Portable ORP Meters

5003 pH/mV Handheld Meter with LCD Digital Display by Jenco

pH/mV handheld meter with build in tabletop stand with LCD digital display. Manual temperature compensation and pH standardization calibration is via knobs and pH slope calibration is via potentiometer. Input connector is BNC type. AC/DC Powered.

• All solid state design
• Fast input response
• Low drift and high stability
• Tilt stand
• Rugged carrying case
• Low cost
• Manual temperature compensation for pH measurement
• Battery low indicator
• UL approved ac line adaptor
• One conventional 9v battery
• Extra long battery life
• Auto polarity mv measurement
• Analog recorder output

62 ORP Handheld Meter with Offset Adjustment by Jenco

ORP handheld meter with BNC and Zero Adjustment via manual potentiometers for calibration of meter and ORP electrode to calibration standard solutions. Housed in a rugged splash proof case with large LCD display. AC/DC Powered.

• Zero adjust for ORP
• LCD display
• Long 1400 hrs battery life
• High stability
• Rugged case

6230N Handheld pH/mV/Temp Microprocessor Meter with 3-Point Calibration & RS-232 by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, RS-232-C IBM compatible communication interface and BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved.

• 3 point calibration
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• RS-232c output
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• Aconventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

6231M pH/mV/Temp Microprocessor Handheld Meter with 3-Point Calibration by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, 40 memory storage, BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved

• 3 point calibration
• 40 memory storage
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• Aconventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

5005 pH/mV/Temp. Handheld Meter by Jenco

pH/mV/Temp. handheld meter with build in tabletop stand with LCD digital display. Meter has both ATC and manual temperature compensation. pH standardization calibration is via knobs and pH slope calibration is via potentiometer. Features include a voltage recorder output, reference input pin and BNC input connector. AC/DC Powered.

• All solid state design
• Fast input response
• Low drift and high stability
• Tilt stand
• Greater than 100db 50/60hz rejection
• Battery low indicator
• Extra long battery life
• Auto polarity mv measurement
• Analog recorder output
• Rugged carrying case
• UL approved ac line adaptor
• Aconventional 9v battery
• Manual and ATC for pH measurement
• 0 to 100.0 °C range of temperature measurement
• 0.5 high liquid crystal display readable under bright ambient conditions

6250 Handheld pH/mV/Ion/Temp. Meter with RS-232 Interface by Jenco

pH/mV/ION/Temp. microprocessor handheld meter in splash proof case with RS-232-C IBM compatible communications interface, BNC pH/mV/ION connector and 8-pin DIN ATC connector. AC/DC power. CE Approved.

• CE approved
• RS-232c output
• Power down backup
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• High resolution ,4 1/2 digit readout
• Highly reliable mechanical touch keys with audio feedback
• Programmable resolution to 0.001/0.1 pH,1/0.1 mv
• Direct readout in ion concentration (calibration units conform to that of the calibration standard solutions)

6350 pH/Conductivity/Salinity/mV/Temp. Handheld Meter by Jenco

The Jenco 6350 is a high performance pH/Conductivity/Salinity/mV/Temp. handheld meter in a splash proof case with an RS-232C interface that allows it to communicate with any IBM compatible PC. This meter is CE approved and features 0.01 pH Resolution and a mV range of ± Salinity is in the range of 0.0 to 80.0 ppt with a 0.0 ppt resolution. Conductivity Cells are selectable for K=1.0 or K=5.0 and ranges are selectable for uS or mS.

• pH buffer recognition: model 6350 (pH:7.00,4.01,10.01) , model 6350c (pH:6.86,4,9.18)
• Selectable 2/4 wire cells for long cable length & wide measurement range
• Store 50 sets of data in non-volatile memory
• Conductivity auto/manual range
• Power down memory backup
• Splash resistant/watertight case
• Audio feedback keys
• Battery/ac adaptor
• RS-232c output

6010M Handheld pH/ORP Meter with Memories by Jenco

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

6010N Handheld pH/ORP Meter by Jenco

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

601A pH/mV Handheld Meter by Jenco

pH/mV handheld meter with manual temperature compensation and pH calibration via knobs and pH slope calibration potentiometer. Has LCD digital display, BNC connector, voltage recorder output and reference electrode pin. AC/DC Powered.

• Liquid crystal display readable under bright ambient conditions
• Three position rocker switch for pH off mv operations
• Recorder output
• All solid state design
• High stability
• Low drift
• Fast response
• Rugged carrying case
• UL approved ac line adaptor
• One conventional 9v battery
• Extra long battery life
• Battery low indicator

6230M pH/mV/Temp. Microprocessor Handheld Meter by Jenco

pH/mV/Temp. microprocessor handheld meter in splash proof case with 3 point calibration, 40 memory storage, RS-232-C IBM compatible communication interface and BNC, pH/ORP connector with 8-pin DIN ATC connector. AC/DC power. CE Approved.

• 3 point calibration
• 40 memory storage
• Power down memories
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficients
• ATC
• RS-232c output
• CE approved
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• UL approved ac line adaptor
• Aconventional 9v battery
• Highly reliable mechanical touch keys with audio feedback

6350M pH/Conductivity/Salinity/mV/Temp. Handheld Meter with RS-232 & Memory by Jenco

The Jenco 6350 is a high performance pH/Conductivity/Salinity/mV/Temp. handheld meter in a splash proof case with an RS-232C interface that allows it to communicate with any IBM compatible PC. This meter is CE approved and features 0.01 pH Resolution and a mV range of ± Salinity is in the range of 0.0 to 80.0 ppt with a 0.0 ppt resolution. Conductivity Cells are selectable for K=1.0 or K=5.0 and ranges are selectable for uS or mS.

• pH buffer recognition: model 6350 (pH:7.00,4.01,10.01) , model 6350c (pH:6.86,4,9.18)
• Selectable 2/4 wire cells for long cable length & wide measurement range
• Store 50 sets of data in non-volatile memory
• Conductivity auto/manual range
• Power down memory backup
• Splash resistant/watertight case
• Audio feedback keys
• Battery/ac adaptor
• RS-232c output

6350N pH/Conductivity/Salinity/mV/Temp. Handheld Meter with RS-232 by Jenco

The Jenco 6350 is a high performance pH/Conductivity/Salinity/mV/Temp. handheld meter in a splash proof case with an RS-232C interface that allows it to communicate with any IBM compatible PC. This meter is CE approved and features 0.01 pH Resolution and a mV range of ± Salinity is in the range of 0.0 to 80.0 ppt with a 0.0 ppt resolution. Conductivity Cells are selectable for K=1.0 or K=5.0 and ranges are selectable for uS or mS.

• pH buffer recognition: model 6350 (pH:7.00,4.01,10.01) , model 6350c (pH:6.86,4,9.18)
• Selectable 2/4 wire cells for long cable length & wide measurement range
• Store 50 sets of data in non-volatile memory
• Conductivity auto/manual range
• Power down memory backup
• Splash resistant/watertight case
• Audio feedback keys
• Battery/ac adaptor
• RS-232c output

pH6810 VisionPlus pH/mV/Temp. Meter by Jenco

Jenco VisionPlus pH6810 is an easy to use, IP67 rated pH meter with mV and temperature readout. Key features include an IP67 rated body, 2 or 3 point calibration, electrode efficiency and manual/automatic temperature compensation.

VisionPlus pH6810 is RoHS compliant.

• Large LCD with dual display of pH and temperature or ORP and temperature
• IP67 rated water-proof and dust-proof case (optional 3-in-1 pH/ref/temperature electrode is fitted with special connectors that maintains IP67 rating)
• 2 or 3 point calibration
• Manual or automatic temperature compensation
• US or NIST buffer sets
• Electrode efficiency in percentage
• End-point sensing and auto-lock
• Dedicated operation buttons with audio feedback
• Protective, shock-proof rubber boot

pH6810N VisionPlus pH/mV/Temp. Meter by Jenco

Jenco VisionPlus pH6810 is an easy to use, IP67 rated pH meter with mV and temperature readout. Key features include an IP67 rated body, 2 or 3 point calibration, electrode efficiency and manual/automatic temperature compensation.

VisionPlus pH6810 is RoHS compliant.

• Large LCD with dual display of pH and temperature or ORP and temperature
• IP67 rated water-proof and dust-proof case (optional 3-in-1 pH/ref/temperature electrode is fitted with special connectors that maintains IP67 rating)
• 2 or 3 point calibration
• Manual or automatic temperature compensation
• US or NIST buffer sets
• Electrode efficiency in percentage
• End-point sensing and auto-lock
• Dedicated operation buttons with audio feedback
• Protective, shock-proof rubber boot