1-866-4 JJSTECH(1-866-455-7832)

mPower MUNI MP425 Pre-Configured Four-Gas Detector, LEL/O2-LF/CO/H2S-Li-ion - M020-0025-000

Item #:
MP-M020-0025-000
Brand:
mPower Electronics
mPower MUNI MP425 Pre-Configured Four-Gas Detector, LEL/O2-LF/CO/H2S-Li-ion - M020-0025-000
$646.00
Qty
Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
mPower MUNI MP425 Pre-Configured Four-Gas Detector, LEL/O2-LF/CO/H2S-Li-ion - M020-0025-000

mPower MUNI MP425 Pre-Configured Four-Gas Detector, LEL/O2-LF/CO/H2S-Li-ion - M020-0025-000

$646.00

M020-0025-000 MUNI MP425 Pre-Configured Four-Gas Detector, LEL/O2-LF/CO/H2S-Li-ion by mPower Electronics

The MUNI MP420 is a compact and lightweight 4-gas detector for worker safety at hazardous locations, with four standard sensors for oxygen (O2), combustibles (LEL), carbon monoxide (CO) and hydrogen sulfide (H2S). Alternative sensors are lead free oxygen (O2), low power infrared methane (CH4), sulfur dioxide (SO2), and hydrogen cyanide (HCN). The detector is packaged in a robust housing with no moving parts. Its battery power offers 2 work shifts of run time for a standard 4-gas detector, and extended run time using a low-power infrared sensor. The simple, 2-button operation results in ultimate ease of use and significantly reduced time spent training the user.

Features, Functions and Benefits

  • Compact, robust, lightweight & wearable
  • Auto backlit LCD with large numeric digits
  • Easy-to-navigate menu with two buttons
  • Battery operation 24 hours with pellistor LEL sensor; extended time with lowpower infrared LEL sensor
  • Tri-color status indicators on regular self-diagnosis of sensor, battery & circuit
  • Wide angle LED alarms
  • 1000 Events log
  • Combination charge adapter / micro-USB PC interface cable
  • IP-68 weather ingress rating
  • Up to four replaceable sensors; non-interchangeability reduces monitor cost
  • Optional BLE wireless connectivity
  • Optional MuniDock for convenient bump & calibration
Detector Specifications
Size 4.33 x 2.36 x 1.18 in (110 x 60 x 30 mm)
Weight 8.0 oz (230 g)
Sensors • Stardard: LEL (Pellistor), O2, CO and H2S
• Alternatives: CH4 (NDIR*), O2 LF (Pb-free† ), SO2 and HCN
• Replaceable but not interchangeable
Battery Rechargeable Li-ion pack: ≥ 24 hours (with Pellistor) or extended run time (with NDIR)
Direct Readout • Real-time reading of gas concentration
• Visual compliance indicator
• Battery status
• STEL, TWA, peak and minimum values
Display Segment LCD, 1.75 x 1.25 in (44 x 32 mm) with LED backlight for enhanced readability
Keypad 2 Operation keys
Calibration Manual calibration. MuniDock option allows automatic bump test and calibration
Alarms • Audible (95 dB @ 30 cm)
• Visual (tri-color LEDs)
• Vibration
Datalogging 1000 Events (alarms, function tests and calibrations)
Charging and Communication • Charging with AC adapter or cable to PC
• PC comm for data download, monitor setup & firmware upgrades via cable, optional BLE (Bluetooth Low Energy), or MuniDock
Temperature -4° to 122°F (-20° to 50°C)
Humidity 0% to 95% Relative humidity (non-condensing)
IP Rating IP-68
Warranty 2 Years including sensors
3 Years with CH4(NDIR)/O2(Lead-free)/H2S/CO

Sensor Information
Sensor*
Resolution & Range
Response Time (t90)
1. Combustibles
(Pellistor)
or (NDIR)†
1 - 100% LEL
1 - 100% LEL CH4
15 sec
30 sec
2. Oxygen (O2)
(Galvanic)
or (Lead-free)
0.1 - 30.0% Vol
0.1 - 30.0% Vol
15 sec
15 sec
3. Hydrogen Sulfide (H2S) or
Hydrogen Cyanide (HCN)
0.1 - 100 ppm
0.1 - 50.0 ppm
15 sec
45 sec
4. Carbon Monoxide (CO) or
Sulfur Dioxide (SO2)
1 - 1000 ppm
0.1 - 20.0 ppm
15 sec
30 sec
* Sensors are replaceable but NOT interchangeable. Sensor configuration must be decided at time of purchase because each configuration has a unique circuit board.
† NDIR CH4 sensor detects methane and most hydrocarbons, but not some combustible gases such as hydrogen, acetylene and carbon disulfide. Contact mPower for assessment or approval for use in practical applications.
† Pb-free (Lead-free) O2 sensor has a longer life span than the galvanic version, but requires more battery power

Questions & Answers