1-866-4 JJSTECH(1-866-455-7832)

  1. Home
  2. Honeywell Analytics
  3. Sensepoint Flammable and Toxic Hazardous Area Approved Gas Detectors
  4. Toxic Sensor

Toxic Sensor

Filter by Category
 
Items per page:
Sort by:
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2S 0-20 ppm Toxic Sensor 3/4NPT - 2106B1700
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2S 0-20 ppm Toxic Sensor 3/4NPT - 2106B1700




    Item #2106B1700
    BrandHoneywell Analytics
    Price: $1,131.00
    Quantity:

    2106B1700 Sensepoint Hazardous Area Approved Gas Detector, H2S 0-20 ppm Toxic Sensor 3/4NPT by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2S 0-50 ppm Toxic Sensor 3/4NPT - 2106B1701
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2S 0-50 ppm Toxic Sensor 3/4NPT - 2106B1701




    Item #2106B1701
    BrandHoneywell Analytics
    Price: $1,212.00
    Quantity:

    2106B1701 Sensepoint Hazardous Area Approved Gas Detector, H2S 0-50 ppm Toxic Sensor 3/4NPT by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2S 0-100 ppm Toxic Sensor 3/4NPT - 2106B1702
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2S 0-100 ppm Toxic Sensor 3/4NPT - 2106B1702




    Item #2106B1702
    BrandHoneywell Analytics
    Price: $1,131.00
    Quantity:

    2106B1702 Sensepoint Hazardous Area Approved Gas Detector, H2S 0-100 ppm Toxic Sensor 3/4NPT by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2S 0-20 ppm Toxic Sensor M20 - 2106B1400
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2S 0-20 ppm Toxic Sensor M20 - 2106B1400




    Item #2106B1400
    BrandHoneywell Analytics
    Price: $1,131.00
    Quantity:

    2106B1400 Sensepoint Hazardous Area Approved Gas Detector, H2S 0-20 ppm Toxic Sensor M20 by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2S 0-50 ppm Toxic Sensor M20 - 2106B1401
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2S 0-50 ppm Toxic Sensor M20 - 2106B1401




    Item #2106B1401
    BrandHoneywell Analytics
    Price: $1,052.00
    Quantity:

    2106B1401 Sensepoint Hazardous Area Approved Gas Detector, H2S 0-50 ppm Toxic Sensor M20 by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2S 0-100 ppm Toxic Sensor M20 - 2106B1402
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2S 0-100 ppm Toxic Sensor M20 - 2106B1402




    Item #2106B1402
    BrandHoneywell Analytics
    Price: $1,052.00
    Quantity:

    2106B1402 Sensepoint Hazardous Area Approved Gas Detector, H2S 0-100 ppm Toxic Sensor M20 by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, CO 0-200 ppm Toxic Sensor 3/4NPT - 2106B1706
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, CO 0-200 ppm Toxic Sensor 3/4NPT - 2106B1706




    Item #2106B1706
    BrandHoneywell Analytics
    Price: $1,131.00
    Quantity:

    2106B1706 Sensepoint Hazardous Area Approved Gas Detector, CO 0-200 ppm Toxic Sensor 3/4NPT by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, CO 0-500 ppm Toxic Sensor 3/4NPT - 2106B1707
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, CO 0-500 ppm Toxic Sensor 3/4NPT - 2106B1707




    Item #2106B1707
    BrandHoneywell Analytics
    Price: $1,131.00
    Quantity:

    2106B1707 Sensepoint Hazardous Area Approved Gas Detector, CO 0-500 ppm Toxic Sensor 3/4NPT by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, CO 0-100 ppm Toxic Sensor M20 - 2106B1405
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, CO 0-100 ppm Toxic Sensor M20 - 2106B1405




    Item #2106B1405
    BrandHoneywell Analytics
    Price: $1,131.00
    Quantity:

    2106B1405 Sensepoint Hazardous Area Approved Gas Detector, CO 0-100 ppm Toxic Sensor M20 by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, CO 0-200 ppm Toxic Sensor M20 - 2106B1406
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, CO 0-200 ppm Toxic Sensor M20 - 2106B1406




    Item #2106B1406
    BrandHoneywell Analytics
    Price: $1,212.00
    Quantity:

    2106B1406 Sensepoint Hazardous Area Approved Gas Detector, CO 0-200 ppm Toxic Sensor M20 by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, CO 0-500 ppm Toxic Sensor M20 - 2106B1407
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, CO 0-500 ppm Toxic Sensor M20 - 2106B1407




    Item #2106B1407
    BrandHoneywell Analytics
    Price: $1,131.00
    Quantity:

    2106B1407 Sensepoint Hazardous Area Approved Gas Detector, CO 0-500 ppm Toxic Sensor M20 by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, Cl2 0-15 ppm Toxic Sensor 3/4NPT - 2106B1711
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, Cl2 0-15 ppm Toxic Sensor 3/4NPT - 2106B1711




    Item #2106B1711
    BrandHoneywell Analytics
    Price: $1,396.00
    Quantity:

    2106B1711 Sensepoint Hazardous Area Approved Gas Detector, Cl2 0-15 ppm Toxic Sensor 3/4NPT by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, Cl2 0-5 ppm Toxic Sensor M20 - 2106B1410
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, Cl2 0-5 ppm Toxic Sensor M20 - 2106B1410




    Item #2106B1410
    BrandHoneywell Analytics
    Price: $1,396.00
    Quantity:

    2106B1410 Sensepoint Hazardous Area Approved Gas Detector, Cl2 0-5 ppm Toxic Sensor M20 by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, Cl2 0-15 ppm Toxic Sensor M20 - 2106B1411
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, Cl2 0-15 ppm Toxic Sensor M20 - 2106B1411




    Item #2106B1411
    BrandHoneywell Analytics
    Price: $1,396.00
    Quantity:

    2106B1411 Sensepoint Hazardous Area Approved Gas Detector, Cl2 0-15 ppm Toxic Sensor M20 by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NH3 0-50 ppm Toxic Sensor 3/4NPT - 2106B1713
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NH3 0-50 ppm Toxic Sensor 3/4NPT - 2106B1713




    Item #2106B1713
    BrandHoneywell Analytics
    Price: $1,212.00
    Quantity:

    2106B1713 Sensepoint Hazardous Area Approved Gas Detector, NH3 0-50 ppm Toxic Sensor 3/4NPT by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NH3 0-1000 ppm Toxic Sensor 3/4NPT - 2106B1714
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NH3 0-1000 ppm Toxic Sensor 3/4NPT - 2106B1714




    Item #2106B1714
    BrandHoneywell Analytics
    Price: $1,131.00
    Quantity:

    2106B1714 Sensepoint Hazardous Area Approved Gas Detector, NH3 0-1000 ppm Toxic Sensor 3/4NPT by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NH3 0-100 ppm Toxic Sensor 3/4NPT - 2106B1715
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NH3 0-100 ppm Toxic Sensor 3/4NPT - 2106B1715




    Item #2106B1715
    BrandHoneywell Analytics
    Price: $1,212.00
    Quantity:

    2106B1715 Sensepoint Hazardous Area Approved Gas Detector, NH3 0-100 ppm Toxic Sensor 3/4NPT by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NH3 0-50 ppm Toxic Sensor M20 - 2106B1413
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NH3 0-50 ppm Toxic Sensor M20 - 2106B1413




    Item #2106B1413
    BrandHoneywell Analytics
    Price: $1,212.00
    Quantity:

    2106B1413 Sensepoint Hazardous Area Approved Gas Detector, NH3 0-50 ppm Toxic Sensor M20 by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NH3 0-1000 ppm Toxic Sensor M20 - 2106B1414
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NH3 0-1000 ppm Toxic Sensor M20 - 2106B1414




    Item #2106B1414
    BrandHoneywell Analytics
    Price: $1,131.00
    Quantity:

    2106B1414 Sensepoint Hazardous Area Approved Gas Detector, NH3 0-1000 ppm Toxic Sensor M20 by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NH3 0-100 ppm Toxic Sensor M20 - 2106B1415
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NH3 0-100 ppm Toxic Sensor M20 - 2106B1415




    Item #2106B1415
    BrandHoneywell Analytics
    Price: $1,131.00
    Quantity:

    2106B1415 Sensepoint Hazardous Area Approved Gas Detector, NH3 0-100 ppm Toxic Sensor M20 by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2 0-10000ppm Toxic Sensor 3/4NPT CSA - 2106B1817
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2 0-10000ppm Toxic Sensor 3/4NPT CSA - 2106B1817




    Item #2106B1817
    BrandHoneywell Analytics
    Price: $1,354.00
    Quantity:

    2106B1817 Sensepoint Hazardous Area Approved Gas Detector, H2 0-10000ppm Toxic Sensor 3/4NPT CSA by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2 0-1000 ppm Toxic Sensor M20 - 2106B1416
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2 0-1000 ppm Toxic Sensor M20 - 2106B1416




    Item #2106B1416
    BrandHoneywell Analytics
    Price: $1,131.00
    Quantity:

    2106B1416 Sensepoint Hazardous Area Approved Gas Detector, H2 0-1000 ppm Toxic Sensor M20 by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2 0-10000 ppm Toxic Sensor M20 - 2106B1417
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2 0-10000 ppm Toxic Sensor M20 - 2106B1417




    Item #2106B1417
    BrandHoneywell Analytics
    Price: $1,064.00
    Quantity:

    2106B1417 Sensepoint Hazardous Area Approved Gas Detector, H2 0-10000 ppm Toxic Sensor M20 by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NO 0-100 ppm Toxic Sensor M20 - 2106B1418
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NO 0-100 ppm Toxic Sensor M20 - 2106B1418




    Item #2106B1418
    BrandHoneywell Analytics
    Price: $1,131.00
    Quantity:

    2106B1418 Sensepoint Hazardous Area Approved Gas Detector, NO 0-100 ppm Toxic Sensor M20 by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, SO2 0-15 ppm Toxic Sensor M20 - 2106B1420
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, SO2 0-15 ppm Toxic Sensor M20 - 2106B1420




    Item #2106B1420
    BrandHoneywell Analytics
    Price: $1,131.00
    Quantity:

    2106B1420 Sensepoint Hazardous Area Approved Gas Detector, SO2 0-15 ppm Toxic Sensor M20 by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, SO2 0-50 ppm Toxic Sensor M20 - 2106B1421
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, SO2 0-50 ppm Toxic Sensor M20 - 2106B1421




    Item #2106B1421
    BrandHoneywell Analytics
    Price: $1,212.00
    Quantity:

    2106B1421 Sensepoint Hazardous Area Approved Gas Detector, SO2 0-50 ppm Toxic Sensor M20 by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NO2 0-10 ppm Toxic Sensor M20 - 2106B1422
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NO2 0-10 ppm Toxic Sensor M20 - 2106B1422




    Item #2106B1422
    BrandHoneywell Analytics
    Price: $1,131.00
    Quantity:

    2106B1422 Sensepoint Hazardous Area Approved Gas Detector, NO2 0-10 ppm Toxic Sensor M20 by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, O2 25% V/V Toxic Sensor 3/4NPT - 2106B1730
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, O2 25% V/V Toxic Sensor 3/4NPT - 2106B1730




    Item #2106B1730
    BrandHoneywell Analytics
    Price: $1,098.00
    Quantity:

    2106B1730 Sensepoint Hazardous Area Approved Gas Detector, O2 25% V/V Toxic Sensor 3/4NPT by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, O2 25% V/V Toxic Sensor M20 - 2106B1430
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, O2 25% V/V Toxic Sensor M20 - 2106B1430




    Item #2106B1430
    BrandHoneywell Analytics
    Price: $1,131.00
    Quantity:

    2106B1430 Sensepoint Hazardous Area Approved Gas Detector, O2 25% V/V Toxic Sensor M20 by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2S 0-50 ppm Toxic Sensor 3/4NPT CSA - 2106B1801
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2S 0-50 ppm Toxic Sensor 3/4NPT CSA - 2106B1801




    Item #2106B1801
    BrandHoneywell Analytics
    Price: $1,354.00
    Quantity:

    2106B1801 Sensepoint Hazardous Area Approved Gas Detector, H2S 0-50 ppm Toxic Sensor 3/4NPT CSA by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, CO 0-200 ppm Toxic Sensor 3/4NPT CSA - 2106B1806
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, CO 0-200 ppm Toxic Sensor 3/4NPT CSA - 2106B1806




    Item #2106B1806
    BrandHoneywell Analytics
    Price: $1,354.00
    Quantity:

    2106B1806 Sensepoint Hazardous Area Approved Gas Detector, CO 0-200 ppm Toxic Sensor 3/4NPT CSA by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, Cl2 0-5 ppm Toxic Sensor 3/4NPT CSA - 2106B1810
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, Cl2 0-5 ppm Toxic Sensor 3/4NPT CSA - 2106B1810




    Item #2106B1810
    BrandHoneywell Analytics
    Price: $1,533.00
    Quantity:

    2106B1810 Sensepoint Hazardous Area Approved Gas Detector, Cl2 0-5 ppm Toxic Sensor 3/4NPT CSA by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NH3 0-50 ppm Toxic Sensor 3/4NPT CSA - 2106B1813
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NH3 0-50 ppm Toxic Sensor 3/4NPT CSA - 2106B1813




    Item #2106B1813
    BrandHoneywell Analytics
    Price: $1,513.00
    Quantity:

    2106B1813 Sensepoint Hazardous Area Approved Gas Detector, NH3 0-50 ppm Toxic Sensor 3/4NPT CSA by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2 0-1000 ppm Toxic Sensor 3/4NPT CSA - 2106B1816
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2 0-1000 ppm Toxic Sensor 3/4NPT CSA - 2106B1816




    Item #2106B1816
    BrandHoneywell Analytics
    Price: $1,199.00
    Quantity:

    2106B1816 Sensepoint Hazardous Area Approved Gas Detector, H2 0-1000 ppm Toxic Sensor 3/4NPT CSA by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NO 0-100 ppm Toxic Sensor 3/4NPT CSA - 2106B1818
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NO 0-100 ppm Toxic Sensor 3/4NPT CSA - 2106B1818




    Item #2106B1818
    BrandHoneywell Analytics
    Price: $1,463.00
    Quantity:

    2106B1818 Sensepoint Hazardous Area Approved Gas Detector, NO 0-100 ppm Toxic Sensor 3/4NPT CSA by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, SO2 0-15 ppm Toxic Sensor 3/4NPT CSA - 2106B1820
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, SO2 0-15 ppm Toxic Sensor 3/4NPT CSA - 2106B1820




    Item #2106B1820
    BrandHoneywell Analytics
    Price: $1,533.00
    Quantity:

    2106B1820 Sensepoint Hazardous Area Approved Gas Detector, SO2 0-15 ppm Toxic Sensor 3/4NPT CSA by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NO2 0-10 ppm Toxic Sensor 3/4NPT CSA - 2106B1822
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NO2 0-10 ppm Toxic Sensor 3/4NPT CSA - 2106B1822




    Item #2106B1822
    BrandHoneywell Analytics
    Price: $1,354.00
    Quantity:

    2106B1822 Sensepoint Hazardous Area Approved Gas Detector, NO2 0-10 ppm Toxic Sensor 3/4NPT CSA by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, 0-25 V/V O2 Toxic Sensor 3/4NPT CSA - 2106B1830
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, 0-25 V/V O2 Toxic Sensor 3/4NPT CSA - 2106B1830




    Item #2106B1830
    BrandHoneywell Analytics
    Price: $1,250.00
    Quantity:

    2106B1830 Sensepoint Hazardous Area Approved Gas Detector, 0-25 V/V O2 Toxic Sensor 3/4NPT CSA by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, CO 0-100PPM 3/4NPT (ATEX) - 2106B1705
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, CO 0-100PPM 3/4NPT (ATEX) - 2106B1705




    Item #2106B1705
    BrandHoneywell Analytics
    Price: $1,071.00
    Quantity:

    2106B1705 Sensepoint Hazardous Area Approved Gas Detector, CO 0-100PPM 3/4NPT (ATEX) by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2 0-1000PPM 3/4NPT ATEX - 2106B1716
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2 0-1000PPM 3/4NPT ATEX - 2106B1716




    Item #2106B1716
    BrandHoneywell Analytics
    Price: $1,098.00
    Quantity:

    2106B1716 Sensepoint Hazardous Area Approved Gas Detector, H2 0-1000PPM 3/4NPT ATEX by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2 0-10000PPM 3/4NPT (ATEX) - 2106B1717
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, H2 0-10000PPM 3/4NPT (ATEX) - 2106B1717




    Item #2106B1717
    BrandHoneywell Analytics
    Price: $1,098.00
    Quantity:

    2106B1717 Sensepoint Hazardous Area Approved Gas Detector, H2 0-10000PPM 3/4NPT (ATEX) by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NO 0-100PPM 3/4NPT (ATEX) - 2106B1718
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NO 0-100PPM 3/4NPT (ATEX) - 2106B1718




    Item #2106B1718
    BrandHoneywell Analytics
    Price: $1,098.00
    Quantity:

    2106B1718 Sensepoint Hazardous Area Approved Gas Detector, NO 0-100PPM 3/4NPT (ATEX) by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, SO2 0-15PPM 3/4NPT (ATEX) - 2106B1720
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, SO2 0-15PPM 3/4NPT (ATEX) - 2106B1720




    Item #2106B1720
    BrandHoneywell Analytics
    Price: $1,176.00
    Quantity:

    2106B1720 Sensepoint Hazardous Area Approved Gas Detector, SO2 0-15PPM 3/4NPT (ATEX) by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, SO2 0-50 PPM 3/4 NPT (ATEX) - 2106B1721
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, SO2 0-50 PPM 3/4 NPT (ATEX) - 2106B1721




    Item #2106B1721
    BrandHoneywell Analytics
    Price: $1,098.00
    Quantity:

    2106B1721 Sensepoint Hazardous Area Approved Gas Detector, SO2 0-50 PPM 3/4 NPT (ATEX) by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NO2 0-10PPM 3/4NPT (ATEX) - 2106B1722
    View Product Details >

    Honeywell Analytics Sensepoint Hazardous Area Approved Gas Detector, NO2 0-10PPM 3/4NPT (ATEX) - 2106B1722




    Item #2106B1722
    BrandHoneywell Analytics
    Price: $1,098.00
    Quantity:

    2106B1722 Sensepoint Hazardous Area Approved Gas Detector, NO2 0-10PPM 3/4NPT (ATEX) by Honeywell Analytics

    The Sensepoint range of flammable, toxic and Oxygen gas detectors offer users a high quality, low cost solution to their industrial gas monitoring needs. Installation in potentially explosive atmospheres is made by the use of a suitable Ex d or Ex e approved junction box. The industry standard outputs from Sensepoint are connected to either a choice of Honeywell Analytics' controllers or 3rd party DCS/ PLC systems. Both flammable and toxic versions are certified to the latest ATEX/IECEx safety and performance standards.

    The flammable detector is available in either % LEL or PPM detection range versions and provides an industry standard mV bridge output. Typical life expectancy is greater than 5 years, after which the detector is simply replaced with a new one.

    The toxic detectors are supplied pre calibrated for easy installation and provide an industry standard 2 wire 4-20mA loop output. User connections are Ex d, while front end Intrinsic Safety (IS) design allows for easy exchange of the replaceable sensor while powered. IS design also removes the need for a sinter enabling very fast speed of response and detection of 'sticky' gases such as Chlorine and Ammonia.

    Sensepoint has proven its suitability across a wide range of demanding applications by delivering high performance and reliability at an affordable cost.

    Fit For Purpose

    • Flammable, toxic and Oxygen versions available
    • High performance, low cost
    • Suitable for new and retro fit applications

    Proven Sensor Technology

    • Surecell™ electrochemical sensors
    • Poison resistant catalytic bead
    • Fast and reliable
    • Typical 2 to 5 years operational life

    ATEX/IECEx Certified

    • Complies with the latest standards
    • Hazardous area approval and performance
    • IP65/67 for use in harsh environments

    Easy to Use

    • Factory set operation
    • Simple to replace
    • Minimal training required

    Range of Accessories

    • Weatherproof cap
    • Flow adaptor
    • Duct mounting kit
    • Collecting cone
     
    Items per page:
    Sort by: