QRAE II Accessories, Sensors, and Replacement Parts

Carbon Monoxide Sensor

Combustible %LEL Sensor

Hydrogen Sulfide Sensor 0,1-100 ppm

Oxygen SPE Sensor

Calibration / Flow through Adapter

Charging / Download Station for QRAE II (without charger & cable)

Multi-unit Charger (5 QRAE II cradles)

Re-chargeable Lithium-ion Battery

Alkaline Battery Adapter

Computer Interface Cable 9 Pin Male to Female

Cable Adapter (USB to serial)

Constant-Flow Regulator, 1 L / min with Tubing

Dust Filter (pack of 5) for Diffusion Model

Dust Filter (pack of 25) for Pumped Model (SN>181-138374)

Dust Filter (pack of 25) for Pumped Model (SN<181-138374)

Gas Plate (pack of 2) for Pumped Version (SN>181-138374)

Gas Plate (pack of 2) for Pumped Version (SN<181-138374)

Gas Plate (pack of 2) for Diffusion Version

Protective Leather Case with Strap for QRAE II

CD, QRAE II

T01-0001-000 AutoRAE Lite for QRAE II Bump Test and Calibration Station by RAE Systems

The AutoRAE Lite high-speed, low-operating-cost bump test and calibration station stores data in a text file that can be opened by any spreadsheet software or text editor.

In addition, the AutoRAE Lite operates on a low-pressure system with a built-in pump.

AutoRAE Lite includes

• AutoRAE Lite as specified
• USB cable for PC set up
• Universal power supply
• Demand-flow regulator (installed)
• SD memory card 512MB
• Quick-start guide
• Inlet filter
• Diffusion adapter
• CD includes: Operation manual, Drivers, Utility software

Key Features

• Fully automated bump and calibration
• Bump test in 12 seconds
• Full calibration in 2 minutes
• Tamper-proof data files
• Configures monitor
• "No gas flow" alarm
• Demand-flow system with included regulator

Applications

• Emergency response
• Environmental
• Fire service
• Industrial safety
• Oil and gas

External 25 mm Filters (Pack of 10) (without Adapter)

020-0040-010 Confined Space Kit 1 by RAE Systems

Confined Space Kit 1 includes

• Hard transport case with pre-cut foam
• Tool Kit
• Hand pump
• 10" stiff aluminum Sample probe with replaceable filter
• 6 feet (2 meters) Tygon® tubing
• External filter (pack of 3)

020-0040-020 Confined Space Kit 2 by RAE Systems

Confined Space Kit 1 includes

• Four-gas mix in a 34L cylinder (50% LEL, 18% O2, 10 ppm Hydrogen Sulfide, 50 ppm Carbon Monoxide)
• Regulator and tubing

Pump Assembly

Dummy Sensor 4R Format (Pack of 5)

Dummy Sensor Transparent 3R Format (Pack of 5)

AC Adapter with International Prong Kit (for single-unit charging and PC communications cradle)

600-0050-007 Four-Gas Calibration Mix, 34L Aluminum Cylinder (50%LEL / 2.5% Vol CH4,18% O2,10 PPM H2S, 50 PPM CO, Balance N2) by RAE Systems

Standard single-gas and multi-gas mixtures for monitor calibration

• Sizes range from 11 liters to 103 liters
• Convenient multi-gas mixtures
• Choose between demand-flow and constant-flow regulators

Gas Plate (pack of 2) for Diffusion Version

Re-chargeable Lithium-ion Battery

Multi-unit Charger (5 QRAE II cradles)

Dust Filter (pack of 25) for Pumped Model (SN<181-138374)

Oxygen SPE Sensor

Computer Interface Cable 9 Pin Male to Female

CD, QRAE II

Dust Filter (pack of 5) for Diffusion Model

Gas Plate (pack of 2) for Pumped Version (SN>181-138374)

Dust Filter (pack of 25) for Pumped Model (SN>181-138374)

Alkaline Battery Adapter

Protective Leather Case with Strap for QRAE II

Combustible %LEL Sensor

Calibration / Flow through Adapter

Hydrogen Sulfide Sensor 0,1-100 ppm

Charging / Download Station for QRAE II (without charger & cable)

Cable Adapter (USB to serial)

Carbon Monoxide Sensor

Pump Assembly