Inspector Accessories

Inspector Wipe Test Plate without Rails by SE International

The stainless steel WipeTest Plate slides easily onto the Inspector positioning the depression and wipe directly in front of the GM tube window at a fixed distance of 1 centimeter. The WipeTest plate is removable for general surveying. (patent #5,936,246) Many of the customers using The Inspector Wipe Test Plate also use it as a Beta Shield for the 2-inch GM detector. (patent# 5,936,246)

Inspectors with a SN# of 30328 or higher are compatible with The Wipe Test Plate w/o Rails. (SEI Part# WTPIN)

Utility Menu

• 3 second (fast response)
• Switches from mR/hr and CPM to µSv/hr and CPS
• Reset the cal factor to 100.
• Adjust the CAL factor.
• Reset all setting to default factory setting.

Note: Be sure to check the Serial Number of your unit prior to ordering!!

Inspector Wipe Test Plate with Metal Rails by SE International

The stainless steel WipeTest Plate slides easily onto the Inspector positioning the depression and wipe directly in front of the GM tube window at a fixed distance of 1 centimeter. The WipeTest plate is removable for general surveying. (patent #5,936,246) Many of the customers using The Inspector Wipe Test Plate also use it as a Beta Shield for the 2-inch GM detector. (patent# 5,936,246)

Inspectors with a SN# of 30327 or lower are compatible with The Wipe Test Plate w/ Metal Rails. (SEI Part# WTPA)

Utility Menu

• 3 second (fast response)
• Switches from mR/hr and CPM to µSv/hr and CPS
• Reset the cal factor to 100.
• Adjust the CAL factor.
• Reset all setting to default factory setting.

Note: Be sure to check the Serial Number of your unit prior to ordering!!

Stand for SN# 30327 & below by SE International

• For use with the Inspector, Digilert, and Geiger Models.
• Whether you need to perform area monitoring or scan your hands and items for contamination, the STAND offers a convenient way for the instrument to STAND vertically while leaving your hands free for other tasks.
• The STAND is made from electro-polished stainless steel.
• Double stick adhesive strips are included to mount the STAND in a permanent location.
• The STAND fits in the carrying case with the instrument.

Stand for for SN# 30328 & above by SE International

• For use with the Inspector, Digilert, and Geiger Models.
• Whether you need to perform area monitoring or scan your hands and items for contamination, the STAND offers a convenient way for the instrument to STAND vertically while leaving your hands free for other tasks.
• The STAND is made from electro-polished stainless steel.
• Double stick adhesive strips are included to mount the STAND in a permanent location.
• The STAND fits in the carrying case with the instrument.

Xtreme Protective Boot by SE International

The Xtreme boot offers maximum performance in a lightweight rugged solution for using Radiation Alert® products in the field. The Xtreme boot is designed specifically for individuals operating in tough environments, such as 1st Responders, Mining and HAZMAT crews. Made of a RoHS compliant TPE rubber, the case also offers superior grip and drop protection. When using the pancake detector, a protective door opens on the back of the case exposing the end window of the GM for alpha detection. The Xtreme boot is designed for use with the Inspector, and Digilert handheld radiation detectors.

Carrying Case

Xtreme Boot Yellow Nylon Carrying Case by SE International

Carrying Case for Inspector Xtreme, Digilert 100 Xtreme, and URSA-II Models provides ease of mobility and splash protection.

Observer Software by SE International

The New Observer USB is a free version of the Observer software that runs on Windows®. It can be used with The Ranger, The Ranger EXP, & The Monitor 200 Radiation Detectors. The Observer USB reads in Counts, CPM, and CPS, as well as μR/hr, mR/hr, and μSv/hr and has the ability to collect, log, and perform statistical analysis on the data received. No Mac or WinRT versions available. However, for info about running windows on an Apple computer, please click here.

Free Download of the Observer USB Software:

Observer USB Software 1.3.0.8

Downloaded Data Sample

Previous Revision:
Observer USB 1.1.1.0