- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Gas Monitor Categories
- Single-Gas Monitors
- Multi-Gas Monitors
- Zero Maintenance Monitors
- Fixed System Gas Monitors
- Confined Space Kits
- Wireless Fixed Point Gas Detectors
- Hydrogen Sulfide (H2S) Monitors
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Milwaukee MC410 TDS - PPM Monitor
Item #:
MW-MC410
Brand:
Milwaukee
Share this product:
MC410 TDS - PPM Monitor by Milwaukee
The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point.
All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution.
- User selectable Hi/Low Set Point
- Manual 1 points calibration
- Visual LED alarm
- Supplied with 12 VDC adapter, mounting kit, and 20ml 1382ppm calibration solution
- MA81/2 PPM Probe with 2m cable (BNC connector)
| Range | EC/TDS: 0 to 1990 ppm |
| Resolution | EC/TDS: 10 ppm |
| Accuracy (@25°C) | ±2% Full Scale |
| Conversion Factor | 0.7 |
| Set point | 100 to 1900 ppm |
| Alarm | active when the measurement is higher/lower than the set point |
| Temperature Compensation | automatic, from 5 to 50°C |
| Environment | 0 to 50°C; max RH 95% |
| Probe | MA812/2 (included) |
| Power Supply | 12 VDC power adapter (included) |
| Dimensions | 148.5 x 82.5 x 32 mm |
| Weight | 180 g (meter only) |
