard batteries.

The probe incorporates a temperature sensor for temperature compensation of all parameters.

Monitoring and Tracking

When data collection or monitoring requires tracking capabilities, two kinds of methods can be included with the data—timestamp and location. The timestamp expresses the date and the time when the measurement was taken. The time and date (timestamp) are determined by the internal real time clock of the HI 9829. As for location of measurement, the HI 9829 offers the FastTracker™ Tag ID system using ID encoded TAGs mounted at the location sites. Users simply touch the TAG receiver to the mounted TAG to store data along with location ID.

Fast Tracker™—Tag Identification System

HANNA’s Fact Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user-entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

iButton® Tags are Easy to Install

Install the optional TAGs near your sampling points for quick and easy iButton® readings. Each TAG contains a computer chip with a unique identification code encased in stainless steel. You can install a practically unlimited amount of TAGs. Additional TAGs can be ordered for all of your traceability requirements.

• Field replaceable ISO 7027 compliant turbidity sensor
• Ammonium, chloride and nitrate ISE’s
• Logging from probe or meter
• Fully customizable instrument, probe, sensors and measurement specifications
• Display from 1 to 12 parameters with font dimension adjustment
• Field replaceable sensors
• pH/ORP or pH, four electrode EC and galvanic DO sensors
• Auto-recognition of all sensors
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes
• Fast Tracker™—Tag I.D. System simplifies periodic monitoring
• Features a built-in barometer for DO compensation
• Quick or independent sensor calibration feature
• Measurement check eliminates erroneous readings
• Logged data can be displayed as graphs
• Graphic LCD with backlight
• USB for PC connectivity
• Good Laboratory Practice feature with last five calibrations recorded
• Meter accepts both alkaline and rechargeable batteries
• Waterproof protection for meter (IP67) and probes (IP 68)

METER ONLY, CARTON BOX PACKAGING

HI 9829-01 Meter only, charging adapter and instruction manual, 115VAC
HI 9829-02 Meter only, charging adapter and instruction manual, 230VAC

METER AND PROBE ONLY, NO SENSORS, CARRYING CASE PACKAGING

HI 98291-01 HI 9829 and HI 7629829/4 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98291-02 HI 9829 and HI 7629829/4 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98292-01 HI 9829 and HI 7639829/4 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98292-02 HI 9829 and HI 7639829/4 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98293-01 HI 9829 and HI 7629829/10 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98293-02 HI 9829 and HI 7629829/10 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98294-01 HI 9829 and HI 7639829/10 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98294-02 HI 9829 and HI 7639829/10 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC

Order Information:

Sensors for all meter and probe configurations are sold separately, see configurations up above.

HI98292-01LT Multiparameter Meter with HI 7639829/4 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC by Hanna Instruments

Rugged, waterproof and easy to use, the HI 9829 is the ideal meters for field measurements of lakes, rivers and seas. Both meters display 1 to 12 parameters simultaneously from up to 15 user selectable parameters.

Combined with one of the HI 76x9829 series probes, the HI 9829 can measure water quality parameters such as pH, ORP, conductivity, turbidity, temperature, ions ions ammonium, nitrate, chloride (NH4+, NO3-—N or Cl-), dissolved oxygen concentration, resistivity, TDS, salinity, and seawater specific gravity. Atmospheric pressure is measured for DO compensation.

This meter features a graphic, backlit LCD that scales digits to fit up to 12 parameters and allows full configuration of each parameter measured along with an on-screen graphing capability.

HI 9829 incorporates comprehensive GLP features and the transferring of data via USB connection. The HI 98290’s HELP key displays context sensitive help. The alpha-numeric keypad offers a user friendly way to complete the input fields.

The Perfect Monitoring Tool

Water scientists and managers alike utilize data-collection programs as part of environmental monitoring. These programs are designed to reveal changes in water and the environment around it over time. Reliable, dependable measurements are required to monitor these changes and understand the contributions from seasonal fluctuations, weathering, as well as manmade pollution. The HI 7629829 or HI 7639829 intelligent autonomously logging probes can be left at the application site to autonomously log results without the aid of the HI 9829 or a PC. When it is time to retrieve the results the measurement data can be easily transferred to the meters or PC using HI 929829 software.

Sensors

Sensor replacement is quick and easy with screw type connectors and color coded sensors. The HI 9829 automatically recognizes sensor presence.

The HI 7609829-2 galvanic DO sensor with its fast response time can be ready at a moment’s notice. This probe features a replaceable membrane cap for easy maintenance.

The HI 7609829-3 4-electrode conductivity probe uses a polarographic measurement principle and ensures stable conductivity readings that are immune to polarization or surface coating. Absolute conductivity, temperature compensated conductivity, salinity, specific gravity and TDS determinations are possible with measurements from this sensor.

The new HI 7609829-4 EC/turbidity sensor is field replaceable and offers readings from both parameters at the same time.

All potentiometric sensors feature a double junction design and are gel filled to increase resistance to contamination. An ISE sensor can be used in place of the pH sensor and is automatically recognized. pH in mV readings are also displayed —ideal for troubleshooting.

A Great Combination

The use of HANNA’s microprocessor based multiparameter intelligent probes with HI 9829 meter will provide reliable data collection that can lead to an improved scientific understanding of the interconnections between natural, chemical and geological processes and man made pollution to effectively evaluate applications for waste-discharge permits, remediate contaminated sites and to protect or restore biological resources.

The HI 76x9829 probes utilize field replaceable sensors with auto-recognition. The sensors are housed with the probe electronics in a rugged housing with a water-tight cable connection. The base probe model permits the measurement of conductivity, pH/ORP (or an ISE), and dissolved oxygen. Other models permit turbidity and logging.

The probes are available with a choice of cable lengths such as 4 m and 10 m and 20 m (13, 33’) that utilize a DIN connection to interface with the meters. The probes are supplied with a maintenance kit in the carrying case versions. These new probes can be connected directly to a PC with the HI 96982910 USB adapter, and the HI 929829 PC software to communicate directly with the probes.

Reliable temperature measurements are a critical parameter of aquatic system monitoring. Temperature and temperature changes due to water releases can affect the ability of water to hold oxygen as well as the ability of organisms to resist certain pollutants. The intelligent probes incorporate an accurate thermistor that changes predictably with temperature changes. Accurate temperature reading in degrees Celsius, Kelvin or Fahrenheit are displayed and utilized by other detectors for temperature correction.

The pH or pH/ORP sensors incorporate the technology that has made HANNA so successful as a pH manufacturer. Reliable pH measurements are one of the most important indicators of water chemistry indicating the relative amount of free hydrogen and hydroxyl ions in the water. HANNA’s pH sensors utilize a resilient PEI body to protect them from solid particulates found water samples. Consistency and quality are the hallmarks of these sensors. Our differential measurement system further enhances the measurement reliability providing temperature corrected pH.

A choice of 3 ion selective electrodes is available for constant reporting of common surface water contaminants. Nitrate, ammonium and chloride are available. Each ISE is a combination electrode incorporating an extremely constant reference spiral; all potentionmetric probes feature a double junction and solid gelled reference design. By utilizing conductivity, the HI 9829 can convert ion activity measurements to concentration units.

The HANNA 4-electrode conductivity probe using the polarographic measurement principal ensures stable conductivity readings. Electrolytic conductivity measures of the ability of water to conduct an electrical current. It is highly dependent on the amount of dissolved solids (such as salt) in the water. Absolute conductivity, temperature corrected conductivity, salinity, specific gravity and water hardness (TDS) determinations are possible with measurements from this sensor.

The oxygen dissolved in lakes, rivers, and oceans is crucial for the organisms and creatures living in it. If dissolved oxygen concentrations drop below normal levels in water bodies, the water quality degrades and the organisms begin to die off. The galvanic sensor does not require long polarization times so is ready for measurement at a moment’s notice. Our sensor also utilizes a replaceable cap design for ease of maintenance and a safe non-toxic electrolyte. DO readings are compensated for the effects of temperature (using the probes built-in temperature sensor) and atmospheric pressure (using the HI 9829’s internal atmospheric pressure sensor).

The new HANNA turbidity sensor is a replaceable design for instantaneous turbidity reading that conforms to ISO 7027 standards. It provides measurements from 0.0 to 50.0 FNU; and 50 to 1000 FNU. Turbidity is the amount of particulate matter that is suspended in water. Turbidity measures the scattering effect that suspended solids have on light: the higher the intensity of scattered light, the higher the turbidity. Material that causes water to be turbid include: clay, silt, finely divided organic and inorganic matter, soluble colored organic compounds, plankton and microscopic organisms.

Probes with the logging function have a logging memory that allows storage of up to 140,000 individual samples or 12,000 complete sample data sets with date and time stamp thus permitting up to a 35 day deployment with all channels logging at 10 minute intervals. Logging probes work with either rechargeable or standard batteries.

The probe incorporates a temperature sensor for temperature compensation of all parameters.

Monitoring and Tracking

When data collection or monitoring requires tracking capabilities, two kinds of methods can be included with the data—timestamp and location. The timestamp expresses the date and the time when the measurement was taken. The time and date (timestamp) are determined by the internal real time clock of the HI 9829. As for location of measurement, the HI 9829 offers the FastTracker™ Tag ID system using ID encoded TAGs mounted at the location sites. Users simply touch the TAG receiver to the mounted TAG to store data along with location ID.

Fast Tracker™—Tag Identification System

HANNA’s Fact Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user-entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

iButton® Tags are Easy to Install

Install the optional TAGs near your sampling points for quick and easy iButton® readings. Each TAG contains a computer chip with a unique identification code encased in stainless steel. You can install a practically unlimited amount of TAGs. Additional TAGs can be ordered for all of your traceability requirements.

• Field replaceable ISO 7027 compliant turbidity sensor
• Ammonium, chloride and nitrate ISE’s
• Logging from probe or meter
• Fully customizable instrument, probe, sensors and measurement specifications
• Display from 1 to 12 parameters with font dimension adjustment
• Field replaceable sensors
• pH/ORP or pH, four electrode EC and galvanic DO sensors
• Auto-recognition of all sensors
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes
• Fast Tracker™—Tag I.D. System simplifies periodic monitoring
• Features a built-in barometer for DO compensation
• Quick or independent sensor calibration feature
• Measurement check eliminates erroneous readings
• Logged data can be displayed as graphs
• Graphic LCD with backlight
• USB for PC connectivity
• Good Laboratory Practice feature with last five calibrations recorded
• Meter accepts both alkaline and rechargeable batteries
• Waterproof protection for meter (IP67) and probes (IP 68)

METER ONLY, CARTON BOX PACKAGING

HI 9829-01 Meter only, charging adapter and instruction manual, 115VAC
HI 9829-02 Meter only, charging adapter and instruction manual, 230VAC

METER AND PROBE ONLY, NO SENSORS, CARRYING CASE PACKAGING

HI 98291-01 HI 9829 and HI 7629829/4 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98291-02 HI 9829 and HI 7629829/4 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98292-01 HI 9829 and HI 7639829/4 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98292-02 HI 9829 and HI 7639829/4 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98293-01 HI 9829 and HI 7629829/10 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98293-02 HI 9829 and HI 7629829/10 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98294-01 HI 9829 and HI 7639829/10 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98294-02 HI 9829 and HI 7639829/10 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC

Order Information:

Sensors for all meter and probe configurations are sold separately, see configurations up above.

HI98292-02LT Multiparameter Meter with HI 7639829/4 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC by Hanna Instruments

Rugged, waterproof and easy to use, the HI 9829 is the ideal meters for field measurements of lakes, rivers and seas. Both meters display 1 to 12 parameters simultaneously from up to 15 user selectable parameters.

Combined with one of the HI 76x9829 series probes, the HI 9829 can measure water quality parameters such as pH, ORP, conductivity, turbidity, temperature, ions ions ammonium, nitrate, chloride (NH4+, NO3-—N or Cl-), dissolved oxygen concentration, resistivity, TDS, salinity, and seawater specific gravity. Atmospheric pressure is measured for DO compensation.

This meter features a graphic, backlit LCD that scales digits to fit up to 12 parameters and allows full configuration of each parameter measured along with an on-screen graphing capability.

HI 9829 incorporates comprehensive GLP features and the transferring of data via USB connection. The HI 98290’s HELP key displays context sensitive help. The alpha-numeric keypad offers a user friendly way to complete the input fields.

The Perfect Monitoring Tool

Water scientists and managers alike utilize data-collection programs as part of environmental monitoring. These programs are designed to reveal changes in water and the environment around it over time. Reliable, dependable measurements are required to monitor these changes and understand the contributions from seasonal fluctuations, weathering, as well as manmade pollution. The HI 7629829 or HI 7639829 intelligent autonomously logging probes can be left at the application site to autonomously log results without the aid of the HI 9829 or a PC. When it is time to retrieve the results the measurement data can be easily transferred to the meters or PC using HI 929829 software.

Sensors

Sensor replacement is quick and easy with screw type connectors and color coded sensors. The HI 9829 automatically recognizes sensor presence.

The HI 7609829-2 galvanic DO sensor with its fast response time can be ready at a moment’s notice. This probe features a replaceable membrane cap for easy maintenance.

The HI 7609829-3 4-electrode conductivity probe uses a polarographic measurement principle and ensures stable conductivity readings that are immune to polarization or surface coating. Absolute conductivity, temperature compensated conductivity, salinity, specific gravity and TDS determinations are possible with measurements from this sensor.

The new HI 7609829-4 EC/turbidity sensor is field replaceable and offers readings from both parameters at the same time.

All potentiometric sensors feature a double junction design and are gel filled to increase resistance to contamination. An ISE sensor can be used in place of the pH sensor and is automatically recognized. pH in mV readings are also displayed —ideal for troubleshooting.

A Great Combination

The use of HANNA’s microprocessor based multiparameter intelligent probes with HI 9829 meter will provide reliable data collection that can lead to an improved scientific understanding of the interconnections between natural, chemical and geological processes and man made pollution to effectively evaluate applications for waste-discharge permits, remediate contaminated sites and to protect or restore biological resources.

The HI 76x9829 probes utilize field replaceable sensors with auto-recognition. The sensors are housed with the probe electronics in a rugged housing with a water-tight cable connection. The base probe model permits the measurement of conductivity, pH/ORP (or an ISE), and dissolved oxygen. Other models permit turbidity and logging.

The probes are available with a choice of cable lengths such as 4 m and 10 m and 20 m (13, 33’) that utilize a DIN connection to interface with the meters. The probes are supplied with a maintenance kit in the carrying case versions. These new probes can be connected directly to a PC with the HI 96982910 USB adapter, and the HI 929829 PC software to communicate directly with the probes.

Reliable temperature measurements are a critical parameter of aquatic system monitoring. Temperature and temperature changes due to water releases can affect the ability of water to hold oxygen as well as the ability of organisms to resist certain pollutants. The intelligent probes incorporate an accurate thermistor that changes predictably with temperature changes. Accurate temperature reading in degrees Celsius, Kelvin or Fahrenheit are displayed and utilized by other detectors for temperature correction.

The pH or pH/ORP sensors incorporate the technology that has made HANNA so successful as a pH manufacturer. Reliable pH measurements are one of the most important indicators of water chemistry indicating the relative amount of free hydrogen and hydroxyl ions in the water. HANNA’s pH sensors utilize a resilient PEI body to protect them from solid particulates found water samples. Consistency and quality are the hallmarks of these sensors. Our differential measurement system further enhances the measurement reliability providing temperature corrected pH.

A choice of 3 ion selective electrodes is available for constant reporting of common surface water contaminants. Nitrate, ammonium and chloride are available. Each ISE is a combination electrode incorporating an extremely constant reference spiral; all potentionmetric probes feature a double junction and solid gelled reference design. By utilizing conductivity, the HI 9829 can convert ion activity measurements to concentration units.

The HANNA 4-electrode conductivity probe using the polarographic measurement principal ensures stable conductivity readings. Electrolytic conductivity measures of the ability of water to conduct an electrical current. It is highly dependent on the amount of dissolved solids (such as salt) in the water. Absolute conductivity, temperature corrected conductivity, salinity, specific gravity and water hardness (TDS) determinations are possible with measurements from this sensor.

The oxygen dissolved in lakes, rivers, and oceans is crucial for the organisms and creatures living in it. If dissolved oxygen concentrations drop below normal levels in water bodies, the water quality degrades and the organisms begin to die off. The galvanic sensor does not require long polarization times so is ready for measurement at a moment’s notice. Our sensor also utilizes a replaceable cap design for ease of maintenance and a safe non-toxic electrolyte. DO readings are compensated for the effects of temperature (using the probes built-in temperature sensor) and atmospheric pressure (using the HI 9829’s internal atmospheric pressure sensor).

The new HANNA turbidity sensor is a replaceable design for instantaneous turbidity reading that conforms to ISO 7027 standards. It provides measurements from 0.0 to 50.0 FNU; and 50 to 1000 FNU. Turbidity is the amount of particulate matter that is suspended in water. Turbidity measures the scattering effect that suspended solids have on light: the higher the intensity of scattered light, the higher the turbidity. Material that causes water to be turbid include: clay, silt, finely divided organic and inorganic matter, soluble colored organic compounds, plankton and microscopic organisms.

Probes with the logging function have a logging memory that allows storage of up to 140,000 individual samples or 12,000 complete sample data sets with date and time stamp thus permitting up to a 35 day deployment with all channels logging at 10 minute intervals. Logging probes work with either rechargeable or standard batteries.

The probe incorporates a temperature sensor for temperature compensation of all parameters.

Monitoring and Tracking

When data collection or monitoring requires tracking capabilities, two kinds of methods can be included with the data—timestamp and location. The timestamp expresses the date and the time when the measurement was taken. The time and date (timestamp) are determined by the internal real time clock of the HI 9829. As for location of measurement, the HI 9829 offers the FastTracker™ Tag ID system using ID encoded TAGs mounted at the location sites. Users simply touch the TAG receiver to the mounted TAG to store data along with location ID.

Fast Tracker™—Tag Identification System

HANNA’s Fact Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user-entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.

iButton® Tags are Easy to Install

Install the optional TAGs near your sampling points for quick and easy iButton® readings. Each TAG contains a computer chip with a unique identification code encased in stainless steel. You can install a practically unlimited amount of TAGs. Additional TAGs can be ordered for all of your traceability requirements.

• Field replaceable ISO 7027 compliant turbidity sensor
• Ammonium, chloride and nitrate ISE’s
• Logging from probe or meter
• Fully customizable instrument, probe, sensors and measurement specifications
• Display from 1 to 12 parameters with font dimension adjustment
• Field replaceable sensors
• pH/ORP or pH, four electrode EC and galvanic DO sensors
• Auto-recognition of all sensors
• Rugged probe with stainless steel tip has a diameter under 2” for wells and pipes
• Fast Tracker™—Tag I.D. System simplifies periodic monitoring
• Features a built-in barometer for DO compensation
• Quick or independent sensor calibration feature
• Measurement check eliminates erroneous readings
• Logged data can be displayed as graphs
• Graphic LCD with backlight
• USB for PC connectivity
• Good Laboratory Practice feature with last five calibrations recorded
• Meter accepts both alkaline and rechargeable batteries
• Waterproof protection for meter (IP67) and probes (IP 68)

METER ONLY, CARTON BOX PACKAGING

HI 9829-01 Meter only, charging adapter and instruction manual, 115VAC
HI 9829-02 Meter only, charging adapter and instruction manual, 230VAC

METER AND PROBE ONLY, NO SENSORS, CARRYING CASE PACKAGING

HI 98291-01 HI 9829 and HI 7629829/4 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98291-02 HI 9829 and HI 7629829/4 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98292-01 HI 9829 and HI 7639829/4 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98292-02 HI 9829 and HI 7639829/4 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 4 m (13.1’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98293-01 HI 9829 and HI 7629829/10 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98293-02 HI 9829 and HI 7629829/10 logging probe for pH/pH+ORP/ISE, DO, EC, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC
HI 98294-01 HI 9829 and HI 7639829/10 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 115VAC
HI 98294-02 HI 9829 and HI 7639829/10 logging probe for pH/pH+ORP/ISE, DO, EC+turbidity, temperature, with 10 m (33’) cable, probe maintenance kit, charging adapter, instruction manual and hard carrying case, 230VAC