1-866-4 JJSTECH(1-866-455-7832)

mPower Electronics mSquad 8 Kit (1 Head and 7 Soldiers in 2 hard case), 5-gas (C02/LEL/O2-LF/CO+H2S) - M004-0055-000

Item #:
MP-M004-0055-000
Brand:
mPower Electronics
$15,472.80
Qty
Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
mPower Electronics mSquad 8 Kit (1 Head and 7 Soldiers in 2 hard case), 5-gas (C02/LEL/O2-LF/CO+H2S) - M004-0055-000

mPower Electronics mSquad 8 Kit (1 Head and 7 Soldiers in 2 hard case), 5-gas (C02/LEL/O2-LF/CO+H2S) - M004-0055-000

$15,472.80

M004-0055-000 mSquad 8 Kit (1 Head and 7 Soldiers in 2 hard case), 5-gas (C02/LEL/O2-LF/CO+H2S) by mPower Electronics

The mSquad System is a quickly-deployable set of mobile multi-gas meters that communicate wirelessly to a Squad leader up to 0.8 km (0.5 miles) distant. The system is ideal for Hazmat Response, firefighters, temporary venue protection, etc. An mSquad consists of one Head monitor (MP400H) and up to 7 Soldier monitors (MP400S) that communicate with each other. Each 4- or 5-gas monitor has options for a full range of sensors for toxic gases, oxygen (O2), combustibles (LEL) and carbon dioxide (CO2). The MP400S can also have a PID for volatile organic compounds (VOCS). In addition to high gas concentration alarms, all Squad units receive any Man-Down alarms to notify them remotely of a worker in distress. All the Squad monitors are Class I Division I certified to operate in hazardous zones. The entire mSquad is mobile, running on batteries for up to 12 hours. The MP400S and MP400H have rugged construction and easy-to-learn 2-button operation.

Features, Functions and Benefits

  • Remote, wireless real-time readings and alarms including Man-down
  • Up to 8 remote 4- or 5-gas monitors
  • Up to 0.8 km (0.5 miles) distance to Squad Head
  • All mSquad units alarm if any one unit has an alarm condition
  • Mobile system operation
  • 12-hour continuous operation on single Li-ion battery charge.
  • USB Micro cable for battery charging and direct PC communication
  • Wide selection of sensor types
MP400S and MP400H Specifications
Size 5.7 x 3.3 x 1.7 in (140 x 84 x 42 mm) w/o Antenna
Weight 15.5 oz (435 g)
Sensors Interchangeable and field-replceable: PID for VOCs (MP400S only), EC for Toxic & O2, Pellistor for LEL, and NDIR for LEL, Vol% & CO2
Response time (t90) • 15 s (LEL/CO/H2S/O2) MP400S
• 20 s (LEL/CO/H2S/O2) MP400H
• Others vary up to 120 s
Sampling MP400S - Internal pump; MP400H - Diffusion
Battery 8-36 hr (depending on sensors and pump installed)
Direct Readout • Real-time reading of gas concentration
• PID measurement gas and correction factor
• Battery status
• STEL, TWA, peak and minimum values
• Man-Down alarm on/off
Display 128 x 128 graphical LCD, 1.77 x 1.73 in (45 x 44 mm), with LED backlight and auto "flip" screen
Range 0.8 km (1/2 mile) between MP400H and MP400S
Frequency ISM band (902-928 MHz) FCC Part 15 approved
Calibration Zero and span calibration. Single or multiple sensor simultaneous calibration settings
Monitors Up to 8 per mSquad (1 MP400H plus 7 MP400S)
Alarms • Audible (95 dB @ 30 cm)
• Visual (flashing bright red LEDs)
• Vibration
• On-screen indication of alarm conditions
• Man-Down alarm and manual Panic alarm
Wireless Alarm Notification Alarm on any monitor sent to all others in mSquad for 5 seconds, then remains on at MP400H
Datalogging Continuous datalogging (6 months for 4 sensors at 1-minute intervals, 24 hours/day and 7 days/week)
Direct PC Comm and Charging USB cable for charging, data download, instrument setup and firmware upgrades on PC or 100-240V AC charger, or CaliCase.
Temperature -4° to 122°F (-20° to 50°C)
Humidity 0% to 95% Relative humidity (non-condensing)
IP Rating IP-65 MP400S (pump); IP-67 MP400H (diffusion)
EMC/RFI EMC directive: 2014/30/EU
Warranty • 2 Years on instruments
• 2 Years on sensors for pellister LEL, and O2, CO, H2S, SO2, HCN, NO, NO2, and PH3 EC sensors
• 1 Year on other sensors

Sensor Options
Sensor
Range
Resolution
PID
0-200 ppm
0-2000 ppm
0.01 ppm
0.1 ppm
Oxygen (O2)
Lead Woo: 0-30%Vol
Lead-Free: 0-30%Vol
Lead Woo: 0.1%Vol
Lead-Free: 0.1%Vol
Combustibles (LEL%)
0-100%LEL
1%LEL
Hydrocarbons (Vol%)
0-100%Vol
0.1%Vol
Dual-Range LEL%/Vol%
0-100%Vol
1%LEL
CO2 (Carbon Dioxide)
0-50000 ppm
100 ppm
CO (Carbon Monoxide)
0-1000 ppm
1 ppm
H2S (Hydrogen Sulfide)
0-100 ppm
0-1000 ppm
0.1 ppm
1 ppm
CO + H2S
CO: 0-500 ppm
H2S: 0-200 ppm
CO: 1 ppm
H2S: 0.1 ppm
SO2 + H2S
SO2: 0-20 ppm
H2S: 0-100 ppm
SO2: 0.1 ppm
H2S: 0.1 ppm
NH3 (Ammonia)
0-100 ppm
0-500 ppm
1 ppm
1 ppm
Cl2 (Chlorine)
0-50 ppm
0.1 ppm
ClO2 ( Chlorine Dioxide)
0-1 ppm
0.01 ppm
H2 (Hydrogen)
0-1000 ppm
1 ppm
HCl (Hydrogen Chloride)
0-15 ppm
0.1 ppm
HF (Hydrogen Fluoride)
0-20 ppm
0.1 ppm
HCN (Hydrogen Cyanide)
0-100 ppm
0.1 ppm
NO (Nitric Oxide)
0-250 ppm
1 ppm
NO2 (Nitrogen Dioxide)
0-20 ppm
0.1 ppm
PH3 (Phosphine)
0-20 ppm
0-1000 ppm
0.01 ppm
1 ppm
SO2 (Sulfur Dioxide)
0-20 ppm
0-100 ppm
0.1 ppm
0.1 ppm
C2H4O (Acetaldehyde)
0-20 ppm
0.1 ppm
ETO (Ethylene Oxide)
0-100 ppm
0.1 ppm
CH3SH (Methyl Mercaptan)
0-10 ppm
0.1 ppm
THT (Tetrahydrothiophene)
0-40 ppm
0.1 ppm

Typical Battery Run Times
Sensor Configuration
Monitor
Pump
Time
NDIR LEL/VOL/O2/CO/H2S
MP400H
MP400S
MP400S
None
Off
On
36 hr
36 hr
24 hr
NDIR LEL/VOL/PID/O2/CO+H2S
MP400H
MP400S
MP400S
None
Off
On
20 hr
20 hr
15 hr
Pellistor LEL/O2/CO/H2S
MP400H
MP400S
MP400S
None
Off
On
12 hr
12 hr
10 hr
Pellistor LEL/PID/O2/CO+H2S
MP400H
MP400S
MP400S
None
Off
On
10 hr
10 hr
8 hr

Datasheets & User Manuals

Questions & Answers


There are no questions or answers for this item.