1-866-4 JJSTECH(1-866-455-7832)

Quantrol PULSAtron Plus Series T7 Pump with Integral 7 Day Timer, 30 GPD @ 100 PSI (KOPkit # K4PTC1) - LC64BA-PTC1-XXX

Item #:
LC64BA-PTC1-XXX
Brand:
Quantrol
Quantrol PULSAtron Plus Series T7 Pump with Integral 7 Day Timer, 30 GPD @ 100 PSI (KOPkit # K4PTC1) - LC64BA-PTC1-XXX
$648.00
Qty
Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
Quantrol PULSAtron Plus Series T7 Pump with Integral 7 Day Timer, 30 GPD @ 100 PSI (KOPkit # K4PTC1) - LC64BA-PTC1-XXX

Quantrol PULSAtron Plus Series T7 Pump with Integral 7 Day Timer, 30 GPD @ 100 PSI (KOPkit # K4PTC1) - LC64BA-PTC1-XXX

$648.00

LC64BA-PTC1-XXX PULSAtron Plus Series T7 Pump with Integral 7 Day Timer, 30 GPD @ 100 PSI (KOPkit # K4PTC1) by Quantrol

The Pulsatron Series T7 was designed to feed chemical products on a timed schedule. Typical applications include the feed of biocides in open-air cooling towers. The feed cycle is initiated and controlled by the programmable timer. The Series T7 provides everything you need in one unique, compact package to create a simple and cost effective metering system for timed applications.

A 7-day programmable timer controls the Series T7. The timer is programmable in 1-minute increments with up to 8 on/off cycles per day. Each timed event can be set to run any day of the week on a 7-day cycle. Other control features include a standby mode, continuous 'ON' mode and the ability to adjust the stroke length from 0 to 100%.

Four distinct models are available, having pressure capabilities to 100 PSIG (7.0 BAR) @ 12 GPD (1.9 lph), and flow capabilities to 48 GPD (7.6 lph) @ 50 PSIG (3.3 BAR), with a turndown ratio of 10:1. Metering performance is reproducible to within ± 3% of maximum capacity.

Features

  • Complete Timer Control in one unique package.
  • Solid State 7 Day Electronic Timer.
  • Isolated from Earth Ground.
  • Few Moving Parts and Wall Mountable.
  • Safe & Easy Priming with durable leak-free bleed valve assembly (standard).

Operating Benefits

  • Reliable metering performance.
  • Rated "hot" for continuous duty.
  • Leak-free, sealless, liquid end.
Specifications and Model Selection
MODEL
LC13BA
LC14BA
LC64BA
LC44BA
Capacity nominal (max.)
GPH
0.50
1.00
1.25
2.00
GPD
12
24
30
48
LPH
1.9
3.8
4.7
7.6
Pressure (max.)
PSIG
100
100
100
50
BAR
7
7
7
3.3
Connections:
Tubing
1/4" ID X 3/8" OD

Engineering Data
Pump Head Materials Available: GFPPL
PVC
PVDF
316 SS
Diaphragm: PTFE-faced CSPE-backed
Check Valves Materials Available: Seats/O-Rings: PTFE
CSPE
Viton
Balls: Ceramic
PTFE
316 SS
Alloy C
Fittings Materials Available: GFPPL
PVC
PVDF
Bleed Valve: Same as fitting and check valve selected, except 316SS
Injection Valve & Foot Valve Assy: Same as fitting and check valve selected
Tubing: Clear PVC
White PE
Reproducibility: +/- 3% at maximum capacity
Stroke Length Turn-Down Ratio: 10:1
Power Input: 115 VAC/50-60 HZ/1 ph
230 VAC/50-60 HZ/1 ph
Average Current Draw: @ 115 VAC; Amps: 0.6 Amps
@ 230 VAC; Amps: 0.3 Amps @ 230 VAC

Questions & Answers


There are no questions or answers for this item.