Arsenic Quick Test Kits

481396-2 Arsenic Quick Test Kit by ITS

Industrial Test Systems, Inc. features an impressive array of inorganic Arsenic Quick™ test kits that provide accurate results at affordable prices. Designed using cutting-edge chemistry, our kits report results in as few as 14 minutes and detect from 0.3 ppb. Our patented test kits are recommended by numerous states. Performance and accuracy of these kits have been verified by the USEPA through the ETV program ( www.epa.gov/etv). Our easy-to-use kits require no technical training. We invite you to see why the Quick™ line of Arsenic test kits from ITS are recognized throughout the world as premium inorganic arsenic field test kits. ALL KITS MEET HAZMAT COMPLIANCE STANDARDS FOR SHIPPING.

All Arsenic Quick™ kits detect below the MCL limits of inorganic arsenic concentrations in drinking water set by the EPA of 10 ppb (parts per billion) and the FDA limit in bottled water of 5 ppb.

481297-2 Arsenic Quick Mini 2's Low Range Test Kit by ITS

Industrial Test Systems, Inc. features an impressive array of inorganic Arsenic Quick™ test kits that provide accurate results at affordable prices. Designed using cutting-edge chemistry, our kits report results in as few as 14 minutes and detect from 0.3 ppb. Our patented test kits are recommended by numerous states. Performance and accuracy of these kits have been verified by the USEPA through the ETV program ( www.epa.gov/etv). Our easy-to-use kits require no technical training. We invite you to see why the Quick™ line of Arsenic test kits from ITS are recognized throughout the world as premium inorganic arsenic field test kits. ALL KITS MEET HAZMAT COMPLIANCE STANDARDS FOR SHIPPING.

All Arsenic Quick™ kits detect below the MCL limits of inorganic arsenic concentrations in drinking water set by the EPA of 10 ppb (parts per billion) and the FDA limit in bottled water of 5 ppb.

481303-2 Arsenic Quick II Mini 2's Test Kit by ITS

Industrial Test Systems, Inc. features an impressive array of inorganic Arsenic Quick™ test kits that provide accurate results at affordable prices. Designed using cutting-edge chemistry, our kits report results in as few as 14 minutes and detect from 0.3 ppb. Our patented test kits are recommended by numerous states. Performance and accuracy of these kits have been verified by the USEPA through the ETV program ( www.epa.gov/etv). Our easy-to-use kits require no technical training. We invite you to see why the Quick™ line of Arsenic test kits from ITS are recognized throughout the world as premium inorganic arsenic field test kits. ALL KITS MEET HAZMAT COMPLIANCE STANDARDS FOR SHIPPING.

All Arsenic Quick™ kits detect below the MCL limits of inorganic arsenic concentrations in drinking water set by the EPA of 10 ppb (parts per billion) and the FDA limit in bottled water of 5 ppb.

481396-W Arsenic Quick Wood Field Testing Kit by ITS

Arsenic Quick™ for wood field testing is a quick, easy, field test kit that can confirm the presence of inorganic arsenic in wood. Arsenic Quick™ 481396-W kit is a modification of the US Patented, ETV Verified arsenic test for drinking water. This 10 minute test readily confirms the absence or presence of arsenic in any wood sample, including CCA treated lumber using safe reagents. IT also detects the presence of 1 µg of inorganic arsenic with a yellow to brown coloration of the reacted test strip. Because the arsenic presence in aged wood can not be detected at the surface of the wood the test procedure recommends that a 1/4" drill bit is used to collect a 1/2" drilled sample from the wood. This drilled sample is added to the reaction bottle for analysis.

With only one simple test procedure (using 3 reagents), Arsenic Quick™ is a must for any professional, or service technician who values accurate, rapid results without sacrificing cost.

QuickTM Arsenic tests were developed with considerations for safety, sensitivity easy-of-use, and speed.

Safety has not been compromised for convenience in the Arsenic Quick family of arsenic field test kits. All reagents are in powder form and have been carefully selected to minimize the hazards associated with conventional arsenic testing. All components needed to accurately detect and measure arsenic are included in a portable ready-to-use kit.

Our easy to follow test procedure requires only three reagents and as little as 12 minutes to perform. Reagents are clearly labeled and color coded to make arsenic testing error free. A colorimetric test strip is used to take the guesswork out of accurate arsenic measurement. The matching color chart is thoughtfully printed with extra large color blocks and contrasting colors for quick and accurate determinations.

The patented (6,696,300) and patent pending test kits have five formats available to suit any testing requirement. Our standard Arsenic QuickTM test kit detects 5 ppb (µg/L) of arsenic in 12 minutes. For added sensitivity, use the Low Range Arsenic QuickTM kit to detect arsenic concentrations of 2 ppb (µg/L) in 12 minutes. The Arsenic Econo-QuickTM kit is our latest addition with 300 tests per kit at a low price and a detection level of 10 ppb (µg/L) with a quick 12 minute test time. For single use, retail sale, and evaluation, a 2-test Arsenic QuickTM kit is also offered.

Detection Range: 0.0, 0.005, 0.01, 0.02, 0.06, 0.1, 0.3, 0.5, >0.5, >0.5 ppm (mg/L)
Total Test Time: 12 Minutes
Number of Tests per Kit: 5

481396-5 Arsenic Quick 5 Test Mini-Kit by ITS

Industrial Test Systems, Inc. features an impressive array of inorganic Arsenic Quick™ test kits that provide accurate results at affordable prices. Designed using cutting-edge chemistry, our kits report results in as few as 14 minutes and detect from 0.3 ppb. Our patented test kits are recommended by numerous states. Performance and accuracy of these kits have been verified by the USEPA through the ETV program ( www.epa.gov/etv). Our easy-to-use kits require no technical training. We invite you to see why the Quick™ line of Arsenic test kits from ITS are recognized throughout the world as premium inorganic arsenic field test kits. ALL KITS MEET HAZMAT COMPLIANCE STANDARDS FOR SHIPPING.

All Arsenic Quick™ kits detect below the MCL limits of inorganic arsenic concentrations in drinking water set by the EPA of 10 ppb (parts per billion) and the FDA limit in bottled water of 5 ppb.

Test Procedure:

1. For best results, verify that the water temperature is between 20°C to 30°C (ideally 22°C to 28°C). Use a thermometer to verify the temperature of the sample.

2. To each Reaction Bottle, slowly and carefully add the water sample to the upper marked line on the bottle (100 mL).

3. Add 3 level pink spoonfuls of First Quick TM Reagent to each Reaction Bottle. Cap bottles securely with yellow mixing caps and shake vigorously with bottles upright for 15 seconds.

4. Uncap both Reaction Bottles; add 3 level red spoonfuls of Second Reagent to each. Cap bottles securely with yellow mixing caps and shake vigorously with bottles upright for 15 seconds.

This step allows the test to tolerate Hydrogen Sulfide (H2S) up to 2ppm (mg/L). If you suspect the presence of H2S by smell or testing, allow the sample to sit for 2 minutes to minimize H2S interference before proceeding to Step 5.

5. Uncap both Reaction Bottles and add 3 level white spoonfuls of Third Reagent to each. Cap bottles securely with yellow mixing caps and shake vigorously with bottle upright for 5 seconds.

6. Remove yellow mixing caps. Recap bottles securely using white reaction caps with turret up (open).

7. Remove two Arsenic test strips from the test strip bottle. Immediately recap the test strip bottle. In order for the results to be accurate, the test strips must be oriented correctly, and inserted to the correct depth. Insert the test strip into the turret:

a) Position the strip so that the test pad and red line are facing the back of the white reaction cap (see photo).

b) Insert the strip into the turret until the red line is even with the top of the turret, and close (flip down) the turret. This will hold the test strip in place.

8. Using a timer, time the reaction for 10 minutes. Allow the reaction to occur in an undisturbed, well-ventilated area. You will notice small hydrogen gas bubbles being generated.

9. After the 10 minute wait, pull up the turrets and carefully remove the test strips. Do not touch the reaction pads. Use the Quick TM Easy-Read TM Color Chart to match the reaction pad color. Position the reacted test strip pad behind the punched holes, view center of test strip pad through the hole, and confirm precise color match and Arsenic level. Complete matching within the next 30 seconds. After 30 seconds have elapsed, the colors may begin to change. For best color matching results, use natural daylight; avoid direct sunlight.

10. Record your results.

Quick™ Arsenic tests were developed with considerations for safety, sensitivity easy-of-use, and speed.

Safety has not been compromised for convenience in the Arsenic Quick family of arsenic field test kits. All reagents are in powder form and have been carefully selected to minimize the hazards associated with conventional arsenic testing. All components needed to accurately detect and measure arsenic are included in a portable ready-to-use kit.

Our easy to follow test procedure requires only three reagents and as little as 12 minutes to perform. Reagents are clearly labeled and color coded to make arsenic testing error free. A colorimetric test strip is used to take the guesswork out of accurate arsenic measurement. The matching color chart is thoughtfully printed with extra large color blocks and contrasting colors for quick and accurate determinations.

The patented (6,696,300) and patent pending test kits have five formats available to suit any testing requirement. Our standard Arsenic QuickTM test kit detects 5 ppb (µg/L) of arsenic in 12 minutes. For added sensitivity, use the Low Range Arsenic QuickTM kit to detect arsenic concentrations of 2 ppb (µg/L) in 12 minutes. The Arsenic Econo-QuickTM kit is our latest addition with 300 tests per kit at a low price and a detection level of 10 ppb (µg/L) with a quick 12 minute test time. For single use, retail sale, and evaluation, a 2-test Arsenic QuickTM kit is also offered.

Detection Range: 0, 5, 10, 20, 60, 100, 300, 500, >500, >>500 ppb (µg/L)
Total Test Time: 12 Minutes
Number of Tests per Kit: 5

481303-5 Arsenic Quick II Kit by ITS

Arsenic Quick™ II for water quality testing was designed to give the user accurate results without sacrificing cost and time. Designed using cutting-edge chemistry, Arsenic Quick™ II reports results in only 14 minutes. Additionally, there are no dangerous chemicals needed to run this water quality test kit. With only 3 simple test procedures, Arsenic Quick™ II is a must for any lab, water testing professional, or service technician who values accurate, rapid results without sacrificing cost.

QuickTM Arsenic tests were developed with considerations for safety, sensitivity, easy-of-use, and speed.

Safety has not been compromised for convenience in the Arsenic Quick family of arsenic field test kits. All reagents are in powder form and have been carefully selected to minimize the hazards associated with conventional arsenic testing. All components needed to accurately detect and measure arsenic are included in a portable ready-to-use kit.

Our easy to follow test procedure requires only three reagents and as little as 12 minutes to perform. Reagents are clearly labeled and color coded to make arsenic testing error free. A colorimetric test strip is used to take the guesswork out of accurate arsenic measurement. The matching color chart is thoughtfully printed with extra large color blocks and contrasting colors for quick and accurate determinations.

Here's how it works:

First, your water sample is mixed in the supplied reaction vessel with reagent #1 (Tartaric acid with rate enhancers). This will acidify your water sample. Reagent #2, an oxidizer, is then added to remove hydrogen sulfide interference. Finally, with the addition of Zinc powder, reagent #3, inorganic arsenic compounds (As+3 and As+5) are reduced to arsine gas. A test strip is used to measure the arsine gas concentration in the water sample.

As arsine gas is generated and comes in contact with the test strip, the Mercuric bromide indicator on the test strip changes in color from white to shades of yellow or brown. Once the reaction is completed, the test strip is removed and matched to a calibrated color chart to obtain a quantitative measure of arsenic in the tested sample.

The patented (6,696,300) and patent pending test kits have five formats available to suit any testing requirement. Our standard Arsenic Quick™ test kit detects 5 ppb (µg/L) of arsenic in 12 minutes. For added sensitivity, use the Low Range Arsenic Quick™ kit to detect arsenic concentrations of 2 ppb (µg/L) in 12 minutes. The Arsenic Econo-Quick™ kit is our latest addition with 300 tests per kit at a low price and a detection level of 10 ppb (µg/L) with a quick 12 minute test time. For single use, retail sale, and evaluation, a 2-test Arsenic Quick™ kit is also offered.

Information on the performance characteristics of Quick can be found at www.epa.gov/etv, or call ITS at 1-800-861-9712 for a copy of the ETV verification report. The use of the ETV® Name or Logo does not imply approval or certification of this product nor does it make any explicit or implied warranties or guarantees as to product performance.

Detection Range: <1, 2, 3, 4, 5, 6, 7, 8, 10, 13, 20, 25, 30, 40, >50, >80, >120, >160 ppb (µg/L)
Total Test Time: 14 Minutes
Number of Tests per Kit: 5

481301-5 Arsenic Low-Range Quick 5 Test Mini-Kit by ITS

Arsenic Low Range Quick™ II for water quality testing was designed to give the user accurate results without sacrificing cost and time. Designed using cutting-edge chemistry, Arsenic Low Range Quick™ II reports results in only 12 minutes. Additionally, there are no dangerous chemicals needed to run this water quality test kit. With only one simple test procedure (using 3 reagents), Arsenic Low Range Quick™ II is a must for any lab, water testing professional, or service technician who values accurate, rapid results without sacrificing cost.

QuickTM Arsenic tests were developed with considerations for safety, sensitivity, easy-of-use, and speed.

Safety has not been compromised for convenience in the Arsenic Quick™ family of arsenic field test kits. All reagents are in powder form and have been carefully selected to minimize the hazards associated with conventional arsenic testing. All components needed to accurately detect and measure arsenic are included in a portable ready-to-use kit.

Our easy to follow test procedure requires only three reagents and as little as 12 minutes to perform. Reagents are clearly labeled and color coded to make arsenic testing error free. A colorimetric test strip is used to take the guesswork out of accurate arsenic measurement. The matching color chart is thoughtfully printed with extra large color blocks and contrasting colors for quick and accurate determinations.

Here's how it works:

First, your water sample is mixed in the supplied reaction vessel with reagent #1 (Tartaric acid with rate enhancers). This will acidify your water sample. Reagent #2, an oxidizer, is then added to remove hydrogen sulfide interference. Finally, with the addition of Zinc powder, reagent #3, inorganic arsenic compounds (As+3 and As+5) are reduced to arsine gas. A test strip is used to measure the arsine gas concentration in the water sample.

As arsine gas is generated and comes in contact with the test strip, the Mercuric bromide indicator on the test strip changes in color from white to shades of yellow or brown. Once the reaction is completed, the test strip is removed and matched to a calibrated color chart to obtain a quantitative measure of arsenic in the tested sample.

The patented (6,696,300) and patent pending test kits have five formats available to suit any testing requirement. Our standard Arsenic Quick™ test kit detects 5 ppb (µg/L) of arsenic in 12 minutes. For added sensitivity, use the Low Range Arsenic Quick™ kit to detect arsenic concentrations of 2 ppb (µg/L) in 12 minutes. The Arsenic Econo-Quick™ kit is our latest addition with 300 tests per kit at a low price and a detection level of 10 ppb (µg/L) with a quick 12 minute test time. For single use, retail sale, and evaluation, a 2-test Arsenic Quick™ kit is also offered.

Information on the performance characteristics of Quick can be found at www.epa.gov/etv, or call ITS at 1-800-861-9712 for a copy of the ETV verification report. The use of the ETV® Name or Logo does not imply approval or certification of this product nor does it make any explicit or implied warranties or guarantees as to product performance.

Detection Range: <0.5, 1.0, 1.5, 2, 3, 4, 5, 6, 7, 8, 12, >20, >30, > 50 ppb (µg/L)
Total Test Time: 14 Minutes
Number of Tests per Kit: 5

481300-5 Arsenic Ultra Low Quick II 5 Test Mini Kit by ITS

Arsenic Ultra Low Quick™ II for water quality testing was designed to give the you accurate results without sacrificing cost and time. Designed using cutting-edge chemistry, Arsenic Ultra Low Quick™ II reports results in only 14 minutes. Additionally, there are no dangerous chemicals needed to run this water quality test kit. With only one simple test procedure (using 3 reagents), Arsenic Ultra Low Quick™ II is a must for any lab, water testing professional, or service technician who values accurate, rapid results without sacrificing cost.

QuickTM Arsenic tests were developed with considerations for safety, sensitivity, easy-of-use, and speed. Safety has not been compromised for convenience in the Arsenic Quick™ family of arsenic field test kits. All reagents are in powder form and have been carefully selected to minimize the hazards associated with conventional arsenic testing. All components needed to accurately detect and measure arsenic are included in a portable ready-to-use kit.

Our easy to follow test procedure requires only three reagents and as little as 12 minutes to perform. Reagents are clearly labeled and color coded to make arsenic testing error free. A colorimetric test strip is used to take the guesswork out of accurate arsenic measurement. The matching color chart is thoughtfully printed with extra large color blocks and contrasting colors for quick and accurate determinations.

Here's how it works:

First, your water sample is mixed in the supplied reaction vessel with reagent #1 (Tartaric acid with rate enhancers). This will acidify your water sample. Reagent #2, an oxidizer, is then added to remove hydrogen sulfide interference. Finally, with the addition of Zinc powder, reagent #3, inorganic arsenic compounds (As+3 and As+5) are reduced to arsine gas. A test strip is used to measure the arsine gas concentration in the water sample.

As arsine gas is generated and comes in contact with the test strip, the Mercuric bromide indicator on the test strip changes in color from white to shades of yellow or brown. Once the reaction is completed, the test strip is removed and matched to a calibrated color chart to obtain a quantitative measure of arsenic in the tested sample.

The patented (6,696,300) and patent pending test kits have five formats available to suit any testing requirement. Our standard Arsenic Quick™ test kit detects 5 ppb (µg/L) of arsenic in 12 minutes. For added sensitivity, use the Low Range Arsenic Quick™ kit to detect arsenic concentrations of 2 ppb (µg/L) in 12 minutes. The Arsenic Econo-Quick™ kit is our latest addition with 300 tests per kit at a low price and a detection level of 10 ppb (µg/L) with a quick 12 minute test time. For single use, retail sale, and evaluation, a 2-test Arsenic Quick™ kit is also offered.

Detection Range: 0.0, 0.3, 0.7, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4, 5, 6, 8, 10, 13, 20, <20 ppb (µg/L)
Total Test Time: 14 Minutes
Number of Tests per Kit: 5

481298 Arsenic Econo-Quick Test Kit by ITS

Arsenic Econo-Quick™ for water quality testing is ideal for field and lab technicians whose time is valuable and who do a large volume of tests. With accurate results in only 12 minutes, Arsenic Econo-Quick™ uses one simple procedure with 3 reagents that minimizes exposure to chemicals and maximizes the use of your time. With results comparable to high-end ICP testing methods, at a fraction of the cost, Arsenic Econo-Quick™ only requires a 50mL sample size to run. Everything you need to achieve results is included in this water quality test kit. In addition, Arsenic Econo-Quick uses no dangerous chemicals, like Sulfamic or Hydrochloric Acid, and features a unique chamber design which reduces your exposure to the generated arsine gas. With the included Easy-Read color chart, matching is simple and reliable water quality testing results can be achieved by non-technical personnel.

QuickTM Arsenic tests were developed with considerations for safety, sensitivity easy-of-use, and speed.

Safety has not been compromised for convenience in the Arsenic Quick™ family of arsenic field test kits. All reagents are in powder form and have been carefully selected to minimize the hazards associated with conventional arsenic testing. All components needed to accurately detect and measure arsenic are included in a portable ready-to-use kit.

Our easy to follow test procedure requires only three reagents and as little as 12 minutes to perform. Reagents are clearly labeled and color coded to make arsenic testing error free. A colorimetric test strip is used to take the guesswork out of accurate arsenic measurement. The matching color chart is thoughtfully printed with extra large color blocks and contrasting colors for quick and accurate determinations.

Here's how it works:

First, your water sample is mixed in the supplied reaction vessel with reagent #1 (Tartaric acid with rate enhancers). This will acidify your water sample. Reagent #2, an oxidizer, is then added to remove hydrogen sulfide interference. Finally, with the addition of Zinc powder, reagent #3, inorganic arsenic compounds (As+3 and As+5) are reduced to arsine gas. A test strip is used to measure the arsine gas concentration in the water sample.

As arsine gas is generated and comes in contact with the test strip, the Mercuric bromide indicator on the test strip changes in color from white to shades of yellow or brown. Once the reaction is completed, the test strip is removed and matched to a calibrated color chart to obtain a quantitative measure of arsenic in the tested sample.

The included test procedure is designed to detect inorganic arsenic As+3 and As+5. Test procedures are also available for arsenic in soil.

The patented (6,696,300) and patent pending test kits have five formats available to suit any testing requirement. Our standard Arsenic Quick™ test kit detects 5 ppb (µg/L) of arsenic in 12 minutes. For added sensitivity, use the Low Range Arsenic Quick™ kit to detect arsenic concentrations of 2 ppb (µg/L) in 12 minutes. The Arsenic Econo-Quick™ kit is our latest addition with 300 tests per kit at a low price and a detection level of 10 ppb (µg/L) with a quick 12 minute test time. For single use, retail sale, and evaluation, a 2-test Arsenic Quick™ kit is also offered.

Detection Range: 0, 0.010, 0.025, 0.05, 0.1, 0.2, 0.3, 0.5, 1.0 ppm (mg/L)
Total Test Time: 12 Minutes
Number of Tests per Kit: 300

481396 Arsenic Quick Test Kit by ITS

Arsenic Quick™ for water quality testing was designed to give the user accurate results without sacrificing cost and time. Designed using cutting-edge chemistry, Arsenic Quick™ reports results in only 12 minutes. Additionally, there are no dangerous chemicals needed to run this kit to test water quality. With only one simple test procedure (using 3 reagents), Arsenic Quick is a must for any lab testing water quality, water testing professional, or service technician who values accurate, rapid results without sacrificing cost.

Test Procedure:

1. For best results, verify that the water temperature is between 20°C to 30°C (ideally 22°C to 28°C). Use a thermometer to verify the temperature of the sample.

2. To each Reaction Bottle, slowly and carefully add the water sample to the upper marked line on the bottle (100 mL).

3. Add 3 level pink spoonfuls of First Quick TM Reagent to each Reaction Bottle. Cap bottles securely with yellow mixing caps and shake vigorously with bottles upright for 15 seconds.

4. Uncap both Reaction Bottles; add 3 level red spoonfuls of Second Reagent to each. Cap bottles securely with yellow mixing caps and shake vigorously with bottles upright for 15 seconds.

This step allows the test to tolerate Hydrogen Sulfide (H2S) up to 2ppm (mg/L). If you suspect the presence of H2S by smell or testing, allow the sample to sit for 2 minutes to minimize H2S interference before proceeding to Step 5.

5. Uncap both Reaction Bottles and add 3 level white spoonfuls of Third Reagent to each. Cap bottles securely with yellow mixing caps and shake vigorously with bottle upright for 5 seconds.

6. Remove yellow mixing caps. Recap bottles securely using white reaction caps with turret up (open).

7. Remove two Arsenic test strips from the test strip bottle. Immediately recap the test strip bottle. In order for the results to be accurate, the test strips must be oriented correctly, and inserted to the correct depth.

Insert the test strip into the turret:

a) Position the strip so that the test pad and red line are facing the back of the white reaction cap (see photo).

b) Insert the strip into the turret until the red line is even with the top of the turret, and close (flip down) the turret. This will hold the test strip in place.

8. Using a timer, time the reaction for 10 minutes. Allow the reaction to occur in an undisturbed, well-ventilated area. You will notice small hydrogen gas bubbles being generated.

9. After the 10 minute wait, pull up the turrets and carefully remove the test strips. Do not touch the reaction pads. Use the Quick TM Easy-Read TM Color Chart to match the reaction pad color. Position the reacted test strip pad behind the punched holes, view center of test strip pad through the hole, and confirm precise color match and Arsenic level. Complete matching within the next 30 seconds. After 30 seconds have elapsed, the colors may begin to change. For best color matching results, use natural daylight; avoid direct sunlight.

10. Record your results.

Safety has not been compromised for convenience in the Arsenic Quick family of arsenic field test kits. All reagents are in powder form and have been carefully selected to minimize the hazards associated with conventional arsenic testing. All components needed to accurately detect and measure arsenic are included in a portable ready-to-use kit.

Our easy to follow test procedure requires only three reagents and as little as 12 minutes to perform. Reagents are clearly labeled and color coded to make arsenic testing error free. A colorimetric test strip is used to take the guesswork out of accurate arsenic measurement. The matching color chart is thoughtfully printed with extra large color blocks and contrasting colors for quick and accurate determinations.

The patented (6,696,300) and patent pending test kits have five formats available to suit any testing requirement. Our standard Arsenic QuickTM test kit detects 5 ppb (µg/L) of arsenic in 12 minutes. For added sensitivity, use the Low Range Arsenic QuickTM kit to detect arsenic concentrations of 2 ppb (µg/L) in 12 minutes. The Arsenic Econo-QuickTM kit is our latest addition with 300 tests per kit at a low price and a detection level of 10 ppb (µg/L) with a quick 12 minute test time. For single use, retail sale, and evaluation, a 2-test Arsenic QuickTM kit is also offered.

Detection Range: 0, 5, 10, 20, 30, 40, 50, 60, 80, 100, 150, 200, 250, 300, 400, 500, >500 ppb (µg/L)
Total Test Time: 12 Minutes
Number of Tests per Kit: 100

481297-I Arsenic Low Range Quick Test Kit by ITS

Low Range Arsenic Quick™ is the premier product in the Quick line of arsenic water quality testing kits. Yielding results in only 12 minutes, Low Range Arsenic Quick™ combines low sensitivity with ease-of-use. Ideal for on-the-spot field testing, Low Range Arsenic Quick™ gives you the tools for tomorrow, today. With the US EPA imposing new, stricter regulations pertaining to arsenic in drinking water, many of the testing methods currently used today will be rendered inadequate in the future. Low Range Arsenic Quick™ has been designed to give you a water quality testing kit that is good for today, tomorrow and the future. Requiring no technical expertise, Low Range Arsenic Quick™ is a tool that can be utilized by all members of your staff. To find out more, call 1-800-861-9712 today. Also, make sure you look at the independent research study, located under Resources, that was conducted on the Low Range Arsenic Quick™ water quality test kit.

QuickTM Arsenic tests were developed with considerations for safety, sensitivity easy-of-use, and speed.

Safety has not been compromised for convenience in the Arsenic Quick™ family of arsenic field test kits. All reagents are in powder form and have been carefully selected to minimize the hazards associated with conventional arsenic testing. All components needed to accurately detect and measure arsenic are included in a portable ready-to-use kit.

Our easy to follow test procedure requires only three reagents and as little as 12 minutes to perform. Reagents are clearly labeled and color coded to make arsenic testing error free. A colorimetric test strip is used to take the guesswork out of accurate arsenic measurement. The matching color chart is thoughtfully printed with extra large color blocks and contrasting colors for quick and accurate determinations.

Here's how it works:

First, your water sample is mixed in the supplied reaction vessel with reagent #1 (Tartaric acid with rate enhancers). This will acidify your water sample. Reagent #2, an oxidizer, is then added to remove hydrogen sulfide interference. Finally, with the addition of Zinc powder, reagent #3, inorganic arsenic compounds (As+3 and As+5) are reduced to arsine gas. A test strip is used to measure the arsine gas concentration in the water sample.

As arsine gas is generated and comes in contact with the test strip, the Mercuric bromide indicator on the test strip changes in color from white to shades of yellow or brown. Once the reaction is completed, the test strip is removed and matched to a calibrated color chart to obtain a quantitative measure of arsenic in the tested sample.

The included test procedure is designed to detect inorganic arsenic As+3 and As+5. Test procedures are also available for arsenic in soil.

The patented (6,696,300) and patent pending test kits have five formats available to suit any testing requirement. Our standard Arsenic Quick™ test kit detects 5 ppb (µg/L) of arsenic in 12 minutes. For added sensitivity, use the Low Range Arsenic Quick™ kit to detect arsenic concentrations of 2 ppb (µg/L) in 12 minutes. The Arsenic Econo-Quick™ kit is our latest addition with 300 tests per kit at a low price and a detection level of 10 ppb (µg/L) with a quick 12 minute test time. For single use, retail sale, and evaluation, a 2-test Arsenic Quick™ kit is also offered.

Information on the performance characteristics of Quick can be found at www.epa.gov/etv, or call ITS at 1-800-861-9712 for a copy of the ETV verification report. The use of the ETV® Name or Logo does not imply approval or certification of this product nor does it make any explicit or implied warranties or guarantees as to product performance.

Detection Range: <2, 4, 10, 15, 20, 25, 30, 40, 50, 60, 70, 80, 100, >150, >300 ppb (µg/L)
Total Test Time: 14 Minutes
Number of Tests per Kit: 50

481304 Arsenic Econo-Quick II Test Kit by ITS

Arsenic Econo-Quick™ II for water quality testing was designed to give the user accurate results without sacrificing cost and time. Designed using cutting-edge chemistry, Arsenic Econo-Quick™ II reports results in only 12 minutes. Additionally, there are no dangerous chemicals needed to run this water quality test kit. With only one simple test procedure (using 3 reagents), Arsenic Econo-Quick™ II is a must for any lab, water testing professional, or service technician who values accurate, rapid results without sacrificing cost.

QuickTM Arsenic tests were developed with considerations for safety, sensitivity, easy-of-use, and speed.

Safety has not been compromised for convenience in the Arsenic Quick™ family of arsenic field test kits. All reagents are in powder form and have been carefully selected to minimize the hazards associated with conventional arsenic testing. All components needed to accurately detect and measure arsenic are included in a portable ready-to-use kit.

Our easy to follow test procedure requires only three reagents and as little as 12 minutes to perform. Reagents are clearly labeled and color coded to make arsenic testing error free. A colorimetric test strip is used to take the guesswork out of accurate arsenic measurement. The matching color chart is thoughtfully printed with extra large color blocks and contrasting colors for quick and accurate determinations.

Here's how it works:

First, your water sample is mixed in the supplied reaction vessel with reagent #1 (Tartaric acid with rate enhancers). This will acidify your water sample. Reagent #2, an oxidizer, is then added to remove hydrogen sulfide interference. Finally, with the addition of Zinc powder, reagent #3, inorganic arsenic compounds (As+3 and As+5) are reduced to arsine gas. A test strip is used to measure the arsine gas concentration in the water sample.

As arsine gas is generated and comes in contact with the test strip, the Mercuric bromide indicator on the test strip changes in color from white to shades of yellow or brown. Once the reaction is completed, the test strip is removed and matched to a calibrated color chart to obtain a quantitative measure of arsenic in the tested sample.

The patented (6,696,300) and patent pending test kits have five formats available to suit any testing requirement. Our standard Arsenic Quick™ test kit detects 5 ppb (µg/L) of arsenic in 12 minutes. For added sensitivity, use the Low Range Arsenic Quick™ kit to detect arsenic concentrations of 2 ppb (µg/L) in 12 minutes. The Arsenic Econo-Quick™ kit is our latest addition with 300 tests per kit at a low price and a detection level of 10 ppb (µg/L) with a quick 12 minute test time. For single use, retail sale, and evaluation, a 2-test Arsenic Quick™ kit is also offered.

Information on the performance characteristics of Quick™ can be found at www.epa.gov/etv, or call ITS at 1-800-861-9712 for a copy of the ETV verification report. The use of the ETV® Name or Logo does not imply approval or certification of this product nor does it make any explicit or implied warranties or guarantees as to product performance.

Detection Range: <2, 3, 5, 7, 8, 9, 10, 12, 16, 20, 25, 30, 40, 50, 80, >80, >90, >100 ppb (µg/L)
Total Test Time: 14 Minutes
Number of Tests per Kit: 100

481303 Arsenic Quick II Test Kit by ITS

Arsenic Quick™ II for water quality testing was designed to give the user accurate results without sacrificing cost and time. Designed using cutting-edge chemistry, Arsenic Quick™ II reports results in only 14 minutes. Additionally, there are no dangerous chemicals needed to run this water quality test kit. With only 3 simple test procedures, Arsenic Quick™ II is a must for any lab, water testing professional, or service technician who values accurate, rapid results without sacrificing cost.

QuickTM Arsenic tests were developed with considerations for safety, sensitivity, easy-of-use, and speed.

Safety has not been compromised for convenience in the Arsenic Quick family of arsenic field test kits. All reagents are in powder form and have been carefully selected to minimize the hazards associated with conventional arsenic testing. All components needed to accurately detect and measure arsenic are included in a portable ready-to-use kit.

Our easy to follow test procedure requires only three reagents and as little as 12 minutes to perform. Reagents are clearly labeled and color coded to make arsenic testing error free. A colorimetric test strip is used to take the guesswork out of accurate arsenic measurement. The matching color chart is thoughtfully printed with extra large color blocks and contrasting colors for quick and accurate determinations.

Here's how it works:

First, your water sample is mixed in the supplied reaction vessel with reagent #1 (Tartaric acid with rate enhancers). This will acidify your water sample. Reagent #2, an oxidizer, is then added to remove hydrogen sulfide interference. Finally, with the addition of Zinc powder, reagent #3, inorganic arsenic compounds (As+3 and As+5) are reduced to arsine gas. A test strip is used to measure the arsine gas concentration in the water sample.

As arsine gas is generated and comes in contact with the test strip, the Mercuric bromide indicator on the test strip changes in color from white to shades of yellow or brown. Once the reaction is completed, the test strip is removed and matched to a calibrated color chart to obtain a quantitative measure of arsenic in the tested sample.

The patented (6,696,300) and patent pending test kits have five formats available to suit any testing requirement. Our standard Arsenic Quick™ test kit detects 5 ppb (µg/L) of arsenic in 12 minutes. For added sensitivity, use the Low Range Arsenic Quick™ kit to detect arsenic concentrations of 2 ppb (µg/L) in 12 minutes. The Arsenic Econo-Quick™ kit is our latest addition with 300 tests per kit at a low price and a detection level of 10 ppb (µg/L) with a quick 12 minute test time. For single use, retail sale, and evaluation, a 2-test Arsenic Quick™ kit is also offered.

Information on the performance characteristics of Quick can be found at www.epa.gov/etv, or call ITS at 1-800-861-9712 for a copy of the ETV verification report. The use of the ETV® Name or Logo does not imply approval or certification of this product nor does it make any explicit or implied warranties or guarantees as to product performance.

Detection Range: <1, 2, 3, 4, 5, 6, 7, 8, 10, 13, 20, 25, 30, 40, >50, >80, >120, >160 ppb (µg/L)
Total Test Time: 14 Minutes
Number of Tests per Kit: 50

481301 Arsenic Low Range Quick II Test Kit by ITS

Arsenic Low Range Quick™ II for water quality testing was designed to give the user accurate results without sacrificing cost and time. Designed using cutting-edge chemistry, Arsenic Low Range Quick™ II reports results in only 12 minutes. Additionally, there are no dangerous chemicals needed to run this water quality test kit. With only one simple test procedure (using 3 reagents), Arsenic Low Range Quick™ II is a must for any lab, water testing professional, or service technician who values accurate, rapid results without sacrificing cost.

QuickTM Arsenic tests were developed with considerations for safety, sensitivity, easy-of-use, and speed.

Safety has not been compromised for convenience in the Arsenic Quick™ family of arsenic field test kits. All reagents are in powder form and have been carefully selected to minimize the hazards associated with conventional arsenic testing. All components needed to accurately detect and measure arsenic are included in a portable ready-to-use kit.

Our easy to follow test procedure requires only three reagents and as little as 12 minutes to perform. Reagents are clearly labeled and color coded to make arsenic testing error free. A colorimetric test strip is used to take the guesswork out of accurate arsenic measurement. The matching color chart is thoughtfully printed with extra large color blocks and contrasting colors for quick and accurate determinations.

Here's how it works:

First, your water sample is mixed in the supplied reaction vessel with reagent #1 (Tartaric acid with rate enhancers). This will acidify your water sample. Reagent #2, an oxidizer, is then added to remove hydrogen sulfide interference. Finally, with the addition of Zinc powder, reagent #3, inorganic arsenic compounds (As+3 and As+5) are reduced to arsine gas. A test strip is used to measure the arsine gas concentration in the water sample.

As arsine gas is generated and comes in contact with the test strip, the Mercuric bromide indicator on the test strip changes in color from white to shades of yellow or brown. Once the reaction is completed, the test strip is removed and matched to a calibrated color chart to obtain a quantitative measure of arsenic in the tested sample.

The patented (6,696,300) and patent pending test kits have five formats available to suit any testing requirement. Our standard Arsenic Quick™ test kit detects 5 ppb (µg/L) of arsenic in 12 minutes. For added sensitivity, use the Low Range Arsenic Quick™ kit to detect arsenic concentrations of 2 ppb (µg/L) in 12 minutes. The Arsenic Econo-Quick™ kit is our latest addition with 300 tests per kit at a low price and a detection level of 10 ppb (µg/L) with a quick 12 minute test time. For single use, retail sale, and evaluation, a 2-test Arsenic Quick™ kit is also offered.

Information on the performance characteristics of Quick can be found at www.epa.gov/etv, or call ITS at 1-800-861-9712 for a copy of the ETV verification report. The use of the ETV® Name or Logo does not imply approval or certification of this product nor does it make any explicit or implied warranties or guarantees as to product performance.

Detection Range: <0.5, 1, 1.5, 2, 3, 4, 5, 6, 7, 8, 12, >20, >30, >50 ppb (µg/L)
Total Test Time: 14 Minutes
Number of Tests per Kit: 50

481300 Arsenic Ultra Low Quick II Test Kit by ITS

Arsenic Ultra Low Quick™ II for water quality testing was designed to give the you accurate results without sacrificing cost and time. Designed using cutting-edge chemistry, Arsenic Ultra Low Quick™ II reports results in only 14 minutes. Additionally, there are no dangerous chemicals needed to run this water quality test kit. With only one simple test procedure (using 3 reagents), Arsenic Ultra Low Quick™ II is a must for any lab, water testing professional, or service technician who values accurate, rapid results without sacrificing cost.

QuickTM Arsenic tests were developed with considerations for safety, sensitivity, easy-of-use, and speed.

Safety has not been compromised for convenience in the Arsenic Quick™ family of arsenic field test kits. All reagents are in powder form and have been carefully selected to minimize the hazards associated with conventional arsenic testing. All components needed to accurately detect and measure arsenic are included in a portable ready-to-use kit.

Our easy to follow test procedure requires only three reagents and as little as 12 minutes to perform. Reagents are clearly labeled and color coded to make arsenic testing error free. A colorimetric test strip is used to take the guesswork out of accurate arsenic measurement. The matching color chart is thoughtfully printed with extra large color blocks and contrasting colors for quick and accurate determinations.

Here's how it works:

First, your water sample is mixed in the supplied reaction vessel with reagent #1 (Tartaric acid with rate enhancers). This will acidify your water sample. Reagent #2, an oxidizer, is then added to remove hydrogen sulfide interference. Finally, with the addition of Zinc powder, reagent #3, inorganic arsenic compounds (As+3 and As+5) are reduced to arsine gas. A test strip is used to measure the arsine gas concentration in the water sample.

As arsine gas is generated and comes in contact with the test strip, the Mercuric bromide indicator on the test strip changes in color from white to shades of yellow or brown. Once the reaction is completed, the test strip is removed and matched to a calibrated color chart to obtain a quantitative measure of arsenic in the tested sample.

The patented (6,696,300) and patent pending test kits have five formats available to suit any testing requirement. Our standard Arsenic Quick™ test kit detects 5 ppb (µg/L) of arsenic in 12 minutes. For added sensitivity, use the Low Range Arsenic Quick™ kit to detect arsenic concentrations of 2 ppb (µg/L) in 12 minutes. The Arsenic Econo-Quick™ kit is our latest addition with 300 tests per kit at a low price and a detection level of 10 ppb (µg/L) with a quick 12 minute test time. For single use, retail sale, and evaluation, a 2-test Arsenic Quick™ kit is also offered.

Detection Range: 0, 0.3, 0.7, 1.0, 1.5, 2, 2.5, 3, 3.5, 4, 5, 6, 8, 10, 13, 20, >20 ppb (µg/L)
Total Test Time: 14 Minutes
Number of Tests per Kit: 25

481305 Arsenic Quick Scan Test Kit by ITS

Arsenic Quick™ Scan for water quality testing was designed to yield high-precision results both in the lab and on-site. This portable density measurement device scans the reacted test strip and reports a density value. The user then matches that density value against a supplied look-up table and records the ppb (µg/L) result. This battery-operated instrument makes quick work out of level determination by removing the need to match colors; thus reducing color-matching errors and yielding reliable results. The Arsenic Quick™ Scan unit can be used with all Quick™ and Quick™ II series water quality test kits.

481297-5 Arsenic Quick Low Range Mini Kit by ITS

Arsenic Low Range Quick™ for water quality testing was designed to give the user accurate results without sacrificing cost and time. Designed using cutting-edge chemistry, Arsenic Low Range Quick™ reports results in only 14 minutes. Additionally, there are no dangerous chemicals needed to run this kit to test water quality. With only one simple test procedure, Arsenic Quick is a must for any lab testing water quality, water testing professional, or service technician who values accurate, rapid results without sacrificing cost.

• Total Test Time: 14 Minutes
• Sensitivity: <2, 4, 10, 15, 20, 25, 30, 40, 50, 60, 70, 80, 100, >150, >300 ppb (μg/L)
• Number of tests per kit: 5