1-866-4 JJSTECH(1-866-455-7832)

  1. Home
  2. RKI Instruments
  3. Beacon 410A
  4. Beacon 410A Four Channel Wall Mount Controllers

Beacon 410A Four Channel Wall Mount Controllers

Results: 1-14 of 14
Filter by Category
Items per page:
Sort by:
  1. RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Battery Charging and Strobe/Horn - 72-2104A-06QUICK VIEW

    RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Battery Charging and Strobe/Horn - 72-2104A-06

    Brand: RKI Instruments | Item #: 72-2104A-06

    $3,475.50
  2. RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Standard Basic Unit with Amber (Alarm 1) & Red (Alarm 2) Federal Streamline LP3 Strobes - 72-2104A-08QUICK VIEW

    RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Standard Basic Unit with Amber (Alarm 1) & Red (Alarm 2) Federal Streamline LP3 Strobes - 72-2104A-08

    Brand: RKI Instruments | Item #: 72-2104A-08

    $3,857.70
  3. RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Ingram Red Strobe without Battery Charging - 72-2104A-09QUICK VIEW

    RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Ingram Red Strobe without Battery Charging - 72-2104A-09

    Brand: RKI Instruments | Item #: 72-2104A-09

    $3,336.90
  4. RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Ingram Red Strobe with Battery Charging - 72-2104A-10QUICK VIEW

    RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Ingram Red Strobe with Battery Charging - 72-2104A-10

    Brand: RKI Instruments | Item #: 72-2104A-10

    $3,416.70
  5. RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Battery Charging with Amber (Alarm 1) & Red (Alarm 2) Strobes (Ingram) - 72-2104A-11-02QUICK VIEW

    RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Battery Charging with Amber (Alarm 1) & Red (Alarm 2) Strobes (Ingram) - 72-2104A-11-02

    Brand: RKI Instruments | Item #: 72-2104A-11-02

    $3,613.05
  6. RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Large Amber Strobe, without Battery Charging - 72-2104A-13AQUICK VIEW

    RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Large Amber Strobe, without Battery Charging - 72-2104A-13A

    Brand: RKI Instruments | Item #: 72-2104A-13A

    $3,555.30
  7. RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Large Amber Strobe, with Battery Charging - 72-2104A-13A-01QUICK VIEW

    RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Large Amber Strobe, with Battery Charging - 72-2104A-13A-01

    Brand: RKI Instruments | Item #: 72-2104A-13A-01

    $3,613.05
  8. RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Large Blue Strobe, without Battery Charging - 72-2104A-13BQUICK VIEW

    RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Large Blue Strobe, without Battery Charging - 72-2104A-13B

    Brand: RKI Instruments | Item #: 72-2104A-13B

    $3,501.75
  9. RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Large Blue Strobe and Battery Charging - 72-2104A-14BQUICK VIEW

    RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Large Blue Strobe and Battery Charging - 72-2104A-14B

    Brand: RKI Instruments | Item #: 72-2104A-14B

    $3,613.05
  10. RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Basic Unit, Horn/Strobe, 2 LEL/2 H2S Detectors without Cables (spec. on order), with AC Cord - 72-2104A-HLR-02QUICK VIEW

    RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Basic Unit, Horn/Strobe, 2 LEL/2 H2S Detectors without Cables (spec. on order), with AC Cord - 72-2104A-HLR-02

    Brand: RKI Instruments | Item #: 72-2104A-HLR-02

    $5,897.85
  11. RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Basic Unit, Horn/Strobe on top, 2 LEL/2 H2S det without Cables (spec. on order), with AC Cord - 72-2104A-HLR-03QUICK VIEW

    RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Basic Unit, Horn/Strobe on top, 2 LEL/2 H2S det without Cables (spec. on order), with AC Cord - 72-2104A-HLR-03

    Brand: RKI Instruments | Item #: 72-2104A-HLR-03

    $5,897.85
  12. RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Basic Unit with 12 VDC Operation & Horn/Strobe, 4 H2S Sensors on 150 ft Cables - 72-2104A-HR-03QUICK VIEW

    RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Basic Unit with 12 VDC Operation & Horn/Strobe, 4 H2S Sensors on 150 ft Cables - 72-2104A-HR-03

    Brand: RKI Instruments | Item #: 72-2104A-HR-03

    $7,029.75
  13. RKI Instruments Beacon 410A Four Channel Wall Mount Controller, with Battery Charging, Amber (alm1) & Red (alm2) Federal Streamline LP3 Strobes - 72-2104A-08-01QUICK VIEW

    RKI Instruments Beacon 410A Four Channel Wall Mount Controller, with Battery Charging, Amber (alm1) & Red (alm2) Federal Streamline LP3 Strobes - 72-2104A-08-01

    Brand: RKI Instruments | Item #: 72-2104A-08-01

    $3,911.25
  14. RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Standard Basic Unit for 12 VDC Operation - 72-2104A-12QUICK VIEW

    RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Standard Basic Unit for 12 VDC Operation - 72-2104A-12

    Brand: RKI Instruments | Item #: 72-2104A-12

    $3,007.20
RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Battery Charging and Strobe/Horn - 72-2104A-06
View Product Details >

RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Battery Charging and Strobe/Horn - 72-2104A-06




Item #72-2104A-06
BrandRKI Instruments
Price: $3,475.50
Quantity:

72-2104A-06 Beacon 410A Four Channel Wall Mount Controller with Battery Charging and Strobe/Horn by RKI Instruments

The Beacon 410A is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitoring controller. It simultaneously displays the gas type, readings, and status for four channels of gas detection. It can monitor any combination of direct connect sensors (LEL, O2, CO2, and toxic gas sensors), as well as any 4-20mA transmitter.

Each channel has up to three fully configurable alarm points. A built-in silenceable audible alarm alerts you to alarm conditions. Each channel also has two dedicated fully configurable relays and there is a bank of common relays as well. The common relays can optionally be configured as additional relays allowing up to 3 alarm relays per channel. Each channel provides a 4-20mA output signal. A digital Modbus interface for remote logging of data via a Modbus network is standard. A Min-Max feature retains high & low peak readings for review at any time.

A fully configurable, high visibility strobe is available as an option. The unit can be powered from 115/220 VAC, or an external 24 VDC source. A trickle charging battery backup feature with battery assembly is also available as an option.

All features and functions of the Beacon 410A are controlled by easy to use menus on the OLED display. All features including form-C relay contacts of the Beacon 410A are built into the unit so you never need to purchase or maintain any "add-on" cards or components.

Features

  • Simultaneously control up to 4 gas monitoring channels
  • OLED display of all 4 channels
  • LEL / O2 / CO2 / toxic direct connect sensors
  • Accepts any 4-20 mA transmitter, 2 or 3 wire
  • Up to 3 programmable alarm levels per channel
  • Up to 3 configurable alarm relays per channel
  • 4-20 mA analog & Modbus digital output standard
  • 115 / 220 VAC or 24 VDC operation
  • Audible alarm with silence feature
  • RFI / EMI Resistant
  • Alarm reset switch
  • Built in trouble alarm with relay
  • Weather and corrosion resistant NEMA 4X enclosure

Industry Applications

  • Petrochemical plants
  • Refineries
  • Water & wastewater treatment plants
  • Pulp & paper mills
  • Gas, telephone, & electric utilities
  • Parking garages
  • Manufacturing facilities
  • Steel

*Please note we can only ship RKI products to customers within the United States

RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Standard Basic Unit with Amber (Alarm 1) & Red (Alarm 2) Federal Streamline LP3 Strobes - 72-2104A-08
View Product Details >

RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Standard Basic Unit with Amber (Alarm 1) & Red (Alarm 2) Federal Streamline LP3 Strobes - 72-2104A-08




Item #72-2104A-08
BrandRKI Instruments
Price: $3,857.70
Quantity:

72-2104A-08 Beacon 410A Four Channel Wall Mount Controller, Standard Basic Unit with Amber (Alarm 1) & Red (Alarm 2) Federal Streamline LP3 Strobes by RKI Instruments

The Beacon 410A is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitoring controller. It simultaneously displays the gas type, readings, and status for four channels of gas detection. It can monitor any combination of direct connect sensors (LEL, O2, CO2, and toxic gas sensors), as well as any 4-20mA transmitter.

Each channel has up to three fully configurable alarm points. A built-in silenceable audible alarm alerts you to alarm conditions. Each channel also has two dedicated fully configurable relays and there is a bank of common relays as well. The common relays can optionally be configured as additional relays allowing up to 3 alarm relays per channel. Each channel provides a 4-20mA output signal. A digital Modbus interface for remote logging of data via a Modbus network is standard. A Min-Max feature retains high & low peak readings for review at any time.

A fully configurable, high visibility strobe is available as an option. The unit can be powered from 115/220 VAC, or an external 24 VDC source. A trickle charging battery backup feature with battery assembly is also available as an option.

All features and functions of the Beacon 410A are controlled by easy to use menus on the OLED display. All features including form-C relay contacts of the Beacon 410A are built into the unit so you never need to purchase or maintain any "add-on" cards or components.

Features

  • Simultaneously control up to 4 gas monitoring channels
  • OLED display of all 4 channels
  • LEL / O2 / CO2 / toxic direct connect sensors
  • Accepts any 4-20 mA transmitter, 2 or 3 wire
  • Up to 3 programmable alarm levels per channel
  • Up to 3 configurable alarm relays per channel
  • 4-20 mA analog & Modbus digital output standard
  • 115 / 220 VAC or 24 VDC operation
  • Audible alarm with silence feature
  • RFI / EMI Resistant
  • Alarm reset switch
  • Built in trouble alarm with relay
  • Weather and corrosion resistant NEMA 4X enclosure

Industry Applications

  • Petrochemical plants
  • Refineries
  • Water & wastewater treatment plants
  • Pulp & paper mills
  • Gas, telephone, & electric utilities
  • Parking garages
  • Manufacturing facilities
  • Steel

*Please note we can only ship RKI products to customers within the United States

RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Ingram Red Strobe without Battery Charging - 72-2104A-09
View Product Details >

RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Ingram Red Strobe without Battery Charging - 72-2104A-09




Item #72-2104A-09
BrandRKI Instruments
Price: $3,336.90
Quantity:

72-2104A-09 Beacon 410A Four Channel Wall Mount Controller with Ingram Red Strobe without Battery Charging by RKI Instruments

The Beacon 410A is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitoring controller. It simultaneously displays the gas type, readings, and status for four channels of gas detection. It can monitor any combination of direct connect sensors (LEL, O2, CO2, and toxic gas sensors), as well as any 4-20mA transmitter.

Each channel has up to three fully configurable alarm points. A built-in silenceable audible alarm alerts you to alarm conditions. Each channel also has two dedicated fully configurable relays and there is a bank of common relays as well. The common relays can optionally be configured as additional relays allowing up to 3 alarm relays per channel. Each channel provides a 4-20mA output signal. A digital Modbus interface for remote logging of data via a Modbus network is standard. A Min-Max feature retains high & low peak readings for review at any time.

A fully configurable, high visibility strobe is available as an option. The unit can be powered from 115/220 VAC, or an external 24 VDC source. A trickle charging battery backup feature with battery assembly is also available as an option.

All features and functions of the Beacon 410A are controlled by easy to use menus on the OLED display. All features including form-C relay contacts of the Beacon 410A are built into the unit so you never need to purchase or maintain any "add-on" cards or components.

Features

  • Simultaneously control up to 4 gas monitoring channels
  • OLED display of all 4 channels
  • LEL / O2 / CO2 / toxic direct connect sensors
  • Accepts any 4-20 mA transmitter, 2 or 3 wire
  • Up to 3 programmable alarm levels per channel
  • Up to 3 configurable alarm relays per channel
  • 4-20 mA analog & Modbus digital output standard
  • 115 / 220 VAC or 24 VDC operation
  • Audible alarm with silence feature
  • RFI / EMI Resistant
  • Alarm reset switch
  • Built in trouble alarm with relay
  • Weather and corrosion resistant NEMA 4X enclosure

Industry Applications

  • Petrochemical plants
  • Refineries
  • Water & wastewater treatment plants
  • Pulp & paper mills
  • Gas, telephone, & electric utilities
  • Parking garages
  • Manufacturing facilities
  • Steel

*Please note we can only ship RKI products to customers within the United States

RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Ingram Red Strobe with Battery Charging - 72-2104A-10
View Product Details >

RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Ingram Red Strobe with Battery Charging - 72-2104A-10




Item #72-2104A-10
BrandRKI Instruments
Price: $3,416.70
Quantity:

72-2104A-10 Beacon 410A Four Channel Wall Mount Controller with Ingram Red Strobe with Battery Charging by RKI Instruments

The Beacon 410A is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitoring controller. It simultaneously displays the gas type, readings, and status for four channels of gas detection. It can monitor any combination of direct connect sensors (LEL, O2, CO2, and toxic gas sensors), as well as any 4-20mA transmitter.

Each channel has up to three fully configurable alarm points. A built-in silenceable audible alarm alerts you to alarm conditions. Each channel also has two dedicated fully configurable relays and there is a bank of common relays as well. The common relays can optionally be configured as additional relays allowing up to 3 alarm relays per channel. Each channel provides a 4-20mA output signal. A digital Modbus interface for remote logging of data via a Modbus network is standard. A Min-Max feature retains high & low peak readings for review at any time.

A fully configurable, high visibility strobe is available as an option. The unit can be powered from 115/220 VAC, or an external 24 VDC source. A trickle charging battery backup feature with battery assembly is also available as an option.

All features and functions of the Beacon 410A are controlled by easy to use menus on the OLED display. All features including form-C relay contacts of the Beacon 410A are built into the unit so you never need to purchase or maintain any "add-on" cards or components.

Features

  • Simultaneously control up to 4 gas monitoring channels
  • OLED display of all 4 channels
  • LEL / O2 / CO2 / toxic direct connect sensors
  • Accepts any 4-20 mA transmitter, 2 or 3 wire
  • Up to 3 programmable alarm levels per channel
  • Up to 3 configurable alarm relays per channel
  • 4-20 mA analog & Modbus digital output standard
  • 115 / 220 VAC or 24 VDC operation
  • Audible alarm with silence feature
  • RFI / EMI Resistant
  • Alarm reset switch
  • Built in trouble alarm with relay
  • Weather and corrosion resistant NEMA 4X enclosure

Industry Applications

  • Petrochemical plants
  • Refineries
  • Water & wastewater treatment plants
  • Pulp & paper mills
  • Gas, telephone, & electric utilities
  • Parking garages
  • Manufacturing facilities
  • Steel

*Please note we can only ship RKI products to customers within the United States

RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Battery Charging with Amber (Alarm 1) & Red (Alarm 2) Strobes (Ingram) - 72-2104A-11-02
View Product Details >

RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Battery Charging with Amber (Alarm 1) & Red (Alarm 2) Strobes (Ingram) - 72-2104A-11-02




Item #72-2104A-11-02
BrandRKI Instruments
Price: $3,613.05
Quantity:

72-2104A-11-02 Beacon 410A Four Channel Wall Mount Controller with Battery Charging with Amber (Alarm 1) & Red (Alarm 2) Strobes (Ingram) by RKI Instruments

The Beacon 410A is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitoring controller. It simultaneously displays the gas type, readings, and status for four channels of gas detection. It can monitor any combination of direct connect sensors (LEL, O2, CO2, and toxic gas sensors), as well as any 4-20mA transmitter.

Each channel has up to three fully configurable alarm points. A built-in silenceable audible alarm alerts you to alarm conditions. Each channel also has two dedicated fully configurable relays and there is a bank of common relays as well. The common relays can optionally be configured as additional relays allowing up to 3 alarm relays per channel. Each channel provides a 4-20mA output signal. A digital Modbus interface for remote logging of data via a Modbus network is standard. A Min-Max feature retains high & low peak readings for review at any time.

A fully configurable, high visibility strobe is available as an option. The unit can be powered from 115/220 VAC, or an external 24 VDC source. A trickle charging battery backup feature with battery assembly is also available as an option.

All features and functions of the Beacon 410A are controlled by easy to use menus on the OLED display. All features including form-C relay contacts of the Beacon 410A are built into the unit so you never need to purchase or maintain any "add-on" cards or components.

Features

  • Simultaneously control up to 4 gas monitoring channels
  • OLED display of all 4 channels
  • LEL / O2 / CO2 / toxic direct connect sensors
  • Accepts any 4-20 mA transmitter, 2 or 3 wire
  • Up to 3 programmable alarm levels per channel
  • Up to 3 configurable alarm relays per channel
  • 4-20 mA analog & Modbus digital output standard
  • 115 / 220 VAC or 24 VDC operation
  • Audible alarm with silence feature
  • RFI / EMI Resistant
  • Alarm reset switch
  • Built in trouble alarm with relay
  • Weather and corrosion resistant NEMA 4X enclosure

Industry Applications

  • Petrochemical plants
  • Refineries
  • Water & wastewater treatment plants
  • Pulp & paper mills
  • Gas, telephone, & electric utilities
  • Parking garages
  • Manufacturing facilities
  • Steel

*Please note we can only ship RKI products to customers within the United States

RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Large Amber Strobe, without Battery Charging - 72-2104A-13A
View Product Details >

RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Large Amber Strobe, without Battery Charging - 72-2104A-13A




Item #72-2104A-13A
BrandRKI Instruments
Price: $3,555.30
Quantity:

72-2104A-13A Beacon 410A Four Channel Wall Mount Controller with Large Amber Strobe, without Battery Charging by RKI Instruments

The Beacon 410A is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitoring controller. It simultaneously displays the gas type, readings, and status for four channels of gas detection. It can monitor any combination of direct connect sensors (LEL, O2, CO2, and toxic gas sensors), as well as any 4-20mA transmitter.

Each channel has up to three fully configurable alarm points. A built-in silenceable audible alarm alerts you to alarm conditions. Each channel also has two dedicated fully configurable relays and there is a bank of common relays as well. The common relays can optionally be configured as additional relays allowing up to 3 alarm relays per channel. Each channel provides a 4-20mA output signal. A digital Modbus interface for remote logging of data via a Modbus network is standard. A Min-Max feature retains high & low peak readings for review at any time.

A fully configurable, high visibility strobe is available as an option. The unit can be powered from 115/220 VAC, or an external 24 VDC source. A trickle charging battery backup feature with battery assembly is also available as an option.

All features and functions of the Beacon 410A are controlled by easy to use menus on the OLED display. All features including form-C relay contacts of the Beacon 410A are built into the unit so you never need to purchase or maintain any "add-on" cards or components.

Features

  • Simultaneously control up to 4 gas monitoring channels
  • OLED display of all 4 channels
  • LEL / O2 / CO2 / toxic direct connect sensors
  • Accepts any 4-20 mA transmitter, 2 or 3 wire
  • Up to 3 programmable alarm levels per channel
  • Up to 3 configurable alarm relays per channel
  • 4-20 mA analog & Modbus digital output standard
  • 115 / 220 VAC or 24 VDC operation
  • Audible alarm with silence feature
  • RFI / EMI Resistant
  • Alarm reset switch
  • Built in trouble alarm with relay
  • Weather and corrosion resistant NEMA 4X enclosure

Industry Applications

  • Petrochemical plants
  • Refineries
  • Water & wastewater treatment plants
  • Pulp & paper mills
  • Gas, telephone, & electric utilities
  • Parking garages
  • Manufacturing facilities
  • Steel

*Please note we can only ship RKI products to customers within the United States

RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Large Amber Strobe, with Battery Charging - 72-2104A-13A-01
View Product Details >

RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Large Amber Strobe, with Battery Charging - 72-2104A-13A-01




Item #72-2104A-13A-01
BrandRKI Instruments
Price: $3,613.05
Quantity:

72-2104A-13A-01 Beacon 410A Four Channel Wall Mount Controller with Large Amber Strobe, with Battery Charging by RKI Instruments

The Beacon 410A is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitoring controller. It simultaneously displays the gas type, readings, and status for four channels of gas detection. It can monitor any combination of direct connect sensors (LEL, O2, CO2, and toxic gas sensors), as well as any 4-20mA transmitter.

Each channel has up to three fully configurable alarm points. A built-in silenceable audible alarm alerts you to alarm conditions. Each channel also has two dedicated fully configurable relays and there is a bank of common relays as well. The common relays can optionally be configured as additional relays allowing up to 3 alarm relays per channel. Each channel provides a 4-20mA output signal. A digital Modbus interface for remote logging of data via a Modbus network is standard. A Min-Max feature retains high & low peak readings for review at any time.

A fully configurable, high visibility strobe is available as an option. The unit can be powered from 115/220 VAC, or an external 24 VDC source. A trickle charging battery backup feature with battery assembly is also available as an option.

All features and functions of the Beacon 410A are controlled by easy to use menus on the OLED display. All features including form-C relay contacts of the Beacon 410A are built into the unit so you never need to purchase or maintain any "add-on" cards or components.

Features

  • Simultaneously control up to 4 gas monitoring channels
  • OLED display of all 4 channels
  • LEL / O2 / CO2 / toxic direct connect sensors
  • Accepts any 4-20 mA transmitter, 2 or 3 wire
  • Up to 3 programmable alarm levels per channel
  • Up to 3 configurable alarm relays per channel
  • 4-20 mA analog & Modbus digital output standard
  • 115 / 220 VAC or 24 VDC operation
  • Audible alarm with silence feature
  • RFI / EMI Resistant
  • Alarm reset switch
  • Built in trouble alarm with relay
  • Weather and corrosion resistant NEMA 4X enclosure

Industry Applications

  • Petrochemical plants
  • Refineries
  • Water & wastewater treatment plants
  • Pulp & paper mills
  • Gas, telephone, & electric utilities
  • Parking garages
  • Manufacturing facilities
  • Steel

*Please note we can only ship RKI products to customers within the United States

RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Large Blue Strobe, without Battery Charging - 72-2104A-13B
View Product Details >

RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Large Blue Strobe, without Battery Charging - 72-2104A-13B




Item #72-2104A-13B
BrandRKI Instruments
Price: $3,501.75
Quantity:

72-2104A-13B Beacon 410A Four Channel Wall Mount Controller with Large Blue Strobe, without Battery Charging by RKI Instruments

The Beacon 410A is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitoring controller. It simultaneously displays the gas type, readings, and status for four channels of gas detection. It can monitor any combination of direct connect sensors (LEL, O2, CO2, and toxic gas sensors), as well as any 4-20mA transmitter.

Each channel has up to three fully configurable alarm points. A built-in silenceable audible alarm alerts you to alarm conditions. Each channel also has two dedicated fully configurable relays and there is a bank of common relays as well. The common relays can optionally be configured as additional relays allowing up to 3 alarm relays per channel. Each channel provides a 4-20mA output signal. A digital Modbus interface for remote logging of data via a Modbus network is standard. A Min-Max feature retains high & low peak readings for review at any time.

A fully configurable, high visibility strobe is available as an option. The unit can be powered from 115/220 VAC, or an external 24 VDC source. A trickle charging battery backup feature with battery assembly is also available as an option.

All features and functions of the Beacon 410A are controlled by easy to use menus on the OLED display. All features including form-C relay contacts of the Beacon 410A are built into the unit so you never need to purchase or maintain any "add-on" cards or components.

Features

  • Simultaneously control up to 4 gas monitoring channels
  • OLED display of all 4 channels
  • LEL / O2 / CO2 / toxic direct connect sensors
  • Accepts any 4-20 mA transmitter, 2 or 3 wire
  • Up to 3 programmable alarm levels per channel
  • Up to 3 configurable alarm relays per channel
  • 4-20 mA analog & Modbus digital output standard
  • 115 / 220 VAC or 24 VDC operation
  • Audible alarm with silence feature
  • RFI / EMI Resistant
  • Alarm reset switch
  • Built in trouble alarm with relay
  • Weather and corrosion resistant NEMA 4X enclosure

Industry Applications

  • Petrochemical plants
  • Refineries
  • Water & wastewater treatment plants
  • Pulp & paper mills
  • Gas, telephone, & electric utilities
  • Parking garages
  • Manufacturing facilities
  • Steel

*Please note we can only ship RKI products to customers within the United States

RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Large Blue Strobe and Battery Charging - 72-2104A-14B
View Product Details >

RKI Instruments Beacon 410A Four Channel Wall Mount Controller with Large Blue Strobe and Battery Charging - 72-2104A-14B




Item #72-2104A-14B
BrandRKI Instruments
Price: $3,613.05
Quantity:

72-2104A-14B Beacon 410A Four Channel Wall Mount Controller with Large Blue Strobe and Battery Charging by RKI Instruments

The Beacon 410A is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitoring controller. It simultaneously displays the gas type, readings, and status for four channels of gas detection. It can monitor any combination of direct connect sensors (LEL, O2, CO2, and toxic gas sensors), as well as any 4-20mA transmitter.

Each channel has up to three fully configurable alarm points. A built-in silenceable audible alarm alerts you to alarm conditions. Each channel also has two dedicated fully configurable relays and there is a bank of common relays as well. The common relays can optionally be configured as additional relays allowing up to 3 alarm relays per channel. Each channel provides a 4-20mA output signal. A digital Modbus interface for remote logging of data via a Modbus network is standard. A Min-Max feature retains high & low peak readings for review at any time.

A fully configurable, high visibility strobe is available as an option. The unit can be powered from 115/220 VAC, or an external 24 VDC source. A trickle charging battery backup feature with battery assembly is also available as an option.

All features and functions of the Beacon 410A are controlled by easy to use menus on the OLED display. All features including form-C relay contacts of the Beacon 410A are built into the unit so you never need to purchase or maintain any "add-on" cards or components.

Features

  • Simultaneously control up to 4 gas monitoring channels
  • OLED display of all 4 channels
  • LEL / O2 / CO2 / toxic direct connect sensors
  • Accepts any 4-20 mA transmitter, 2 or 3 wire
  • Up to 3 programmable alarm levels per channel
  • Up to 3 configurable alarm relays per channel
  • 4-20 mA analog & Modbus digital output standard
  • 115 / 220 VAC or 24 VDC operation
  • Audible alarm with silence feature
  • RFI / EMI Resistant
  • Alarm reset switch
  • Built in trouble alarm with relay
  • Weather and corrosion resistant NEMA 4X enclosure

Industry Applications

  • Petrochemical plants
  • Refineries
  • Water & wastewater treatment plants
  • Pulp & paper mills
  • Gas, telephone, & electric utilities
  • Parking garages
  • Manufacturing facilities
  • Steel

*Please note we can only ship RKI products to customers within the United States

RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Basic Unit, Horn/Strobe, 2 LEL/2 H2S Detectors without Cables (spec. on order), with AC Cord - 72-2104A-HLR-02
View Product Details >

RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Basic Unit, Horn/Strobe, 2 LEL/2 H2S Detectors without Cables (spec. on order), with AC Cord - 72-2104A-HLR-02




Item #72-2104A-HLR-02
BrandRKI Instruments
Price: $5,897.85
Quantity:

72-2104A-HLR-02 Beacon 410A Four Channel Wall Mount Controller, Basic Unit, Horn/Strobe, 2 LEL/2 H2S Detectors without Cables (spec. on order), with AC Cord by RKI Instruments

The Beacon 410A is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitoring controller. It simultaneously displays the gas type, readings, and status for four channels of gas detection. It can monitor any combination of direct connect sensors (LEL, O2, CO2, and toxic gas sensors), as well as any 4-20mA transmitter.

Each channel has up to three fully configurable alarm points. A built-in silenceable audible alarm alerts you to alarm conditions. Each channel also has two dedicated fully configurable relays and there is a bank of common relays as well. The common relays can optionally be configured as additional relays allowing up to 3 alarm relays per channel. Each channel provides a 4-20mA output signal. A digital Modbus interface for remote logging of data via a Modbus network is standard. A Min-Max feature retains high & low peak readings for review at any time.

A fully configurable, high visibility strobe is available as an option. The unit can be powered from 115/220 VAC, or an external 24 VDC source. A trickle charging battery backup feature with battery assembly is also available as an option.

All features and functions of the Beacon 410A are controlled by easy to use menus on the OLED display. All features including form-C relay contacts of the Beacon 410A are built into the unit so you never need to purchase or maintain any "add-on" cards or components.

Features

  • Simultaneously control up to 4 gas monitoring channels
  • OLED display of all 4 channels
  • LEL / O2 / CO2 / toxic direct connect sensors
  • Accepts any 4-20 mA transmitter, 2 or 3 wire
  • Up to 3 programmable alarm levels per channel
  • Up to 3 configurable alarm relays per channel
  • 4-20 mA analog & Modbus digital output standard
  • 115 / 220 VAC or 24 VDC operation
  • Audible alarm with silence feature
  • RFI / EMI Resistant
  • Alarm reset switch
  • Built in trouble alarm with relay
  • Weather and corrosion resistant NEMA 4X enclosure

Industry Applications

  • Petrochemical plants
  • Refineries
  • Water & wastewater treatment plants
  • Pulp & paper mills
  • Gas, telephone, & electric utilities
  • Parking garages
  • Manufacturing facilities
  • Steel

*Please note we can only ship RKI products to customers within the United States

RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Basic Unit, Horn/Strobe on top, 2 LEL/2 H2S det without Cables (spec. on order), with AC Cord - 72-2104A-HLR-03
View Product Details >

RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Basic Unit, Horn/Strobe on top, 2 LEL/2 H2S det without Cables (spec. on order), with AC Cord - 72-2104A-HLR-03




Item #72-2104A-HLR-03
BrandRKI Instruments
Price: $5,897.85
Quantity:

72-2104A-HLR-03 Beacon 410A Four Channel Wall Mount Controller, Basic Unit, Horn/Strobe on top, 2 LEL/2 H2S det without Cables (spec. on order), with AC Cord by RKI Instruments

The Beacon 410A is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitoring controller. It simultaneously displays the gas type, readings, and status for four channels of gas detection. It can monitor any combination of direct connect sensors (LEL, O2, CO2, and toxic gas sensors), as well as any 4-20mA transmitter.

Each channel has up to three fully configurable alarm points. A built-in silenceable audible alarm alerts you to alarm conditions. Each channel also has two dedicated fully configurable relays and there is a bank of common relays as well. The common relays can optionally be configured as additional relays allowing up to 3 alarm relays per channel. Each channel provides a 4-20mA output signal. A digital Modbus interface for remote logging of data via a Modbus network is standard. A Min-Max feature retains high & low peak readings for review at any time.

A fully configurable, high visibility strobe is available as an option. The unit can be powered from 115/220 VAC, or an external 24 VDC source. A trickle charging battery backup feature with battery assembly is also available as an option.

All features and functions of the Beacon 410A are controlled by easy to use menus on the OLED display. All features including form-C relay contacts of the Beacon 410A are built into the unit so you never need to purchase or maintain any "add-on" cards or components.

Features

  • Simultaneously control up to 4 gas monitoring channels
  • OLED display of all 4 channels
  • LEL / O2 / CO2 / toxic direct connect sensors
  • Accepts any 4-20 mA transmitter, 2 or 3 wire
  • Up to 3 programmable alarm levels per channel
  • Up to 3 configurable alarm relays per channel
  • 4-20 mA analog & Modbus digital output standard
  • 115 / 220 VAC or 24 VDC operation
  • Audible alarm with silence feature
  • RFI / EMI Resistant
  • Alarm reset switch
  • Built in trouble alarm with relay
  • Weather and corrosion resistant NEMA 4X enclosure

Industry Applications

  • Petrochemical plants
  • Refineries
  • Water & wastewater treatment plants
  • Pulp & paper mills
  • Gas, telephone, & electric utilities
  • Parking garages
  • Manufacturing facilities
  • Steel

*Please note we can only ship RKI products to customers within the United States

RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Basic Unit with 12 VDC Operation & Horn/Strobe, 4 H2S Sensors on 150 ft Cables - 72-2104A-HR-03
View Product Details >

RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Basic Unit with 12 VDC Operation & Horn/Strobe, 4 H2S Sensors on 150 ft Cables - 72-2104A-HR-03




Item #72-2104A-HR-03
BrandRKI Instruments
Price: $7,029.75
Quantity:

72-2104A-HR-03 Beacon 410A Four Channel Wall Mount Controller, Basic Unit with 12 VDC Operation & Horn/Strobe, 4 H2S Sensors on 150 ft Cables by RKI Instruments

The Beacon 410A is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitoring controller. It simultaneously displays the gas type, readings, and status for four channels of gas detection. It can monitor any combination of direct connect sensors (LEL, O2, CO2, and toxic gas sensors), as well as any 4-20mA transmitter.

Each channel has up to three fully configurable alarm points. A built-in silenceable audible alarm alerts you to alarm conditions. Each channel also has two dedicated fully configurable relays and there is a bank of common relays as well. The common relays can optionally be configured as additional relays allowing up to 3 alarm relays per channel. Each channel provides a 4-20mA output signal. A digital Modbus interface for remote logging of data via a Modbus network is standard. A Min-Max feature retains high & low peak readings for review at any time.

A fully configurable, high visibility strobe is available as an option. The unit can be powered from 115/220 VAC, or an external 24 VDC source. A trickle charging battery backup feature with battery assembly is also available as an option.

All features and functions of the Beacon 410A are controlled by easy to use menus on the OLED display. All features including form-C relay contacts of the Beacon 410A are built into the unit so you never need to purchase or maintain any "add-on" cards or components.

Features

  • Simultaneously control up to 4 gas monitoring channels
  • OLED display of all 4 channels
  • LEL / O2 / CO2 / toxic direct connect sensors
  • Accepts any 4-20 mA transmitter, 2 or 3 wire
  • Up to 3 programmable alarm levels per channel
  • Up to 3 configurable alarm relays per channel
  • 4-20 mA analog & Modbus digital output standard
  • 115 / 220 VAC or 24 VDC operation
  • Audible alarm with silence feature
  • RFI / EMI Resistant
  • Alarm reset switch
  • Built in trouble alarm with relay
  • Weather and corrosion resistant NEMA 4X enclosure

Industry Applications

  • Petrochemical plants
  • Refineries
  • Water & wastewater treatment plants
  • Pulp & paper mills
  • Gas, telephone, & electric utilities
  • Parking garages
  • Manufacturing facilities
  • Steel

*Please note we can only ship RKI products to customers within the United States

RKI Instruments Beacon 410A Four Channel Wall Mount Controller, with Battery Charging, Amber (alm1) & Red (alm2) Federal Streamline LP3 Strobes - 72-2104A-08-01
View Product Details >

RKI Instruments Beacon 410A Four Channel Wall Mount Controller, with Battery Charging, Amber (alm1) & Red (alm2) Federal Streamline LP3 Strobes - 72-2104A-08-01




Item #72-2104A-08-01
BrandRKI Instruments
Price: $3,911.25
Quantity:

72-2104A-08-01 Beacon 410A Four Channel Wall Mount Controller, with Battery Charging, Amber (alm1) & Red (alm2) Federal Streamline LP3 Strobes by RKI Instruments

The Beacon 410A is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitoring controller. It simultaneously displays the gas type, readings, and status for four channels of gas detection. It can monitor any combination of direct connect sensors (LEL, O2, CO2, and toxic gas sensors), as well as any 4-20mA transmitter.

Each channel has up to three fully configurable alarm points. A built-in silenceable audible alarm alerts you to alarm conditions. Each channel also has two dedicated fully configurable relays and there is a bank of common relays as well. The common relays can optionally be configured as additional relays allowing up to 3 alarm relays per channel. Each channel provides a 4-20mA output signal. A digital Modbus interface for remote logging of data via a Modbus network is standard. A Min-Max feature retains high & low peak readings for review at any time.

A fully configurable, high visibility strobe is available as an option. The unit can be powered from 115/220 VAC, or an external 24 VDC source. A trickle charging battery backup feature with battery assembly is also available as an option.

All features and functions of the Beacon 410A are controlled by easy to use menus on the OLED display. All features including form-C relay contacts of the Beacon 410A are built into the unit so you never need to purchase or maintain any "add-on" cards or components.

Features

  • Simultaneously control up to 4 gas monitoring channels
  • OLED display of all 4 channels
  • LEL / O2 / CO2 / toxic direct connect sensors
  • Accepts any 4-20 mA transmitter, 2 or 3 wire
  • Up to 3 programmable alarm levels per channel
  • Up to 3 configurable alarm relays per channel
  • 4-20 mA analog & Modbus digital output standard
  • 115 / 220 VAC or 24 VDC operation
  • Audible alarm with silence feature
  • RFI / EMI Resistant
  • Alarm reset switch
  • Built in trouble alarm with relay
  • Weather and corrosion resistant NEMA 4X enclosure

Industry Applications

  • Petrochemical plants
  • Refineries
  • Water & wastewater treatment plants
  • Pulp & paper mills
  • Gas, telephone, & electric utilities
  • Parking garages
  • Manufacturing facilities
  • Steel

*Please note we can only ship RKI products to customers within the United States

RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Standard Basic Unit for 12 VDC Operation - 72-2104A-12
View Product Details >

RKI Instruments Beacon 410A Four Channel Wall Mount Controller, Standard Basic Unit for 12 VDC Operation - 72-2104A-12




Item #72-2104A-12
BrandRKI Instruments
Price: $3,007.20
Quantity:

72-2104A-12 410A Four Channel Wall Mount Controller, Standard Basic Unit for 12 VDC Operation by RKI Instruments

The Beacon 410A is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitoring controller. It simultaneously displays the gas type, readings, and status for four channels of gas detection. It can monitor any combination of direct connect sensors (LEL, O2, CO2, and toxic gas sensors), as well as any 4-20mA transmitter.

Each channel has up to three fully configurable alarm points. A built-in silenceable audible alarm alerts you to alarm conditions. Each channel also has two dedicated fully configurable relays and there is a bank of common relays as well. The common relays can optionally be configured as additional relays allowing up to 3 alarm relays per channel. Each channel provides a 4-20mA output signal. A digital Modbus interface for remote logging of data via a Modbus network is standard. A Min-Max feature retains high & low peak readings for review at any time.

A fully configurable, high visibility strobe is available as an option. The unit can be powered from 115/220 VAC, or an external 24 VDC source. A trickle charging battery backup feature with battery assembly is also available as an option.

All features and functions of the Beacon 410A are controlled by easy to use menus on the OLED display. All features including form-C relay contacts of the Beacon 410A are built into the unit so you never need to purchase or maintain any "add-on" cards or components.

Features

  • Simultaneously control up to 4 gas monitoring channels
  • OLED display of all 4 channels
  • LEL / O2 / CO2 / toxic direct connect sensors
  • Accepts any 4-20 mA transmitter, 2 or 3 wire
  • Up to 3 programmable alarm levels per channel
  • Up to 3 configurable alarm relays per channel
  • 4-20 mA analog & Modbus digital output standard
  • 115 / 220 VAC or 24 VDC operation
  • Audible alarm with silence feature
  • RFI / EMI Resistant
  • Alarm reset switch
  • Built in trouble alarm with relay
  • Weather and corrosion resistant NEMA 4X enclosure

Industry Applications

  • Petrochemical plants
  • Refineries
  • Water & wastewater treatment plants
  • Pulp & paper mills
  • Gas, telephone, & electric utilities
  • Parking garages
  • Manufacturing facilities
  • Steel

*Please note we can only ship RKI products to customers within the United States

Results: 1-14 of 14
Items per page:
Sort by:
JJS Technical Services
JJS Technical Services 1900 East Golf Rd., Suite 950 Schaumburg, IL 60173

1-866-4 JJSTECH (1-866-455-7832) sales@jjstech.com

Company
Orders
More
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
Ask an Expert

1-866-4 JJSTECH(1-866-455-7832)

Email Us
  • HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  • Authorize.Net Merchant - Click to Verify

Copyright ©2000-2023. JJS Technical Services. Logos and Trademarks are the property of their respective owners. All Rights Reserved.