1-866-4 JJSTECH(1-866-455-7832)

Hanna Conductivity Transmitter to use with Four-ring Probe, Range 0.00 to 19.99 mS/cm with LCD - HI8936BLN

Item #:
HI8936BLN
Brand:
Hanna Instruments
Hanna Conductivity Transmitter to use with Four-ring Probe, Range 0.00 to 19.99 mS/cm with LCD - HI8936BLN
$422.00
Qty

Discontinued

Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
Hanna Conductivity Transmitter to use with Four-ring Probe, Range 0.00 to 19.99 mS/cm with LCD - HI8936BLN

Hanna Conductivity Transmitter to use with Four-ring Probe, Range 0.00 to 19.99 mS/cm with LCD - HI8936BLN

$422.00

Discontinued


HI8936BLN Conductivity Transmitter to use with Four-ring Probe, Range 0.00 to 19.99 mS/cm with LCD by Hanna Instruments

HI 8936 is our redesigned conductivity transmitter that utilizes a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. This allows the transmitter to operate at peak performance at all times.

Temperature effects are compensated for by utilizing both the built-in temperature sensor on the probe and the transmitter's ATC circuitry with a ? of 2%/°C.

Direct connection of the probe to the transmitter assures a positive electrical connection with no signal loss over long distances.

HI 8936”L” versions allow easy verification and monitoring of measured values and is easier to calibrate and maintain.

The HI 8936 series requires external power to the 4-20 mA current loop.

  • Utilizes HANNA’s potentiometric four-ring conductivity probe
  • Automatic Temperature Compensation
  • Direct probe connection eliminates signal loss
  • Use in conjunction with HI 7638 or HI 3001 platinum conductivity probes

Order Information:

All HI 8936 models are supplied complete with instructions.

Range 0.00 to 19.99 mS/cm
Resolution 0.01 mS/cm
Accuracy @ 20°C ±2% f.s. (excluding probe error)
Calibration manual, two point, with offset and slope trimmers
Temperature Compensation fixed or automatic from 0 to 50°C (32 to 122°F) with ß=2%/°C
Conductivity Probe HI 7635 for in-line applications (not included)
Recorder Output 4-20 mA, not isolated, max 500 Ohm
Protection IP65
Power Supply 17-36 VDC
Environment 0 to 50°C (32 to 122°F); RH max 95% non-condensing
Dimensions 165 x 110 x 71 mm (6.5 x 4.3 x 2.8’’)
Weight 1 kg (2.2 lb.)

Questions & Answers


There are no questions or answers for this item.