Seko Tekna Series Solenoid Driven Metering Pumps

AKL500NHH0U00U Seko Tekna Series Solenoid Driven Metering Pump, AKL Series PVDF/FPM, 5 GPD @ 232PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

AKL Series

• On/Off Switch
• Adjustable output via stroke frequency
• Dual strokes per minute scales for improved low flow resolution
• Power on LED indicator

AKL603NHH0U00U Seko Tekna Series Solenoid Driven Metering Pump, AKL Series PVDF/FPM, 25 GPD @ 174PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

AKL Series

• On/Off Switch
• Adjustable output via stroke frequency
• Dual strokes per minute scales for improved low flow resolution
• Power on LED indicator

AKL800NHH0U00U Seko Tekna Series Solenoid Driven Metering Pump, AKL Series PVDF/FPM, 44 GPD @ 232PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

AKL Series

• On/Off Switch
• Adjustable output via stroke frequency
• Dual strokes per minute scales for improved low flow resolution
• Power on LED indicator

AKL803NHH0U00U Seko Tekna Series Solenoid Driven Metering Pump, AKL Series PVDF/FPM, 127 GPD @ 72PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

AKL Series

• On/Off Switch
• Adjustable output via stroke frequency
• Dual strokes per minute scales for improved low flow resolution
• Power on LED indicator

AKL500NHH1U00U Seko Tekna Series Solenoid Driven Metering Pump, AKL Series PVDF/EPDM, 5 GPD @ 232PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

AKL Series

• On/Off Switch
• Adjustable output via stroke frequency
• Dual strokes per minute scales for improved low flow resolution
• Power on LED indicator

AKL603NHH1U00U Seko Tekna Series Solenoid Driven Metering Pump, AKL Series PVDF/EPDM, 25 GPD @ 174PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

AKL Series

• On/Off Switch
• Adjustable output via stroke frequency
• Dual strokes per minute scales for improved low flow resolution
• Power on LED indicator

AKL800NHH1U00U Seko Tekna Series Solenoid Driven Metering Pump, AKL Series PVDF/EPDM, 44 GPD @ 232PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

AKL Series

• On/Off Switch
• Adjustable output via stroke frequency
• Dual strokes per minute scales for improved low flow resolution
• Power on LED indicator

AKL803NHH1U00U Seko Tekna Series Solenoid Driven Metering Pump, AKL Series PVDF/EPDM, 127 GPD @ 72PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

AKL Series

• On/Off Switch
• Adjustable output via stroke frequency
• Dual strokes per minute scales for improved low flow resolution
• Power on LED indicator

AKL603NAH0U00 Seko Tekna Series Solenoid Driven Metering Pump, AKL Series PVDF/FPM Degassing, 25 GPD @ 174PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

AKL Series

• On/Off Switch
• Adjustable output via stroke frequency
• Dual strokes per minute scales for improved low flow resolution
• Power on LED indicator

AKL800NAH0U00 Seko Tekna Series Solenoid Driven Metering Pump, AKL Series PVDF/FPM Degassing, 44 GPD @ 232PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

AKL Series

• On/Off Switch
• Adjustable output via stroke frequency
• Dual strokes per minute scales for improved low flow resolution
• Power on LED indicator

TPR603NHH0U00 Seko Tekna Series Solenoid Driven Metering Pump, TPR Series with Proportional pH or ORP Control, PVDF/FPM, 25 GPD @ 174PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

TPR Digital Series

• Built in pH or ORP control
• Proportional control, overfeed and alarm setting
• Alarm dry contact output
• Alarm and stroke LED indicators
• Remote Start/Stop input
• 4-20mA output

TPR800NHH0U00 Seko Tekna Series Solenoid Driven Metering Pump, TPR Series with Proportional pH or ORP Control, PVDF/FPM, 44 GPD @ 232PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

TPR Digital Series

• Built in pH or ORP control
• Proportional control, overfeed and alarm setting
• Alarm dry contact output
• Alarm and stroke LED indicators
• Remote Start/Stop input
• 4-20mA output

TPR603NHH1U00 Seko Tekna Series Solenoid Driven Metering Pump, TPR Series with Proportional pH or ORP Control, PVDF/EPDM, 25 GPD @ 174PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

TPR Digital Series

• Built in pH or ORP control
• Proportional control, overfeed and alarm setting
• Alarm dry contact output
• Alarm and stroke LED indicators
• Remote Start/Stop input
• 4-20mA output

TPR800NHH1U00 Seko Tekna Series Solenoid Driven Metering Pump, TPR Series with Proportional pH or ORP Control, PVDF/EPDM, 44 GPD @ 232PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

TPR Digital Series

• Built in pH or ORP control
• Proportional control, overfeed and alarm setting
• Alarm dry contact output
• Alarm and stroke LED indicators
• Remote Start/Stop input
• 4-20mA output

pH Sensor, Flat, 3/4" NPT, PPS, 10' Cable with BNC

ORP Sensor, 3/4" NPT, PPS, 10' Cable with BNC

TPG500NHH0U00U Seko Tekna Series Solenoid Driven Metering Pump, TPG Digital Series PVDF/FPM for Most Chemicals, 5 GPD @ 232PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

TPR Digital Series

• Built in pH or ORP control
• Proportional control, overfeed and alarm setting
• Alarm dry contact output
• Alarm and stroke LED indicators
• Remote Start/Stop input
• 4-20mA output

TPG603NHH0U00U Seko Tekna Series Solenoid Driven Metering Pump, TPG Digital Series PVDF/FPM for Most Chemicals, 25 GPD @ 174PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

TPR Digital Series

• Built in pH or ORP control
• Proportional control, overfeed and alarm setting
• Alarm dry contact output
• Alarm and stroke LED indicators
• Remote Start/Stop input
• 4-20mA output

TPG800NHH0U00U Seko Tekna Series Solenoid Driven Metering Pump, TPG Digital Series PVDF/FPM for Most Chemicals, 44 GPD @ 232PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

TPR Digital Series

• Built in pH or ORP control
• Proportional control, overfeed and alarm setting
• Alarm dry contact output
• Alarm and stroke LED indicators
• Remote Start/Stop input
• 4-20mA output

TPG803NHH0U00U Seko Tekna Series Solenoid Driven Metering Pump, TPG Digital Series PVDF/FPM for Most Chemicals, 127 GPD @ 72PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

TPR Digital Series

• Built in pH or ORP control
• Proportional control, overfeed and alarm setting
• Alarm dry contact output
• Alarm and stroke LED indicators
• Remote Start/Stop input
• 4-20mA output

TPG500NHH1U00U Seko Tekna Series Solenoid Driven Metering Pump, TPG Digital Series PVDF/EPDM for Sodium Hydroxide, 5 GPD @ 232PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

TPR Digital Series

• Built in pH or ORP control
• Proportional control, overfeed and alarm setting
• Alarm dry contact output
• Alarm and stroke LED indicators
• Remote Start/Stop input
• 4-20mA output

TPG603NHH1U00U Seko Tekna Series Solenoid Driven Metering Pump, TPG Digital Series PVDF/EPDM for Sodium Hydroxide, 25 GPD @ 174PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

TPR Digital Series

• Built in pH or ORP control
• Proportional control, overfeed and alarm setting
• Alarm dry contact output
• Alarm and stroke LED indicators
• Remote Start/Stop input
• 4-20mA output

TPG800NHH1U00U Seko Tekna Series Solenoid Driven Metering Pump, TPG Digital Series PVDF/EPDM for Sodium Hydroxide, 44 GPD @ 232PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

TPR Digital Series

• Built in pH or ORP control
• Proportional control, overfeed and alarm setting
• Alarm dry contact output
• Alarm and stroke LED indicators
• Remote Start/Stop input
• 4-20mA output

TPG803NHH1U00U Seko Tekna Series Solenoid Driven Metering Pump, TPG Digital Series PVDF/EPDM for Sodium Hydroxide, 127 GPD @ 72PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

TPR Digital Series

• Built in pH or ORP control
• Proportional control, overfeed and alarm setting
• Alarm dry contact output
• Alarm and stroke LED indicators
• Remote Start/Stop input
• 4-20mA output