1-866-4 JJSTECH(1-866-455-7832)

Sensorex DO Sensor, HDPE, 10K across anode - DO6400/H

Item #:
SEN-DO6400-H
Brand:
Sensorex
Sensorex DO Sensor, HDPE, 10K across anode - DO6400/H
$605.25
Qty
Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
Sensorex DO Sensor, HDPE, 10K across anode - DO6400/H

Sensorex DO Sensor, HDPE, 10K across anode - DO6400/H

$605.25

DO6400/H DO Sensor, HDPE, 10K across anode by Sensorex

The DO6400 & 7400 series dissolved oxygen sensors feature a large capacity electrolyte holder, positive fit, easy to replace membrane and dependable galvanic cell technology for long term deployment. The body design ensures a good grip when wet. Ideal for Aquaculture and wastewater monitoring applications, these sensors require minimal maintenance. PTFE or High-Density Polyethylene (HDPE) membranes are available. 2 Replacement membranes, installation tool and electrolyte are included. Additional maintenance parts are in convenient kits (see ordering information). Sensors with mV output as well as built-in 4-20mA output in 0-100% and 0-200% saturation range are available. In addition, Modbus-485 output versions with 0-100% or 0-300% range are available.

Digital Communication for More Process Visibility:

  • Modbus and 4-20 mA output options now available
  • Con guration and calibration can be done using web based software

Easy to Install and Maintain

  • Membranes can be replaced quickly
  • Designed to have good grip even when sensor is wet

Long Lasting Life

  • Proven and dependable galvanic cell technology with large solution capacity
  • Replacement membranes, electrolyte, and installation tool are included
O2 Measuring Range DO6400, DO6400TC (0.5-20ppm), DO6441 (0-100%), DO6442 (0-200%), DO7400, DO7400TC (0.03-20ppm), DO7441 (0-100%), DO7442 (0-200%), DO6441-MB2 (0-150%), DO6442MB2-300 (0-300%)
Body Material Noryl
Cathode Silver
Anode Zinc (DO6400 Series), Lead (DO7400 Series)
Maximum Temperature 50° C
Power Requirement 12-36V DC (for Models DO6441, DO6442, DO7441 and DO7442 only), 24V DC for Modbus
Temperature Sensor (User specified temperature elements) Connect to your controller or PLC for temperature output
Cable Length 10 feet, tinned leads
Minimum Flow Rate 2 inches per second
Output @ Air Saturation HDPE DO6400 & DO7400 (45mV +/- 9mV), PTFE DO6400 & DO7400 (33mV +/- 9mV), HDPE & PTFE DO6441, DO7441 (0-100%) - FIXED 4-4.5MA = <1 PPM DO, 18-22 MA = SATURATED AIR, HDPE & PTFE DO6442 - fixed 4 -4.5mA = <1 ppm DO, 11-13mA = saturated air, PTFE DO6441-MB2 = 0-???% modbus 485, PTFE DO6442-MB2-300 = 0-???% MODBUS 485

Questions & Answers