Temperature Dataloggers

HI140AH Temperature Datalogger with Hook, (-30.0 to 70.0°C) Range by Hanna Instruments

HI 140 loggers are not much larger than a PC mouse. They are housed in a smooth, yet tough ABS casing that is sealed against ingress of dust and water.

These dataloggers represent the most economical and secure way of monitoring temperature continuously over long periods of time. They can be placed with goods on the move, on supermarket shelves and in warehouses. They record the temperature at a given interval to make sure that perishable goods are not left unattended such as on a loading dock on the other side of the world! For instance, users can check if fresh fish remained at unacceptable temperatures and for how long! They can provide that extra guarantee that goods never ventured out of limits of public safety.

HI 140 models feature different temperature ranges to make them more accurate for your specific needs. A green LED on the front of the meter notifies users of the logging status, while a red LED serves as an alarm indication when undesired temperatures have been encountered.

HI 140 can store up to 7600 measurements at selectable intervals from 1 minute to 24 hours. All parameters can be set through our Windows® compatible software. An infrared cradle eliminates the need to put a connector on the meter - an undesirable dirt-trap in the food market and source of problems due to wear and tear over time.

Logged data can be transferred to a PC by simply placing the instrument on the HI 90140 interface and running the HI 92140 software. Users need just one interface connected to the PC to handle all HANNA dataloggers, each identified by a unique ID code.

The instruments are equipped with BEPS (Battery Error Prevention System) which alerts the user in the event that low battery power could adversely affect readings.

• LED indicators
• Store up to 7600 temperatures
• Remotely controlled form the PC
• BEPS (Battery Error Protection System)

Order Information:

All HI 140 models are supplied with batteries and instructions.

HI140BH Temperature Datalogger with Hook, (-10.0 to 30.0°C) Range by Hanna Instruments

HI 140 loggers are not much larger than a PC mouse. They are housed in a smooth, yet tough ABS casing that is sealed against ingress of dust and water.

These dataloggers represent the most economical and secure way of monitoring temperature continuously over long periods of time. They can be placed with goods on the move, on supermarket shelves and in warehouses. They record the temperature at a given interval to make sure that perishable goods are not left unattended such as on a loading dock on the other side of the world! For instance, users can check if fresh fish remained at unacceptable temperatures and for how long! They can provide that extra guarantee that goods never ventured out of limits of public safety.

HI 140 models feature different temperature ranges to make them more accurate for your specific needs. A green LED on the front of the meter notifies users of the logging status, while a red LED serves as an alarm indication when undesired temperatures have been encountered.

HI 140 can store up to 7600 measurements at selectable intervals from 1 minute to 24 hours. All parameters can be set through our Windows® compatible software. An infrared cradle eliminates the need to put a connector on the meter - an undesirable dirt-trap in the food market and source of problems due to wear and tear over time.

Logged data can be transferred to a PC by simply placing the instrument on the HI 90140 interface and running the HI 92140 software. Users need just one interface connected to the PC to handle all HANNA dataloggers, each identified by a unique ID code.

The instruments are equipped with BEPS (Battery Error Prevention System) which alerts the user in the event that low battery power could adversely affect readings.

• LED indicators
• Store up to 7600 temperatures
• Remotely controlled form the PC
• BEPS (Battery Error Protection System)

Order Information:

All HI 140 models are supplied with batteries and instructions.

HI140CH Temperature Datalogger with Hook, (-30.0 to 10.0°C) Range by Hanna Instruments

HI 140 loggers are not much larger than a PC mouse. They are housed in a smooth, yet tough ABS casing that is sealed against ingress of dust and water.

These dataloggers represent the most economical and secure way of monitoring temperature continuously over long periods of time. They can be placed with goods on the move, on supermarket shelves and in warehouses. They record the temperature at a given interval to make sure that perishable goods are not left unattended such as on a loading dock on the other side of the world! For instance, users can check if fresh fish remained at unacceptable temperatures and for how long! They can provide that extra guarantee that goods never ventured out of limits of public safety.

HI 140 models feature different temperature ranges to make them more accurate for your specific needs. A green LED on the front of the meter notifies users of the logging status, while a red LED serves as an alarm indication when undesired temperatures have been encountered.

HI 140 can store up to 7600 measurements at selectable intervals from 1 minute to 24 hours. All parameters can be set through our Windows® compatible software. An infrared cradle eliminates the need to put a connector on the meter - an undesirable dirt-trap in the food market and source of problems due to wear and tear over time.

Logged data can be transferred to a PC by simply placing the instrument on the HI 90140 interface and running the HI 92140 software. Users need just one interface connected to the PC to handle all HANNA dataloggers, each identified by a unique ID code.

The instruments are equipped with BEPS (Battery Error Prevention System) which alerts the user in the event that low battery power could adversely affect readings.

• LED indicators
• Store up to 7600 temperatures
• Remotely controlled form the PC
• BEPS (Battery Error Protection System)

Order Information:

All HI 140 models are supplied with batteries and instructions.

HI140DH Temperature Datalogger with Hook, (20.0 to 60.0°C) Range by Hanna Instruments

HI 140 loggers are not much larger than a PC mouse. They are housed in a smooth, yet tough ABS casing that is sealed against ingress of dust and water.

These dataloggers represent the most economical and secure way of monitoring temperature continuously over long periods of time. They can be placed with goods on the move, on supermarket shelves and in warehouses. They record the temperature at a given interval to make sure that perishable goods are not left unattended such as on a loading dock on the other side of the world! For instance, users can check if fresh fish remained at unacceptable temperatures and for how long! They can provide that extra guarantee that goods never ventured out of limits of public safety.

HI 140 models feature different temperature ranges to make them more accurate for your specific needs. A green LED on the front of the meter notifies users of the logging status, while a red LED serves as an alarm indication when undesired temperatures have been encountered.

HI 140 can store up to 7600 measurements at selectable intervals from 1 minute to 24 hours. All parameters can be set through our Windows® compatible software. An infrared cradle eliminates the need to put a connector on the meter - an undesirable dirt-trap in the food market and source of problems due to wear and tear over time.

Logged data can be transferred to a PC by simply placing the instrument on the HI 90140 interface and running the HI 92140 software. Users need just one interface connected to the PC to handle all HANNA dataloggers, each identified by a unique ID code.

The instruments are equipped with BEPS (Battery Error Prevention System) which alerts the user in the event that low battery power could adversely affect readings.

• LED indicators
• Store up to 7600 temperatures
• Remotely controlled form the PC
• BEPS (Battery Error Protection System)

Order Information:

All HI 140 models are supplied with batteries and instructions.

HI140GH Temperature Datalogger with Hook, (-5.0 to 15.0°C) Range by Hanna Instruments

HI 140 loggers are not much larger than a PC mouse. They are housed in a smooth, yet tough ABS casing that is sealed against ingress of dust and water.

These dataloggers represent the most economical and secure way of monitoring temperature continuously over long periods of time. They can be placed with goods on the move, on supermarket shelves and in warehouses. They record the temperature at a given interval to make sure that perishable goods are not left unattended such as on a loading dock on the other side of the world! For instance, users can check if fresh fish remained at unacceptable temperatures and for how long! They can provide that extra guarantee that goods never ventured out of limits of public safety.

HI 140 models feature different temperature ranges to make them more accurate for your specific needs. A green LED on the front of the meter notifies users of the logging status, while a red LED serves as an alarm indication when undesired temperatures have been encountered.

HI 140 can store up to 7600 measurements at selectable intervals from 1 minute to 24 hours. All parameters can be set through our Windows® compatible software. An infrared cradle eliminates the need to put a connector on the meter - an undesirable dirt-trap in the food market and source of problems due to wear and tear over time.

Logged data can be transferred to a PC by simply placing the instrument on the HI 90140 interface and running the HI 92140 software. Users need just one interface connected to the PC to handle all HANNA dataloggers, each identified by a unique ID code.

The instruments are equipped with BEPS (Battery Error Prevention System) which alerts the user in the event that low battery power could adversely affect readings.

• LED indicators
• Store up to 7600 temperatures
• Remotely controlled form the PC
• BEPS (Battery Error Protection System)

Order Information:

All HI 140 models are supplied with batteries and instructions.

HI140HH Temperature Datalogger with Hook, (10 to 120°C) Range by Hanna Instruments

HI 140 loggers are not much larger than a PC mouse. They are housed in a smooth, yet tough ABS casing that is sealed against ingress of dust and water.

These dataloggers represent the most economical and secure way of monitoring temperature continuously over long periods of time. They can be placed with goods on the move, on supermarket shelves and in warehouses. They record the temperature at a given interval to make sure that perishable goods are not left unattended such as on a loading dock on the other side of the world! For instance, users can check if fresh fish remained at unacceptable temperatures and for how long! They can provide that extra guarantee that goods never ventured out of limits of public safety.

HI 140 models feature different temperature ranges to make them more accurate for your specific needs. A green LED on the front of the meter notifies users of the logging status, while a red LED serves as an alarm indication when undesired temperatures have been encountered.

HI 140 can store up to 7600 measurements at selectable intervals from 1 minute to 24 hours. All parameters can be set through our Windows® compatible software. An infrared cradle eliminates the need to put a connector on the meter - an undesirable dirt-trap in the food market and source of problems due to wear and tear over time.

Logged data can be transferred to a PC by simply placing the instrument on the HI 90140 interface and running the HI 92140 software. Users need just one interface connected to the PC to handle all HANNA dataloggers, each identified by a unique ID code.

The instruments are equipped with BEPS (Battery Error Prevention System) which alerts the user in the event that low battery power could adversely affect readings.

• LED indicators
• Store up to 7600 temperatures
• Remotely controlled form the PC
• BEPS (Battery Error Protection System)

Order Information:

All HI 140 models are supplied with batteries and instructions.

HI141AH NTC Thermologger with Hook, (-40.0 to 80.0 C) Range, Internal by Hanna Instruments

The HI 141 series is a family of temperature dataloggers with either one or two channels, internal or external temperature sensors, and an optional LCD. External temperature sensor models feature one or two stainless steel sensors on a 1 m (3.3') cable for direct insertion. HI 141 can store up to 16,000 temperature samples in a protected, non-volatile EEPROM memory. The logging interval can be set from once per second to once per 24 hour period, and logging delay can be set anywhere up to 199 hours. The MIN or MAX temperature between logging intervals can also be stored. All of your collected data is tamper-proof and stored into serial numbered lots.

The HI 141000 Windows® compatible software supports communication between the logger and the PC through the HI 141001 infrared transmitter.

The waterproof housing can include a convenient hanging hook (simply add an "H" to the end of the code). For a typical 1 minute logging interval, the battery will last about 4 years.

• 1 or 2 channels with internal or external sensor
• With or without LCD
• 16,000 samples/channel (1-channel models) or 8,000 samples/channel (2-channel models)
• Logging interval from 1 second to 24 hours
• Logging delay start up to 199 hours and magnetic start
• Programmable high and low alarms
• Non-volatile storage of logging
• Waterproof casing
• BEPS (Battery Error Protection System)

Order Information:

All HI 141 models are supplied with 3.6V Lithium AA battery, magnetic key and instructions.

HI141BH NTC Thermologger with Hook, (-40.0 to 125.0 C) Range, External by Hanna Instruments

The HI 141 series is a family of temperature dataloggers with either one or two channels, internal or external temperature sensors, and an optional LCD. External temperature sensor models feature one or two stainless steel sensors on a 1 m (3.3') cable for direct insertion. HI 141 can store up to 16,000 temperature samples in a protected, non-volatile EEPROM memory. The logging interval can be set from once per second to once per 24 hour period, and logging delay can be set anywhere up to 199 hours. The MIN or MAX temperature between logging intervals can also be stored. All of your collected data is tamper-proof and stored into serial numbered lots.

The HI 141000 Windows® compatible software supports communication between the logger and the PC through the HI 141001 infrared transmitter.

The waterproof housing can include a convenient hanging hook (simply add an "H" to the end of the code). For a typical 1 minute logging interval, the battery will last about 4 years.

• 1 or 2 channels with internal or external sensor
• With or without LCD
• 16,000 samples/channel (1-channel models) or 8,000 samples/channel (2-channel models)
• Logging interval from 1 second to 24 hours
• Logging delay start up to 199 hours and magnetic start
• Programmable high and low alarms
• Non-volatile storage of logging
• Waterproof casing
• BEPS (Battery Error Protection System)

Order Information:

All HI 141 models are supplied with 3.6V Lithium AA battery, magnetic key and instructions.

HI141CH NTC Thermologger, with Hook, (-20.0 to 70.0 C) Range, Internal by Hanna Instruments

The HI 141 series is a family of temperature dataloggers with either one or two channels, internal or external temperature sensors, and an optional LCD. External temperature sensor models feature one or two stainless steel sensors on a 1 m (3.3') cable for direct insertion. HI 141 can store up to 16,000 temperature samples in a protected, non-volatile EEPROM memory. The logging interval can be set from once per second to once per 24 hour period, and logging delay can be set anywhere up to 199 hours. The MIN or MAX temperature between logging intervals can also be stored. All of your collected data is tamper-proof and stored into serial numbered lots.

The HI 141000 Windows® compatible software supports communication between the logger and the PC through the HI 141001 infrared transmitter.

The waterproof housing can include a convenient hanging hook (simply add an "H" to the end of the code). For a typical 1 minute logging interval, the battery will last about 4 years.

• 1 or 2 channels with internal or external sensor
• With or without LCD
• 16,000 samples/channel (1-channel models) or 8,000 samples/channel (2-channel models)
• Logging interval from 1 second to 24 hours
• Logging delay start up to 199 hours and magnetic start
• Programmable high and low alarms
• Non-volatile storage of logging
• Waterproof casing
• BEPS (Battery Error Protection System)

Order Information:

All HI 141 models are supplied with 3.6V Lithium AA battery, magnetic key and instructions.

HI141DH NTC Thermologger with Hook, (-40.0 to 125.0 C) Range, External by Hanna Instruments

The HI 141 series is a family of temperature dataloggers with either one or two channels, internal or external temperature sensors, and an optional LCD. External temperature sensor models feature one or two stainless steel sensors on a 1 m (3.3') cable for direct insertion. HI 141 can store up to 16,000 temperature samples in a protected, non-volatile EEPROM memory. The logging interval can be set from once per second to once per 24 hour period, and logging delay can be set anywhere up to 199 hours. The MIN or MAX temperature between logging intervals can also be stored. All of your collected data is tamper-proof and stored into serial numbered lots.

The HI 141000 Windows® compatible software supports communication between the logger and the PC through the HI 141001 infrared transmitter.

The waterproof housing can include a convenient hanging hook (simply add an "H" to the end of the code). For a typical 1 minute logging interval, the battery will last about 4 years.

• 1 or 2 channels with internal or external sensor
• With or without LCD
• 16,000 samples/channel (1-channel models) or 8,000 samples/channel (2-channel models)
• Logging interval from 1 second to 24 hours
• Logging delay start up to 199 hours and magnetic start
• Programmable high and low alarms
• Non-volatile storage of logging
• Waterproof casing
• BEPS (Battery Error Protection System)

Order Information:

All HI 141 models are supplied with 3.6V Lithium AA battery, magnetic key and instructions.

HI141EH NTC Thermologger with Hook, Internal (-40.0 to 80.0°C), External (-40.0 to 125.0°C) by Hanna Instruments

The HI 141 series is a family of temperature dataloggers with either one or two channels, internal or external temperature sensors, and an optional LCD. External temperature sensor models feature one or two stainless steel sensors on a 1 m (3.3') cable for direct insertion. HI 141 can store up to 16,000 temperature samples in a protected, non-volatile EEPROM memory. The logging interval can be set from once per second to once per 24 hour period, and logging delay can be set anywhere up to 199 hours. The MIN or MAX temperature between logging intervals can also be stored. All of your collected data is tamper-proof and stored into serial numbered lots.

The HI 141000 Windows® compatible software supports communication between the logger and the PC through the HI 141001 infrared transmitter.

The waterproof housing can include a convenient hanging hook (simply add an "H" to the end of the code). For a typical 1 minute logging interval, the battery will last about 4 years.

• 1 or 2 channels with internal or external sensor
• With or without LCD
• 16,000 samples/channel (1-channel models) or 8,000 samples/channel (2-channel models)
• Logging interval from 1 second to 24 hours
• Logging delay start up to 199 hours and magnetic start
• Programmable high and low alarms
• Non-volatile storage of logging
• Waterproof casing
• BEPS (Battery Error Protection System)

Order Information:

All HI 141 models are supplied with 3.6V Lithium AA battery, magnetic key and instructions.

HI141FH NTC thermologger with hook, 2 external (-40.0 to 125.0 C) by Hanna Instruments

The HI 141 series is a family of temperature dataloggers with either one or two channels, internal or external temperature sensors, and an optional LCD. External temperature sensor models feature one or two stainless steel sensors on a 1 m (3.3') cable for direct insertion. HI 141 can store up to 16,000 temperature samples in a protected, non-volatile EEPROM memory. The logging interval can be set from once per second to once per 24 hour period, and logging delay can be set anywhere up to 199 hours. The MIN or MAX temperature between logging intervals can also be stored. All of your collected data is tamper-proof and stored into serial numbered lots.

The HI 141000 Windows® compatible software supports communication between the logger and the PC through the HI 141001 infrared transmitter.

The waterproof housing can include a convenient hanging hook (simply add an "H" to the end of the code). For a typical 1 minute logging interval, the battery will last about 4 years.

• 1 or 2 channels with internal or external sensor
• With or without LCD
• 16,000 samples/channel (1-channel models) or 8,000 samples/channel (2-channel models)
• Logging interval from 1 second to 24 hours
• Logging delay start up to 199 hours and magnetic start
• Programmable high and low alarms
• Non-volatile storage of logging
• Waterproof casing
• BEPS (Battery Error Protection System)

Order Information:

All HI 141 models are supplied with 3.6V Lithium AA battery, magnetic key and instructions.

HI141GH NTC Thermologger with Hook, Internal (-20.0 to 70.0 C) External (-40.0 to 125.0°C) by Hanna Instruments

The HI 141 series is a family of temperature dataloggers with either one or two channels, internal or external temperature sensors, and an optional LCD. External temperature sensor models feature one or two stainless steel sensors on a 1 m (3.3') cable for direct insertion. HI 141 can store up to 16,000 temperature samples in a protected, non-volatile EEPROM memory. The logging interval can be set from once per second to once per 24 hour period, and logging delay can be set anywhere up to 199 hours. The MIN or MAX temperature between logging intervals can also be stored. All of your collected data is tamper-proof and stored into serial numbered lots.

The HI 141000 Windows® compatible software supports communication between the logger and the PC through the HI 141001 infrared transmitter.

The waterproof housing can include a convenient hanging hook (simply add an "H" to the end of the code). For a typical 1 minute logging interval, the battery will last about 4 years.

• 1 or 2 channels with internal or external sensor
• With or without LCD
• 16,000 samples/channel (1-channel models) or 8,000 samples/channel (2-channel models)
• Logging interval from 1 second to 24 hours
• Logging delay start up to 199 hours and magnetic start
• Programmable high and low alarms
• Non-volatile storage of logging
• Waterproof casing
• BEPS (Battery Error Protection System)

Order Information:

All HI 141 models are supplied with 3.6V Lithium AA battery, magnetic key and instructions.

HI141JH NNTC Thermologger, 2 External (-40.0 to 125.0) by Hanna Instruments

The HI 141 series is a family of temperature dataloggers with either one or two channels, internal or external temperature sensors, and an optional LCD. External temperature sensor models feature one or two stainless steel sensors on a 1 m (3.3') cable for direct insertion. HI 141 can store up to 16,000 temperature samples in a protected, non-volatile EEPROM memory. The logging interval can be set from once per second to once per 24 hour period, and logging delay can be set anywhere up to 199 hours. The MIN or MAX temperature between logging intervals can also be stored. All of your collected data is tamper-proof and stored into serial numbered lots.

The HI 141000 Windows® compatible software supports communication between the logger and the PC through the HI 141001 infrared transmitter.

The waterproof housing can include a convenient hanging hook (simply add an "H" to the end of the code). For a typical 1 minute logging interval, the battery will last about 4 years.

• 1 or 2 channels with internal or external sensor
• With or without LCD
• 16,000 samples/channel (1-channel models) or 8,000 samples/channel (2-channel models)
• Logging interval from 1 second to 24 hours
• Logging delay start up to 199 hours and magnetic start
• Programmable high and low alarms
• Non-volatile storage of logging
• Waterproof casing
• BEPS (Battery Error Protection System)

Order Information:

All HI 141 models are supplied with 3.6V Lithium AA battery, magnetic key and instructions.

HI143 T-Logger with Locking Wall Cradle by Hanna Instruments

HI 143 is a temperature data logger with internal NTC sensor. The HI 143 is controlled via USB or RS232 on a PC with HANNA’s Windows® compatible application software. Communication is made between the logger and the PC through the HI 143001 transmitter with RS232 or HI 143002 with USB connector. The supplied wall cradle makes it easy to lock the meter in place to prevent tampering and the application software supports security passwords.

• Logging start through PC by pressing a button or at a set time
• Selectable sampling interval from 1 minute to 24 hours
• Up to 4,000 logged samples
• Selectable measurement unit, °C or °F
• Min/Max measured values are stored and displayed
• Programmable high and low alarms
• Non-volatile storage of logging parameters and data
• Battery level indicator on display
• Security password
• Waterproof protection

Order Information:

HI 143 is supplied with CR2032 lithium battery, wall cradle, lock and instructions. HI 143-00 is supplied with HI 143001 RS232 communication cradle, Windows® compatible application software, CR2032 lithium battery, wall cradle, lock and instructions. HI 143-10 is supplied with HI 143002 USB communication cradle, Windows® compatible application software, CR2032 lithium battery, wall cradle, lock and instructions.

HI143-00 T Logger Supplied with HI143001 USB Cradle by Hanna Instruments

HI 143 is a temperature data logger with internal NTC sensor. The HI 143 is controlled via USB or RS232 on a PC with HANNA’s Windows® compatible application software. Communication is made between the logger and the PC through the HI 143001 transmitter with RS232 or HI 143002 with USB connector. The supplied wall cradle makes it easy to lock the meter in place to prevent tampering and the application software supports security passwords.

• Logging start through PC by pressing a button or at a set time
• Selectable sampling interval from 1 minute to 24 hours
• Up to 4,000 logged samples
• Selectable measurement unit, °C or °F
• Min/Max measured values are stored and displayed
• Programmable high and low alarms
• Non-volatile storage of logging parameters and data
• Battery level indicator on display
• Security password
• Waterproof protection

Order Information:

HI 143 is supplied with CR2032 lithium battery, wall cradle, lock and instructions. HI 143-00 is supplied with HI 143001 RS232 communication cradle, Windows® compatible application software, CR2032 lithium battery, wall cradle, lock and instructions. HI 143-10 is supplied with HI 143002 USB communication cradle, Windows® compatible application software, CR2032 lithium battery, wall cradle, lock and instructions.

HI143-10 HI143 Logger with HI143002 USB Cradle by Hanna Instruments

HI 143 is a temperature data logger with internal NTC sensor. The HI 143 is controlled via USB or RS232 on a PC with HANNA’s Windows® compatible application software. Communication is made between the logger and the PC through the HI 143001 transmitter with RS232 or HI 143002 with USB connector. The supplied wall cradle makes it easy to lock the meter in place to prevent tampering and the application software supports security passwords.

• Logging start through PC by pressing a button or at a set time
• Selectable sampling interval from 1 minute to 24 hours
• Up to 4,000 logged samples
• Selectable measurement unit, °C or °F
• Min/Max measured values are stored and displayed
• Programmable high and low alarms
• Non-volatile storage of logging parameters and data
• Battery level indicator on display
• Security password
• Waterproof protection

Order Information:

HI 143 is supplied with CR2032 lithium battery, wall cradle, lock and instructions. HI 143-00 is supplied with HI 143001 RS232 communication cradle, Windows® compatible application software, CR2032 lithium battery, wall cradle, lock and instructions. HI 143-10 is supplied with HI 143002 USB communication cradle, Windows® compatible application software, CR2032 lithium battery, wall cradle, lock and instructions.

Thermologger with Hook, LCD, 2 Exterior Sensors with 2m Cable

Thermologger with Hook, LCD, 2 Exterior Sensors with 5m Cable

NTC Thermologger, LCD, 2 Exterior Sensors, Hook -40.0 to 125.0C