1-866-4 JJSTECH(1-866-455-7832)

  1. Home
  2. Sensorex
  3. Miscellaneous

Miscellaneous

Results: 1-24 of 416
Filter by Category
Items per page:
Sort by:
  1. Sensorex Cable, Quick Disconnect, SN6 to BNC, 1 M - DINEL-BNCQUICK VIEW

    Sensorex Cable, Quick Disconnect, SN6 to BNC, 1 M - DINEL-BNC

    Brand: Sensorex | Item #: SEN-DINEL-BNC

    $50.31
  2. Sensorex Cable, Quick Disconnect, SN6 to DIN-M, 1M - DINEL-DINMQUICK VIEW

    Sensorex Cable, Quick Disconnect, SN6 to DIN-M, 1M - DINEL-DINM

    Brand: Sensorex | Item #: SEN-DINEL-DINM

    $54.63
  3. Sensorex Cable, SN6 to Tinned Leads, 1M - DINEL-TLQUICK VIEW

    Sensorex Cable, SN6 to Tinned Leads, 1M - DINEL-TL

    Brand: Sensorex | Item #: SEN-DINEL-TL

    $61.53
  4. Sensorex DO1200 Replacement Membrane Cap, with Preinstalled HDPE Membrane - DO1200-CAP/HQUICK VIEW

    Sensorex DO1200 Replacement Membrane Cap, with Preinstalled HDPE Membrane - DO1200-CAP/H

    Brand: Sensorex | Item #: SEN-DO1200-CAP-H

    $70.15
  5. Sensorex DO1200 Replacement Membrane Cap, with Preinstalled PTFE Membrane - DO1200-CAP/TQUICK VIEW

    Sensorex DO1200 Replacement Membrane Cap, with Preinstalled PTFE Membrane - DO1200-CAP/T

    Brand: Sensorex | Item #: SEN-DO1200-CAP-T

    $70.15
  6. Sensorex 12mm Sensor, 1/2 in. NPT Install Kit with Tee - FC50PQUICK VIEW

    Sensorex 12mm Sensor, 1/2 in. NPT Install Kit with Tee - FC50P

    Brand: Sensorex | Item #: SEN-FC50P

    $18.98
  7. Sensorex 12mm Sensor 3/4 in. NPT Install Fitting - FC75PQUICK VIEW

    Sensorex 12mm Sensor 3/4 in. NPT Install Fitting - FC75P

    Brand: Sensorex | Item #: SEN-FC75P

    $19.55
  8. Sensorex 1/2 Gland for 3/8 dia Elect. - FC38PQUICK VIEW

    Sensorex 1/2 Gland for 3/8 dia Elect. - FC38P

    Brand: Sensorex | Item #: SEN-FC38P

    $15.81
  9. Sensorex 200uL Low Volume Acrylic Flow Cell includes 2 each 1/16" Tube Fittings - FC45CQUICK VIEW

    Sensorex 200uL Low Volume Acrylic Flow Cell includes 2 each 1/16" Tube Fittings - FC45C

    Brand: Sensorex | Item #: SEN-FC45C

    $316.25
  10. Sensorex 50uL Low Volume Acrylic Flow Cell includes 2 each 1/16" Tube Fittings - FC47CQUICK VIEW

    Sensorex 50uL Low Volume Acrylic Flow Cell includes 2 each 1/16" Tube Fittings - FC47C

    Brand: Sensorex | Item #: SEN-FC47C

    $342.41
  11. Sensorex 50uL Low Volume PVDF Flow Cell includes 2 each 1/16" Tube Fittings - FC49KQUICK VIEW

    Sensorex 50uL Low Volume PVDF Flow Cell includes 2 each 1/16" Tube Fittings - FC49K

    Brand: Sensorex | Item #: SEN-FC49K

    $572.13
  12. Sensorex 200uL Low Volume PVDF Flow Cell includes 2 each 1/16" Tube Fittings - FC51KQUICK VIEW

    Sensorex 200uL Low Volume PVDF Flow Cell includes 2 each 1/16" Tube Fittings - FC51K

    Brand: Sensorex | Item #: SEN-FC51K

    $532.16
  13. Sensorex S450 1/2" NPT Install Fitting - FC51PQUICK VIEW

    Sensorex S450 1/2" NPT Install Fitting - FC51P

    Brand: Sensorex | Item #: SEN-FC51P

    $30.76
  14. Sensorex S450 3/4" NPT Install Fitting - FC71PQUICK VIEW

    Sensorex S450 3/4" NPT Install Fitting - FC71P

    Brand: Sensorex | Item #: SEN-FC71P

    $31.91
  15. Sensorex Ball Valve, 1" Full Port, S675, S676, S677 - BV1QUICK VIEW

    Sensorex Ball Valve, 1" Full Port, S675, S676, S677 - BV1

    Brand: Sensorex | Item #: SEN-BV1

    $174.17
  16. Sensorex S8000, TNC to BNR Connector Adapter - EA890QUICK VIEW

    Sensorex S8000, TNC to BNR Connector Adapter - EA890

    Brand: Sensorex | Item #: SEN-EA890

    $69.58
  17. Sensorex S8000, TNC to 8 Pin Din Adapter - EA891QUICK VIEW

    Sensorex S8000, TNC to 8 Pin Din Adapter - EA891

    Brand: Sensorex | Item #: SEN-EA891

    $90.56
  18. Sensorex S8000, Sensor Holder, Non-ATC, Ground Pin - EA899QUICK VIEW

    Sensorex S8000, Sensor Holder, Non-ATC, Ground Pin - EA899

    Brand: Sensorex | Item #: SEN-EA899

    $177.39
  19. Sensorex S8000, ATC Sensor Holder, TC= - EA899TCQUICK VIEW

    Sensorex S8000, ATC Sensor Holder, TC= - EA899TC

    Brand: Sensorex | Item #: SEN-EA899TC

    $230.86
  20. Sensorex S8000, ATC Sensor Holder, TC=P1K - EA899TC/P1KQUICK VIEW

    Sensorex S8000, ATC Sensor Holder, TC=P1K - EA899TC/P1K

    Brand: Sensorex | Item #: SEN-EA899TC-P1K

    $230.86
  21. Sensorex S8000, ATC Sensor Holder, TC=PT1 - EA899TC/PT1QUICK VIEW

    Sensorex S8000, ATC Sensor Holder, TC=PT1 - EA899TC/PT1

    Brand: Sensorex | Item #: SEN-EA899TC-PT1

    $230.86
  22. Sensorex S8000, Unity Gain Amplifier (pH Amp) - EM800QUICK VIEW

    Sensorex S8000, Unity Gain Amplifier (pH Amp) - EM800

    Brand: Sensorex | Item #: SEN-EM800

    $196.94
  23. Sensorex S8000, Module, Diff Amplifier - EM801QUICK VIEW

    Sensorex S8000, Module, Diff Amplifier - EM801

    Brand: Sensorex | Item #: SEN-EM801

    $268.24
  24. Sensorex Extension Cable, (1 meter) - EXT CABLEQUICK VIEW

    Sensorex Extension Cable, (1 meter) - EXT CABLE

    Brand: Sensorex | Item #: SEN-EXT-CABLE

    $49.74
Sensorex Cable, Quick Disconnect, SN6 to BNC, 1 M - DINEL-BNC
View Product Details >

Sensorex Cable, Quick Disconnect, SN6 to BNC, 1 M - DINEL-BNC




Item #SEN-DINEL-BNC
BrandSensorex
Price: $50.31
Quantity:

Cable, Quick Disconnect, SN6 to BNC, 1 M


Sensorex Cable, Quick Disconnect, SN6 to DIN-M, 1M - DINEL-DINM
View Product Details >

Sensorex Cable, Quick Disconnect, SN6 to DIN-M, 1M - DINEL-DINM




Item #SEN-DINEL-DINM
BrandSensorex
Price: $54.63
Quantity:

Cable, Quick Disconnect, SN6 to DIN-M, 1M


Sensorex Cable, SN6 to Tinned Leads, 1M - DINEL-TL
View Product Details >

Sensorex Cable, SN6 to Tinned Leads, 1M - DINEL-TL




Item #SEN-DINEL-TL
BrandSensorex
Price: $61.53
Quantity:

Cable, SN6 to Tinned Leads, 1M


Sensorex DO1200 Replacement Membrane Cap, with Preinstalled HDPE Membrane - DO1200-CAP/H
View Product Details >

Sensorex DO1200 Replacement Membrane Cap, with Preinstalled HDPE Membrane - DO1200-CAP/H




Item #SEN-DO1200-CAP-H
BrandSensorex
Price: $70.15
Quantity:

DO1200 Replacement Membrane Cap, with Preinstalled HDPE Membrane


Sensorex DO1200 Replacement Membrane Cap, with Preinstalled PTFE Membrane - DO1200-CAP/T
View Product Details >

Sensorex DO1200 Replacement Membrane Cap, with Preinstalled PTFE Membrane - DO1200-CAP/T




Item #SEN-DO1200-CAP-T
BrandSensorex
Price: $70.15
Quantity:

DO1200 Replacement Membrane Cap, with Preinstalled PTFE Membrane


Sensorex 12mm Sensor, 1/2 in. NPT Install Kit with Tee - FC50P
View Product Details >

Sensorex 12mm Sensor, 1/2 in. NPT Install Kit with Tee - FC50P




Item #SEN-FC50P
BrandSensorex
Price: $18.98
Quantity:

12mm Sensor, 1/2 in. NPT Install Kit with Tee


Sensorex 12mm Sensor 3/4 in. NPT Install Fitting - FC75P
View Product Details >

Sensorex 12mm Sensor 3/4 in. NPT Install Fitting - FC75P




Item #SEN-FC75P
BrandSensorex
Price: $19.55
Quantity:

12mm Sensor 3/4 in. NPT Install Fitting


Sensorex 1/2 Gland for 3/8 dia Elect. - FC38P
View Product Details >

Sensorex 1/2 Gland for 3/8 dia Elect. - FC38P




Item #SEN-FC38P
BrandSensorex
Price: $15.81
Quantity:

1/2 Gland for 3/8 dia Elect.


Sensorex 200uL Low Volume Acrylic Flow Cell includes 2 each 1/16" Tube Fittings - FC45C
View Product Details >

Sensorex 200uL Low Volume Acrylic Flow Cell includes 2 each 1/16" Tube Fittings - FC45C




Item #SEN-FC45C
BrandSensorex
Price: $316.25
Quantity:

FC45C 200uL Low Volume Acrylic Flow Cell includes 2 each 1/16" Tube Fittings by Sensorex

Sensorex manufactures fast response 50 and 200 microliter internal volume flow cells for pH measurement. All cells are made of clear Acrylic or Kynar (PVDF). Designs include 1/16" inlet and outlet fittings. All cells use the standard, economical Sensorex 450CD Flat Surface Combination pH/Reference Electrode or a special version of 450CD with 100psig pressure tolerance (model 970277).

The pH Detectors are designed for use with a variety of instrumental techniques such as FIA, HPLC and IEF and are also used to continuously monitor the pH of low volume flows in bench scale chemical systems.

Both the 50 and 200 microliter internal volume flow cells areavailable in acrylic or PVDF and are supplied with inlet and outlet fittings sized for standard 1/16" OD tubing. The cells' ports have 1/4-28 threads which accept a variety of other tube fittings.

Very low internal volumes are achieved by using a flat surface pH electrode located at the top of the flow cavity. The resulting rectangular cross-section flow path has no protruding parts which could interfere with a clean sweeping flow. The result of this design is the fast system response shown on the performance curves on page 2.

The Flat Surface Electrode, Sensorex Model 450CD, is a combination pH/Reference electrode with double reference junction design. It includes both a pH and reference half cell. The reference electrode is a sealed, gel-filled design and includes a peripheral, semi-porous polyethylene junction.

  • Fast response!
  • Choice of 200uL or ultra-low volume 50uL flow cells
  • Acrylic or PVDF (biocompatible) materials of construction
  • Supplied with flangeless 1/4-28 fittings for 1/16" OD for tubing
  • Use with Flat-Surface Easy-To-Clean Electrode
  • Model available for 100psi use
Sensorex 50uL Low Volume Acrylic Flow Cell includes 2 each 1/16" Tube Fittings - FC47C
View Product Details >

Sensorex 50uL Low Volume Acrylic Flow Cell includes 2 each 1/16" Tube Fittings - FC47C




Item #SEN-FC47C
BrandSensorex
Price: $342.41
Quantity:

FC47C 50uL Low Volume Acrylic Flow Cell includes 2 each 1/16" Tube Fittings by Sensorex

Sensorex manufactures fast response 50 and 200 microliter internal volume flow cells for pH measurement. All cells are made of clear Acrylic or Kynar (PVDF). Designs include 1/16" inlet and outlet fittings. All cells use the standard, economical Sensorex 450CD Flat Surface Combination pH/Reference Electrode or a special version of 450CD with 100psig pressure tolerance (model 970277).

The pH Detectors are designed for use with a variety of instrumental techniques such as FIA, HPLC and IEF and are also used to continuously monitor the pH of low volume flows in bench scale chemical systems.

Both the 50 and 200 microliter internal volume flow cells areavailable in acrylic or PVDF and are supplied with inlet and outlet fittings sized for standard 1/16" OD tubing. The cells' ports have 1/4-28 threads which accept a variety of other tube fittings.

Very low internal volumes are achieved by using a flat surface pH electrode located at the top of the flow cavity. The resulting rectangular cross-section flow path has no protruding parts which could interfere with a clean sweeping flow. The result of this design is the fast system response shown on the performance curves on page 2.

The Flat Surface Electrode, Sensorex Model 450CD, is a combination pH/Reference electrode with double reference junction design. It includes both a pH and reference half cell. The reference electrode is a sealed, gel-filled design and includes a peripheral, semi-porous polyethylene junction.

  • Fast response!
  • Choice of 200uL or ultra-low volume 50uL flow cells
  • Acrylic or PVDF (biocompatible) materials of construction
  • Supplied with flangeless 1/4-28 fittings for 1/16" OD for tubing
  • Use with Flat-Surface Easy-To-Clean Electrode
  • Model available for 100psi use
Sensorex 50uL Low Volume PVDF Flow Cell includes 2 each 1/16" Tube Fittings - FC49K
View Product Details >

Sensorex 50uL Low Volume PVDF Flow Cell includes 2 each 1/16" Tube Fittings - FC49K




Item #SEN-FC49K
BrandSensorex
Price: $572.13
Quantity:

FC49K 50uL Low Volume PVDF Flow Cell includes 2 each 1/16" Tube Fittings by Sensorex

Sensorex manufactures fast response 50 and 200 microliter internal volume flow cells for pH measurement. All cells are made of clear Acrylic or Kynar (PVDF). Designs include 1/16" inlet and outlet fittings. All cells use the standard, economical Sensorex 450CD Flat Surface Combination pH/Reference Electrode or a special version of 450CD with 100psig pressure tolerance (model 970277).

The pH Detectors are designed for use with a variety of instrumental techniques such as FIA, HPLC and IEF and are also used to continuously monitor the pH of low volume flows in bench scale chemical systems.

Both the 50 and 200 microliter internal volume flow cells areavailable in acrylic or PVDF and are supplied with inlet and outlet fittings sized for standard 1/16" OD tubing. The cells' ports have 1/4-28 threads which accept a variety of other tube fittings.

Very low internal volumes are achieved by using a flat surface pH electrode located at the top of the flow cavity. The resulting rectangular cross-section flow path has no protruding parts which could interfere with a clean sweeping flow. The result of this design is the fast system response shown on the performance curves on page 2.

The Flat Surface Electrode, Sensorex Model 450CD, is a combination pH/Reference electrode with double reference junction design. It includes both a pH and reference half cell. The reference electrode is a sealed, gel-filled design and includes a peripheral, semi-porous polyethylene junction.

  • Fast response!
  • Choice of 200uL or ultra-low volume 50uL flow cells
  • Acrylic or PVDF (biocompatible) materials of construction
  • Supplied with flangeless 1/4-28 fittings for 1/16" OD for tubing
  • Use with Flat-Surface Easy-To-Clean Electrode
  • Model available for 100psi use
Sensorex 200uL Low Volume PVDF Flow Cell includes 2 each 1/16" Tube Fittings - FC51K
View Product Details >

Sensorex 200uL Low Volume PVDF Flow Cell includes 2 each 1/16" Tube Fittings - FC51K




Item #SEN-FC51K
BrandSensorex
Price: $532.16
Quantity:

FC51K 200uL Low Volume PVDF Flow Cell includes 2 each 1/16" Tube Fittings by Sensorex

Sensorex manufactures fast response 50 and 200 microliter internal volume flow cells for pH measurement. All cells are made of clear Acrylic or Kynar (PVDF). Designs include 1/16" inlet and outlet fittings. All cells use the standard, economical Sensorex 450CD Flat Surface Combination pH/Reference Electrode or a special version of 450CD with 100psig pressure tolerance (model 970277).

The pH Detectors are designed for use with a variety of instrumental techniques such as FIA, HPLC and IEF and are also used to continuously monitor the pH of low volume flows in bench scale chemical systems.

Both the 50 and 200 microliter internal volume flow cells areavailable in acrylic or PVDF and are supplied with inlet and outlet fittings sized for standard 1/16" OD tubing. The cells' ports have 1/4-28 threads which accept a variety of other tube fittings.

Very low internal volumes are achieved by using a flat surface pH electrode located at the top of the flow cavity. The resulting rectangular cross-section flow path has no protruding parts which could interfere with a clean sweeping flow. The result of this design is the fast system response shown on the performance curves on page 2.

The Flat Surface Electrode, Sensorex Model 450CD, is a combination pH/Reference electrode with double reference junction design. It includes both a pH and reference half cell. The reference electrode is a sealed, gel-filled design and includes a peripheral, semi-porous polyethylene junction.

  • Fast response!
  • Choice of 200uL or ultra-low volume 50uL flow cells
  • Acrylic or PVDF (biocompatible) materials of construction
  • Supplied with flangeless 1/4-28 fittings for 1/16" OD for tubing
  • Use with Flat-Surface Easy-To-Clean Electrode
  • Model available for 100psi use
Sensorex S450 1/2" NPT Install Fitting - FC51P
View Product Details >

Sensorex S450 1/2" NPT Install Fitting - FC51P




Item #SEN-FC51P
BrandSensorex
Price: $30.76
Quantity:

S450 1/2" NPT Install Fitting


Sensorex S450 3/4" NPT Install Fitting - FC71P
View Product Details >

Sensorex S450 3/4" NPT Install Fitting - FC71P




Item #SEN-FC71P
BrandSensorex
Price: $31.91
Quantity:

S450 3/4" NPT Install Fitting


Sensorex Ball Valve, 1" Full Port, S675, S676, S677 - BV1
View Product Details >

Sensorex Ball Valve, 1" Full Port, S675, S676, S677 - BV1




Item #SEN-BV1
BrandSensorex
Price: $174.17
Quantity:

BV1 Ball Valve, 1" Full Port, S675, S676, S677 by Sensorex

Sensorex BV-1 full port 1" CPVC ball valve is designed for use with our S675 Series Wet Tap Insertion Assemblies and S656CD pH Sensors. The BV1 mounts a pH sensor in pressurized lines or the sidewall of tanks. Sensors can be retracted for service without shutting down lines or the need to empty tanks. Constructed of durable CPVC.

  • Proven design: Remove sensors for cleaning and maintenance without system shutdown
  • Full port 1" design: Compatible with Sensorex insertion assemblies & sensors
  • One year limited warranty: We stand behind all our products with the Sensorex Guarantee
  • Designed for use with our S675 Series Wet Tap Insertion Assemblies and S656CD pH Sensors
Sensorex S8000, TNC to BNR Connector Adapter - EA890
View Product Details >

Sensorex S8000, TNC to BNR Connector Adapter - EA890




Item #SEN-EA890
BrandSensorex
Price: $69.58
Quantity:

S8000, TNC to BNR Connector Adapter


Sensorex S8000, TNC to 8 Pin Din Adapter - EA891
View Product Details >

Sensorex S8000, TNC to 8 Pin Din Adapter - EA891




Item #SEN-EA891
BrandSensorex
Price: $90.56
Quantity:

S8000, TNC to 8 Pin Din Adapter


Sensorex S8000, Sensor Holder, Non-ATC, Ground Pin - EA899
View Product Details >

Sensorex S8000, Sensor Holder, Non-ATC, Ground Pin - EA899




Item #SEN-EA899
BrandSensorex
Price: $177.39
Quantity:

S8000, Sensor Holder, Non-ATC, Ground Pin


Sensorex S8000, ATC Sensor Holder, TC= - EA899TC
View Product Details >

Sensorex S8000, ATC Sensor Holder, TC= - EA899TC




Item #SEN-EA899TC
BrandSensorex
Price: $230.86
Quantity:

S8000, ATC Sensor Holder, TC=


Sensorex S8000, ATC Sensor Holder, TC=P1K - EA899TC/P1K
View Product Details >

Sensorex S8000, ATC Sensor Holder, TC=P1K - EA899TC/P1K




Item #SEN-EA899TC-P1K
BrandSensorex
Price: $230.86
Quantity:

S8000, ATC Sensor Holder, TC=P1K


Sensorex S8000, ATC Sensor Holder, TC=PT1 - EA899TC/PT1
View Product Details >

Sensorex S8000, ATC Sensor Holder, TC=PT1 - EA899TC/PT1




Item #SEN-EA899TC-PT1
BrandSensorex
Price: $230.86
Quantity:

S8000, ATC Sensor Holder, TC=PT1


Sensorex S8000, Unity Gain Amplifier (pH Amp) - EM800
View Product Details >

Sensorex S8000, Unity Gain Amplifier (pH Amp) - EM800




Item #SEN-EM800
BrandSensorex
Price: $196.94
Quantity:

S8000, Unity Gain Amplifier (pH Amp)


Sensorex S8000, Module, Diff Amplifier - EM801
View Product Details >

Sensorex S8000, Module, Diff Amplifier - EM801




Item #SEN-EM801
BrandSensorex
Price: $268.24
Quantity:

S8000, Module, Diff Amplifier


Sensorex Extension Cable, (1 meter) - EXT CABLE
View Product Details >

Sensorex Extension Cable, (1 meter) - EXT CABLE




Item #SEN-EXT-CABLE
BrandSensorex
Price: $49.74
Quantity:

Extension Cable, (1 meter)


Sensorex Extension ATC Cable, (1 meter) - EXT TC CABLE
View Product Details >

Sensorex Extension ATC Cable, (1 meter) - EXT TC CABLE




Item #SEN-EXT-TC-CABLE
BrandSensorex
Price: $49.74
Quantity:

Extension ATC Cable, (1 meter)


Sensorex Extension Waterproof Cable, (1 meter) - EXT W CABLE
View Product Details >

Sensorex Extension Waterproof Cable, (1 meter) - EXT W CABLE




Item #SEN-EXT-W-CABLE
BrandSensorex
Price: $49.74
Quantity:

Extension Waterproof Cable, (1 meter)


Sensorex Viton Gasket for S600 Series, 1 each - GS962
View Product Details >

Sensorex Viton Gasket for S600 Series, 1 each - GS962




Item #SEN-GS962
BrandSensorex
Price: $3.45
Quantity:

Viton Gasket for S600 Series, 1 each


Sensorex Insertion Tube, S675, 570148 - INSA-012
View Product Details >

Sensorex Insertion Tube, S675, 570148 - INSA-012




Item #SEN-INSA-012
BrandSensorex
Price: $288.36
Quantity:

Insertion Tube, S675, 570148


Sensorex Insertion Tube, S675K, PVDF 570080 - INSA-012K
View Product Details >

Sensorex Insertion Tube, S675K, PVDF 570080 - INSA-012K




Item #SEN-INSA-012K
BrandSensorex
Price: $565.80
Quantity:

Insertion Tube, S675K, PVDF 570080


Sensorex Insert Tube for S675, - INSA-012TC
View Product Details >

Sensorex Insert Tube for S675, - INSA-012TC




Item #SEN-INSA-012TC
BrandSensorex
Price: $508.88
Quantity:

Insert Tube for S675,


Sensorex Insert Tube for S675K, - INSA-012TK
View Product Details >

Sensorex Insert Tube for S675K, - INSA-012TK




Item #SEN-INSA-012TK
BrandSensorex
Price: $611.51
Quantity:

Insert Tube for S675K,


Sensorex Insertion Tube, S676, 570085 - INSA-018
View Product Details >

Sensorex Insertion Tube, S676, 570085 - INSA-018




Item #SEN-INSA-018
BrandSensorex
Price: $402.50
Quantity:

Insertion Tube, S676, 570085


Sensorex Insert Tube Assembly for S676, - INSA-018TC
View Product Details >

Sensorex Insert Tube Assembly for S676, - INSA-018TC




Item #SEN-INSA-018TC
BrandSensorex
Price: $632.79
Quantity:

Insert Tube Assembly for S676,


Sensorex S677 Insertion Tube 24", 570086 - INSA-024
View Product Details >

Sensorex S677 Insertion Tube 24", 570086 - INSA-024




Item #SEN-INSA-024
BrandSensorex
Price: $425.21
Quantity:

S677 Insertion Tube 24", 570086


Sensorex S677 Insert Tube Sub Assembly - INSA-024TC
View Product Details >

Sensorex S677 Insert Tube Sub Assembly - INSA-024TC




Item #SEN-INSA-024TC
BrandSensorex
Price: $731.69
Quantity:

S677 Insert Tube Sub Assembly


Sensorex Adapter Body, 170171A - INSA-AB171
View Product Details >

Sensorex Adapter Body, 170171A - INSA-AB171




Item #SEN-INSA-AB171
BrandSensorex
Price: $135.41
Quantity:

Adapter Body, 170171A


Sensorex Cable Connection, S675, 270111 - INSA-CC111
View Product Details >

Sensorex Cable Connection, S675, 270111 - INSA-CC111




Item #SEN-INSA-CC111
BrandSensorex
Price: $8.63
Quantity:

Cable Connection, S675, 270111


Sensorex S675 Compress Seal & Insert Clamp, 270131 - INSA-CL131
View Product Details >

Sensorex S675 Compress Seal & Insert Clamp, 270131 - INSA-CL131




Item #SEN-INSA-CL131
BrandSensorex
Price: $24.32
Quantity:

S675 Compress Seal & Insert Clamp, 270131


Sensorex S675 White Slip Nut, 270121 - INSA-NUT111
View Product Details >

Sensorex S675 White Slip Nut, 270121 - INSA-NUT111




Item #SEN-INSA-NUT111
BrandSensorex
Price: $4.60
Quantity:

S675 White Slip Nut, 270121


Sensorex S675 White Slip Nut, 270121 - INSA-NUT121
View Product Details >

Sensorex S675 White Slip Nut, 270121 - INSA-NUT121




Item #SEN-INSA-NUT121
BrandSensorex
Price: $8.63
Quantity:

S675 White Slip Nut, 270121


Sensorex POM Nut for S675K & S675TK - INSA-NUT205
View Product Details >

Sensorex POM Nut for S675K & S675TK - INSA-NUT205




Item #SEN-INSA-NUT205
BrandSensorex
Price: $106.95
Quantity:

POM Nut for S675K & S675TK


Sensorex O-Ring , FKM, Brown, 270126 - INSA-OR126
View Product Details >

Sensorex O-Ring , FKM, Brown, 270126 - INSA-OR126




Item #SEN-INSA-OR126
BrandSensorex
Price: $4.89
Quantity:

O-Ring , FKM, Brown, 270126


Sensorex Packing Gland O'Ring, S675, 270130 - INSA-OR130
View Product Details >

Sensorex Packing Gland O'Ring, S675, 270130 - INSA-OR130




Item #SEN-INSA-OR130
BrandSensorex
Price: $4.89
Quantity:

Packing Gland O'Ring, S675, 270130


Sensorex O-Ring for PG234 in S675K & S675TK - INSA-OR151
View Product Details >

Sensorex O-Ring for PG234 in S675K & S675TK - INSA-OR151




Item #SEN-INSA-OR151
BrandSensorex
Price: $5.18
Quantity:

O-Ring for PG234 in S675K & S675TK


Sensorex Packing Gland, S675, 170170D - INSA-PG170
View Product Details >

Sensorex Packing Gland, S675, 170170D - INSA-PG170




Item #SEN-INSA-PG170
BrandSensorex
Price: $74.18
Quantity:

Packing Gland, S675, 170170D


Sensorex Retainer, Stainless, 170162 - INSA-RET162
View Product Details >

Sensorex Retainer, Stainless, 170162 - INSA-RET162




Item #SEN-INSA-RET162
BrandSensorex
Price: $11.79
Quantity:

Retainer, Stainless, 170162


Sensorex Preamp Used with ECD/GF Signet, Model= - PA-EC1
View Product Details >

Sensorex Preamp Used with ECD/GF Signet, Model= - PA-EC1




Item #SEN-PA-EC1
BrandSensorex
Price: $450.23
Quantity:

Preamp Used with ECD/GF Signet, Model=


Sensorex Preamp Used with GF Signet 9030 - PA-GF9030
View Product Details >

Sensorex Preamp Used with GF Signet 9030 - PA-GF9030




Item #SEN-PA-GF9030
BrandSensorex
Price: $376.34
Quantity:

Preamp Used with GF Signet 9030


Sensorex Preamp Used with GLI/Hach, Model= - PA-GL90A
View Product Details >

Sensorex Preamp Used with GLI/Hach, Model= - PA-GL90A




Item #SEN-PA-GL90A
BrandSensorex
Price: $450.23
Quantity:

Preamp Used with GLI/Hach, Model=


Sensorex Preamp used with GLI/Hach, Model= - PA-GL90B
View Product Details >

Sensorex Preamp used with GLI/Hach, Model= - PA-GL90B




Item #SEN-PA-GL90B
BrandSensorex
Price: $450.23
Quantity:

Preamp used with GLI/Hach, Model=


Sensorex Preamp used with Lakewood Instr., Model= - PA-LIA
View Product Details >

Sensorex Preamp used with Lakewood Instr., Model= - PA-LIA




Item #SEN-PA-LIA
BrandSensorex
Price: $450.23
Quantity:

Preamp used with Lakewood Instr., Model=


Sensorex Preamp used with Rosemount, Model= - PA-SDI
View Product Details >

Sensorex Preamp used with Rosemount, Model= - PA-SDI




Item #SEN-PA-SDI
BrandSensorex
Price: $493.93
Quantity:

Preamp used with Rosemount, Model=


Sensorex Preamp used with GF Signet, Model= - PA-SSA
View Product Details >

Sensorex Preamp used with GF Signet, Model= - PA-SSA




Item #SEN-PA-SSA
BrandSensorex
Price: $450.23
Quantity:

Preamp used with GF Signet, Model=


Sensorex Preamp used with GF Signet, Model= - PA-SSA2
View Product Details >

Sensorex Preamp used with GF Signet, Model= - PA-SSA2




Item #SEN-PA-SSA2
BrandSensorex
Price: $450.23
Quantity:

Preamp used with GF Signet, Model=


Sensorex Preamp used with TBI Bailey, Model= - PA-TBA
View Product Details >

Sensorex Preamp used with TBI Bailey, Model= - PA-TBA




Item #SEN-PA-TBA
BrandSensorex
Price: $450.23
Quantity:

Preamp used with TBI Bailey, Model=


Sensorex Preamp used with Rosemount/Uniloc, Model= - PA-U2587
View Product Details >

Sensorex Preamp used with Rosemount/Uniloc, Model= - PA-U2587




Item #SEN-PA-U2587
BrandSensorex
Price: $493.93
Quantity:

Preamp used with Rosemount/Uniloc, Model=


Sensorex Preamp for Rosemount/Uniloc /TBI, Model= - PA-U698-03
View Product Details >

Sensorex Preamp for Rosemount/Uniloc /TBI, Model= - PA-U698-03




Item #SEN-PA-U698-03
BrandSensorex
Price: $450.23
Quantity:

Preamp for Rosemount/Uniloc /TBI, Model=


Sensorex Preamp used with Rosemount/Uniloc, Model= - PA-UVA
View Product Details >

Sensorex Preamp used with Rosemount/Uniloc, Model= - PA-UVA




Item #SEN-PA-UVA
BrandSensorex
Price: $450.23
Quantity:

Preamp used with Rosemount/Uniloc, Model=


Sensorex Preamp for Foxboro/Honeywell/L&N, Model= - PA-V1
View Product Details >

Sensorex Preamp for Foxboro/Honeywell/L&N, Model= - PA-V1




Item #SEN-PA-V1
BrandSensorex
Price: $450.23
Quantity:

Preamp for Foxboro/Honeywell/L&N, Model=


Sensorex Preamp used with L&N 7076 or 7079 - PA-V1-LN
View Product Details >

Sensorex Preamp used with L&N 7076 or 7079 - PA-V1-LN




Item #SEN-PA-V1-LN
BrandSensorex
Price: $450.23
Quantity:

Preamp used with L&N 7076 or 7079


Sensorex Preamp used with Invensys/Foxboro, Model= - PA-V2
View Product Details >

Sensorex Preamp used with Invensys/Foxboro, Model= - PA-V2




Item #SEN-PA-V2
BrandSensorex
Price: $450.23
Quantity:

Preamp used with Invensys/Foxboro, Model=


Sensorex Smart Sensors Remote Electronics - SSRE
View Product Details >

Sensorex Smart Sensors Remote Electronics - SSRE




Item #SEN-SSRE
BrandSensorex
Price: $537.63
Quantity:

Smart Sensors Remote Electronics


Sensorex Cond SSRE 4-20mA, DIN Rail - SSRE-C-MA-DR
View Product Details >

Sensorex Cond SSRE 4-20mA, DIN Rail - SSRE-C-MA-DR




Item #SEN-SSRE-C-MA-DR
BrandSensorex
Price: $351.90
Quantity:

Cond SSRE 4-20mA, DIN Rail


Sensorex Cond SSRE 4-20mA, 4X Enclosure - SSRE-C-MA-EN
View Product Details >

Sensorex Cond SSRE 4-20mA, 4X Enclosure - SSRE-C-MA-EN




Item #SEN-SSRE-C-MA-EN
BrandSensorex
Price: $351.90
Quantity:

Cond SSRE 4-20mA, 4X Enclosure


Sensorex Cond SSRE MODBUS, DIN Rail - SSRE-C-MB-DR
View Product Details >

Sensorex Cond SSRE MODBUS, DIN Rail - SSRE-C-MB-DR




Item #SEN-SSRE-C-MB-DR
BrandSensorex
Price: $351.90
Quantity:

Cond SSRE MODBUS, DIN Rail


Sensorex Cond SSRE MODBUS, 4X Enclosure - SSRE-C-MB-EN
View Product Details >

Sensorex Cond SSRE MODBUS, 4X Enclosure - SSRE-C-MB-EN




Item #SEN-SSRE-C-MB-EN
BrandSensorex
Price: $351.90
Quantity:

Cond SSRE MODBUS, 4X Enclosure


Sensorex DO SSRE 4-20mA, DIN Rail - SSRE-D-MA-DR
View Product Details >

Sensorex DO SSRE 4-20mA, DIN Rail - SSRE-D-MA-DR




Item #SEN-SSRE-D-MA-DR
BrandSensorex
Price: $351.90
Quantity:

DO SSRE 4-20mA, DIN Rail


Sensorex DO SSRE 4-20mA, 4X Enclosure - SSRE-D-MA-EN
View Product Details >

Sensorex DO SSRE 4-20mA, 4X Enclosure - SSRE-D-MA-EN




Item #SEN-SSRE-D-MA-EN
BrandSensorex
Price: $351.90
Quantity:

DO SSRE 4-20mA, 4X Enclosure


Sensorex DO SSRE MODBUS DIN Rail - SSRE-D-MB-DR
View Product Details >

Sensorex DO SSRE MODBUS DIN Rail - SSRE-D-MB-DR




Item #SEN-SSRE-D-MB-DR
BrandSensorex
Price: $351.90
Quantity:

DO SSRE MODBUS DIN Rail


Sensorex DO SSRE MODBUS, 4X Enclosure - SSRE-D-MB-EN
View Product Details >

Sensorex DO SSRE MODBUS, 4X Enclosure - SSRE-D-MB-EN




Item #SEN-SSRE-D-MB-EN
BrandSensorex
Price: $351.90
Quantity:

DO SSRE MODBUS, 4X Enclosure


Sensorex Smart Remote Electronics, ORP, 4-20 mA output, DIN Rail Mount - SSRE-O-MA/DR
View Product Details >

Sensorex Smart Remote Electronics, ORP, 4-20 mA output, DIN Rail Mount - SSRE-O-MA/DR




Item #SEN-SSRE-O-MA-DR
BrandSensorex
Price: $431.25
Quantity:

SSRE-O-MA/DR Smart Remote Electronics, ORP, 4-20 mA output, DIN Rail Mount by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

  • Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
  • Save on costs by only replacing the sensor; keep remote electronics and cabling in place
  • Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

  • pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
  • Simple wiring for each measurement type

Two Versions for Your Ideal Application

  • Interface module for DIN Rail installation
  • Enclosure box for wall or panel mounting
Sensorex Smart Remote Electronics, ORP, 4-20 mA output, UL Enclosure - SSRE-O-MA/EN
View Product Details >

Sensorex Smart Remote Electronics, ORP, 4-20 mA output, UL Enclosure - SSRE-O-MA/EN




Item #SEN-SSRE-O-MA-EN
BrandSensorex
Price: $431.25
Quantity:

SSRE-O-MA/EN Smart Remote Electronics, ORP, 4-20 mA output, UL Enclosure by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

  • Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
  • Save on costs by only replacing the sensor; keep remote electronics and cabling in place
  • Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

  • pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
  • Simple wiring for each measurement type

Two Versions for Your Ideal Application

  • Interface module for DIN Rail installation
  • Enclosure box for wall or panel mounting
Sensorex Smart Remote Electronics, ORP, Modbus 485 output, DIN Rail Mount - SSRE-O-MB/DR
View Product Details >

Sensorex Smart Remote Electronics, ORP, Modbus 485 output, DIN Rail Mount - SSRE-O-MB/DR




Item #SEN-SSRE-O-MB-DR
BrandSensorex
Price: $431.25
Quantity:

SSRE-O-MB/DR Smart Remote Electronics, ORP, Modbus 485 output, DIN Rail Mount by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

  • Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
  • Save on costs by only replacing the sensor; keep remote electronics and cabling in place
  • Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

  • pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
  • Simple wiring for each measurement type

Two Versions for Your Ideal Application

  • Interface module for DIN Rail installation
  • Enclosure box for wall or panel mounting
Sensorex Smart Remote Electronics, ORP, Modbus 485 output, UL Enclosure - SSRE-O-MB/EN
View Product Details >

Sensorex Smart Remote Electronics, ORP, Modbus 485 output, UL Enclosure - SSRE-O-MB/EN




Item #SEN-SSRE-O-MB-EN
BrandSensorex
Price: $431.25
Quantity:

SSRE-O-MB/EN Smart Remote Electronics, ORP, Modbus 485 output, UL Enclosure by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

  • Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
  • Save on costs by only replacing the sensor; keep remote electronics and cabling in place
  • Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

  • pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
  • Simple wiring for each measurement type

Two Versions for Your Ideal Application

  • Interface module for DIN Rail installation
  • Enclosure box for wall or panel mounting
Sensorex Smart Remote Electronics, pH, 4-20 mA output, DIN Rail Mount - SSRE-P-MA/DR
View Product Details >

Sensorex Smart Remote Electronics, pH, 4-20 mA output, DIN Rail Mount - SSRE-P-MA/DR




Item #SEN-SSRE-P-MA-DR
BrandSensorex
Price: $431.25
Quantity:

SSRE-P-MA/DR Smart Remote Electronics, pH, 4-20 mA output, DIN Rail Mount by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

  • Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
  • Save on costs by only replacing the sensor; keep remote electronics and cabling in place
  • Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

  • pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
  • Simple wiring for each measurement type

Two Versions for Your Ideal Application

  • Interface module for DIN Rail installation
  • Enclosure box for wall or panel mounting
Sensorex Smart Remote Electronics, pH, 4-20 mA output, UL Enclosure - SSRE-P-MA/EN
View Product Details >

Sensorex Smart Remote Electronics, pH, 4-20 mA output, UL Enclosure - SSRE-P-MA/EN




Item #SEN-SSRE-P-MA-EN
BrandSensorex
Price: $431.25
Quantity:

SSRE-P-MA/EN Smart Remote Electronics, pH, 4-20 mA output, UL Enclosure by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

  • Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
  • Save on costs by only replacing the sensor; keep remote electronics and cabling in place
  • Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

  • pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
  • Simple wiring for each measurement type

Two Versions for Your Ideal Application

  • Interface module for DIN Rail installation
  • Enclosure box for wall or panel mounting
Sensorex Smart Remote Electronics, pH, Modbus 485 output, DIN Rail Mount - SSRE-P-MB/DR
View Product Details >

Sensorex Smart Remote Electronics, pH, Modbus 485 output, DIN Rail Mount - SSRE-P-MB/DR




Item #SEN-SSRE-P-MB-DR
BrandSensorex
Price: $431.25
Quantity:

SSRE-P-MB/DR Smart Remote Electronics, pH, Modbus 485 output, DIN Rail Mount by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

  • Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
  • Save on costs by only replacing the sensor; keep remote electronics and cabling in place
  • Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

  • pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
  • Simple wiring for each measurement type

Two Versions for Your Ideal Application

  • Interface module for DIN Rail installation
  • Enclosure box for wall or panel mounting
Sensorex Smart Remote Electronics, pH, Modbus 485 output, UL Enclosure - SSRE-P-MB/EN
View Product Details >

Sensorex Smart Remote Electronics, pH, Modbus 485 output, UL Enclosure - SSRE-P-MB/EN




Item #SEN-SSRE-P-MB-EN
BrandSensorex
Price: $431.25
Quantity:

SSRE-P-MB/EN Smart Remote Electronics, pH, Modbus 485 output, UL Enclosure by Sensorex

Thank you for choosing Sensorex Smart Sensor Remote Electronics. This instruction manual covers all remote electronics modules for PH, ORP, DO, contact conductivity(CCOND), toroidal conductivity(TOR), free chlorine(FCL) and chlorine dioxide(CLD) sensors. The remote electonics modules are offered in DIN Rail and blind enclosure version. Output for the modules (either Modbus RTU or 4-20mA) is marked on the product label.

Convert Analog Sensors into Smart Sensors

  • Reduce inventory by stocking analog sensors and wire them to remote electronics to output a digital communication signal (4-20 mA or Modbus)
  • Save on costs by only replacing the sensor; keep remote electronics and cabling in place
  • Improve environmental impact by eliminating electronics waste after sensor end of life

Compatible with a Comprehensive Set of Measurements

  • pH/ORP, Contacting Conductivity, Toroidal Conductivity, Dissolved Oxygen, Free Chlorine, and Chlorine Dioxide
  • Simple wiring for each measurement type

Two Versions for Your Ideal Application

  • Interface module for DIN Rail installation
  • Enclosure box for wall or panel mounting
Sensorex Toroidal SSRE 4-20mA, DIN Rail - SSRE-T-MA-DR
View Product Details >

Sensorex Toroidal SSRE 4-20mA, DIN Rail - SSRE-T-MA-DR




Item #SEN-SSRE-T-MA-DR
BrandSensorex
Price: $351.90
Quantity:

Toroidal SSRE 4-20mA, DIN Rail


Sensorex Toroidal SSRE 4-20mA, 4X Enclosure - SSRE-T-MA-EN
View Product Details >

Sensorex Toroidal SSRE 4-20mA, 4X Enclosure - SSRE-T-MA-EN




Item #SEN-SSRE-T-MA-EN
BrandSensorex
Price: $351.90
Quantity:

Toroidal SSRE 4-20mA, 4X Enclosure


Sensorex Toroidal SSRE MODBUS, DIN Rail - SSRE-T-MB-DR
View Product Details >

Sensorex Toroidal SSRE MODBUS, DIN Rail - SSRE-T-MB-DR




Item #SEN-SSRE-T-MB-DR
BrandSensorex
Price: $351.90
Quantity:

Toroidal SSRE MODBUS, DIN Rail


Sensorex Toroidal SSRE MODBUS, 4X Enclosure - SSRE-T-MB-EN
View Product Details >

Sensorex Toroidal SSRE MODBUS, 4X Enclosure - SSRE-T-MB-EN




Item #SEN-SSRE-T-MB-EN
BrandSensorex
Price: $351.90
Quantity:

Toroidal SSRE MODBUS, 4X Enclosure


Sensorex Replacement Cap for SS Optical DO Probe - ODOA80
View Product Details >

Sensorex Replacement Cap for SS Optical DO Probe - ODOA80




Item #SEN-ODOA80
BrandSensorex
Price: $364.55
Quantity:

Replacement Cap for SS Optical DO Probe


Sensorex 1" Adapter for ODO8000 Sensor - ODOA81
View Product Details >

Sensorex 1" Adapter for ODO8000 Sensor - ODOA81




Item #SEN-ODOA81
BrandSensorex
Price: $274.28
Quantity:

1" Adapter for ODO8000 Sensor


Sensorex O-Ring, FKM, Brown, 270124, S600'S - OR124
View Product Details >

Sensorex O-Ring, FKM, Brown, 270124, S600'S - OR124




Item #SEN-OR124
BrandSensorex
Price: $4.89
Quantity:

O-Ring, FKM, Brown, 270124, S600'S


Sensorex O-Ring, Black FKM for DO6000, 270403 - OR403
View Product Details >

Sensorex O-Ring, Black FKM for DO6000, 270403 - OR403




Item #SEN-OR403
BrandSensorex
Price: $4.89
Quantity:

O-Ring, Black FKM for DO6000, 270403


Sensorex Battery-Powered pH/ORP Pre-Amplifier - PHAMP-1
View Product Details >

Sensorex Battery-Powered pH/ORP Pre-Amplifier - PHAMP-1




Item #SEN-PHAMP-1
BrandSensorex
Price: $229.43
Quantity:

PHAMP-1 Battery-Powered pH/ORP Pre-Amplifier by Sensorex

The PHAMP-1 is a battery-powered unity-gain preamplifier that allows the user to run cables up to 1000 feet between the electrode and pH/ORP controller/meter. The PHAMP-1 should be located close to the electrode for optimum use. High impedance pH signals are reduced from megohms to under 20,000 ohms. By locating the device near the electrode, the service life of the electrodes can be enhanced through the elimination of noise from cable runs. Sealed to keep out moisture, the PHAMP-1 is self powered by two three-volt lithium cells and has an estimated lifetime of three years. Simply plug in any pH or ORP electrode equipped with a BNC connector, plug in the extension cable and then you are finished!

  • Provides for long cable runs
  • Extends electrode service life
  • Easy installation
  • Works with almost any make or model pH/ORP controller
  • Lithium cells for long service life
Sensorex Protective Caps - PRO-CAPS
View Product Details >

Sensorex Protective Caps - PRO-CAPS




Item #SEN-PRO-CAPS
BrandSensorex
Price: $1.38
Quantity:

Protective Caps


Sensorex Adapter, 3mm/2mm - A032
View Product Details >

Sensorex Adapter, 3mm/2mm - A032




Item #SEN-A032
BrandSensorex
Price: $30.76
Quantity:

Adapter, 3mm/2mm


Sensorex Electrode Stand - ES100
View Product Details >

Sensorex Electrode Stand - ES100




Item #SEN-ES100
BrandSensorex
Price: $336.50
Quantity:

ES100 Electrode Stand by Sensorex

The Sensorex ES100 holds electrode steady, right where you want them. Flex arm lets you lift and lower, rotate and lock in position effortlessly. Sturdy base ensures your sensors won't tip or slide. Holds up to two electrodes along with space for a temperature sensor. Cable clip on arm reduces clutter and keeps cable out of harms way.

Sensorex 3.5M KCl/AgCl Gel, 1 gallon - S018/G
View Product Details >

Sensorex 3.5M KCl/AgCl Gel, 1 gallon - S018/G




Item #SEN-S018-G
BrandSensorex
Price: $24.15
Quantity:

3.5M KCl/AgCl Gel, 1 gallon


Sensorex 3.5M KCl/AgCl Gel, 1oz - S018/S
View Product Details >

Sensorex 3.5M KCl/AgCl Gel, 1oz - S018/S




Item #SEN-S018-S
BrandSensorex
Price: $23.86
Quantity:

3.5M KCl/AgCl Gel, 1oz


Sensorex Saturated KNO3 Gel, 1 gallon - S019/G
View Product Details >

Sensorex Saturated KNO3 Gel, 1 gallon - S019/G




Item #SEN-S019-G
BrandSensorex
Price: $24.15
Quantity:

Saturated KNO3 Gel, 1 gallon


Sensorex 3.5M KCl Refill Solution, 4oz - S020-BCI
View Product Details >

Sensorex 3.5M KCl Refill Solution, 4oz - S020-BCI




Item #SEN-S020-BCI
BrandSensorex
Price: $31.91
Quantity:

S020-BCI 3.5M KCl Refill Solution, 4oz by Sensorex

Refillable sensors can maintain accuracy for longer time periods. This sensor type requires re-filling with KCl solution when the liquid level is about 1" below the re-fill hole. To do this, slide the protective outer sleeve up to expose the filling hole and fill the electrode to the hole level with KCl (potassium chloride) solution. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 1000ppm/1417uS, 1Qt - TDS1000
View Product Details >

Sensorex Conductivity Solution, 1000ppm/1417uS, 1Qt - TDS1000




Item #SEN-TDS1000
BrandSensorex
Price: $28.18
Quantity:

TDS1000 Conductivity Solution, 1000ppm/1417uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 1000ppm/1417uS, 1 Gal. - TDS1000/G
View Product Details >

Sensorex Conductivity Solution, 1000ppm/1417uS, 1 Gal. - TDS1000/G




Item #SEN-TDS1000-G
BrandSensorex
Price: $59.51
Quantity:

TDS1000/G Conductivity Solution, 1000ppm/1417uS, 1 Gal. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 1000ppm/1417uS, 1 Pt. - TDS1000/P
View Product Details >

Sensorex Conductivity Solution, 1000ppm/1417uS, 1 Pt. - TDS1000/P




Item #SEN-TDS1000-P
BrandSensorex
Price: $15.81
Quantity:

TDS1000/P Conductivity Solution, 1000ppm/1417uS, 1 Pt. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 15ppm/23.8uS, 1Qt - TDS15
View Product Details >

Sensorex Conductivity Solution, 15ppm/23.8uS, 1Qt - TDS15




Item #SEN-TDS15
BrandSensorex
Price: $28.18
Quantity:

TDS15 Conductivity Solution, 15ppm/23.8uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 15ppm/23.8uS, 1Gal - TDS15/G
View Product Details >

Sensorex Conductivity Solution, 15ppm/23.8uS, 1Gal - TDS15/G




Item #SEN-TDS15-G
BrandSensorex
Price: $59.51
Quantity:

TDS15/G Conductivity Solution, 15ppm/23.8uS, 1Gal by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 15ppm/23.8uS, 1 Pt. - TDS15/P
View Product Details >

Sensorex Conductivity Solution, 15ppm/23.8uS, 1 Pt. - TDS15/P




Item #SEN-TDS15-P
BrandSensorex
Price: $15.81
Quantity:

TDS15/P Conductivity Solution, 15ppm/23.8uS, 1 Pt. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 300ppm/445uS, 1Qt - TDS300
View Product Details >

Sensorex Conductivity Solution, 300ppm/445uS, 1Qt - TDS300




Item #SEN-TDS300
BrandSensorex
Price: $28.18
Quantity:

TDS300 Conductivity Solution, 300ppm/445uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 300ppm/445uS, 1Gal - TDS300/G
View Product Details >

Sensorex Conductivity Solution, 300ppm/445uS, 1Gal - TDS300/G




Item #SEN-TDS300-G
BrandSensorex
Price: $59.51
Quantity:

TDS300/G Conductivity Solution, 300ppm/445uS, 1Gal by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 300ppm/445uS, 1Pt - TDS300/P
View Product Details >

Sensorex Conductivity Solution, 300ppm/445uS, 1Pt - TDS300/P




Item #SEN-TDS300-P
BrandSensorex
Price: $15.81
Quantity:

TDS300/P Conductivity Solution, 300ppm/445uS, 1Pt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution,32.8ppm/70uS, 1Qt - TDSK70
View Product Details >

Sensorex Conductivity Solution,32.8ppm/70uS, 1Qt - TDSK70




Item #SEN-TDSK70
BrandSensorex
Price: $28.18
Quantity:

TDSK70 Conductivity Solution,32.8ppm/70uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution,32.8ppm/70uS, 1 Gal. - TDSK70/G
View Product Details >

Sensorex Conductivity Solution,32.8ppm/70uS, 1 Gal. - TDSK70/G




Item #SEN-TDSK70-G
BrandSensorex
Price: $59.51
Quantity:

TDSK70/G Conductivity Solution,32.8ppm/70uS, 1 Gal. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 6956ppm/12,500uS, 1Qt - TDSNA12.5
View Product Details >

Sensorex Conductivity Solution, 6956ppm/12,500uS, 1Qt - TDSNA12.5




Item #SEN-TDSNA12-5
BrandSensorex
Price: $28.18
Quantity:

TDSNA12.5 Conductivity Solution, 6956ppm/12,500uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 6956ppm/12,500uS, 1 Gal. - TDSNA12.5/G
View Product Details >

Sensorex Conductivity Solution, 6956ppm/12,500uS, 1 Gal. - TDSNA12.5/G




Item #SEN-TDSNA12-5-G
BrandSensorex
Price: $59.51
Quantity:

TDSNA12.5/G Conductivity Solution, 6956ppm/12,500uS, 1 Gal. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 150ppm/229uS, 1Qt - TDS150
View Product Details >

Sensorex Conductivity Solution, 150ppm/229uS, 1Qt - TDS150




Item #SEN-TDS150
BrandSensorex
Price: $28.18
Quantity:

TDS150 Conductivity Solution, 150ppm/229uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 150ppm/229uS, 1 Gal - TDS150/G
View Product Details >

Sensorex Conductivity Solution, 150ppm/229uS, 1 Gal - TDS150/G




Item #SEN-TDS150-G
BrandSensorex
Price: $59.51
Quantity:

TDS150/G Conductivity Solution, 150ppm/229uS, 1 Gal by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 150ppm/229uS, 1Pt - TDS150/P
View Product Details >

Sensorex Conductivity Solution, 150ppm/229uS, 1Pt - TDS150/P




Item #SEN-TDS150-P
BrandSensorex
Price: $15.81
Quantity:

TDS150/P Conductivity Solution, 150ppm/229uS, 1Pt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 1500ppm/2060uS, 1Qt (946ml) - TDS1500
View Product Details >

Sensorex Conductivity Solution, 1500ppm/2060uS, 1Qt (946ml) - TDS1500




Item #SEN-TDS1500
BrandSensorex
Price: $28.18
Quantity:

TDS1500 Conductivity Solution, 1500ppm/2060uS, 1Qt (946ml) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 1500ppm/2060uS, 1 Gal. - TDS1500/G
View Product Details >

Sensorex Conductivity Solution, 1500ppm/2060uS, 1 Gal. - TDS1500/G




Item #SEN-TDS1500-G
BrandSensorex
Price: $59.51
Quantity:

TDS1500/G Conductivity Solution, 1500ppm/2060uS, 1 Gal. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution 1500 ppm, Pt Bottle - TDS1500/P
View Product Details >

Sensorex Conductivity Solution 1500 ppm, Pt Bottle - TDS1500/P




Item #SEN-TDS1500-P
BrandSensorex
Price: $15.81
Quantity:

TDS1500/P Conductivity Solution 1500 ppm, Pt Bottle by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 15,000ppm/16,630uS, 1Qt - TDS15000
View Product Details >

Sensorex Conductivity Solution, 15,000ppm/16,630uS, 1Qt - TDS15000




Item #SEN-TDS15000
BrandSensorex
Price: $28.18
Quantity:

TDS15000 Conductivity Solution, 15,000ppm/16,630uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 15,000ppm/16,630uS, 1Gal - TDS15000/G
View Product Details >

Sensorex Conductivity Solution, 15,000ppm/16,630uS, 1Gal - TDS15000/G




Item #SEN-TDS15000-G
BrandSensorex
Price: $59.51
Quantity:

TDS15000/G Conductivity Solution, 15,000ppm/16,630uS, 1Gal by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 15,000ppm/16,630uS, 1Pt - TDS15000/P
View Product Details >

Sensorex Conductivity Solution, 15,000ppm/16,630uS, 1Pt - TDS15000/P




Item #SEN-TDS15000-P
BrandSensorex
Price: $15.81
Quantity:

TDS15000/P Conductivity Solution, 15,000ppm/16,630uS, 1Pt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution,11.4ppm/18uS, 1Qt - TDS18
View Product Details >

Sensorex Conductivity Solution,11.4ppm/18uS, 1Qt - TDS18




Item #SEN-TDS18
BrandSensorex
Price: $28.18
Quantity:

TDS18 Conductivity Solution,11.4ppm/18uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 30ppm/46.7uS, 1Qt - TDS30
View Product Details >

Sensorex Conductivity Solution, 30ppm/46.7uS, 1Qt - TDS30




Item #SEN-TDS30
BrandSensorex
Price: $28.18
Quantity:

TDS30 Conductivity Solution, 30ppm/46.7uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 30ppm/46.7uS, 1Gal - TDS30/G
View Product Details >

Sensorex Conductivity Solution, 30ppm/46.7uS, 1Gal - TDS30/G




Item #SEN-TDS30-G
BrandSensorex
Price: $59.51
Quantity:

TDS30/G Conductivity Solution, 30ppm/46.7uS, 1Gal by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 30ppm/46.7uS, 1 Pt. - TDS30/P
View Product Details >

Sensorex Conductivity Solution, 30ppm/46.7uS, 1 Pt. - TDS30/P




Item #SEN-TDS30-P
BrandSensorex
Price: $15.81
Quantity:

TDS30/P Conductivity Solution, 30ppm/46.7uS, 1 Pt. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 3000ppm/3900uS, 1Qt - TDS3000
View Product Details >

Sensorex Conductivity Solution, 3000ppm/3900uS, 1Qt - TDS3000




Item #SEN-TDS3000
BrandSensorex
Price: $28.18
Quantity:

TDS3000 Conductivity Solution, 3000ppm/3900uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 3000ppm/3900uS, 1Gal - TDS3000/G
View Product Details >

Sensorex Conductivity Solution, 3000ppm/3900uS, 1Gal - TDS3000/G




Item #SEN-TDS3000-G
BrandSensorex
Price: $59.51
Quantity:

TDS3000/G Conductivity Solution, 3000ppm/3900uS, 1Gal by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 3000ppm/3900uS, 1Pt - TDS3000/P
View Product Details >

Sensorex Conductivity Solution, 3000ppm/3900uS, 1Pt - TDS3000/P




Item #SEN-TDS3000-P
BrandSensorex
Price: $15.81
Quantity:

TDS3000/P Conductivity Solution, 3000ppm/3900uS, 1Pt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 30,000ppm/30,100uS,1Qt - TDS30000
View Product Details >

Sensorex Conductivity Solution, 30,000ppm/30,100uS,1Qt - TDS30000




Item #SEN-TDS30000
BrandSensorex
Price: $28.18
Quantity:

TDS30000 Conductivity Solution, 30,000ppm/30,100uS,1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 30,000ppm/30,100uS,1Gal - TDS30000/G
View Product Details >

Sensorex Conductivity Solution, 30,000ppm/30,100uS,1Gal - TDS30000/G




Item #SEN-TDS30000-G
BrandSensorex
Price: $59.51
Quantity:

TDS30000/G Conductivity Solution, 30,000ppm/30,100uS,1Gal by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 30,000ppm/30,100uS,1Pt - TDS30000/P
View Product Details >

Sensorex Conductivity Solution, 30,000ppm/30,100uS,1Pt - TDS30000/P




Item #SEN-TDS30000-P
BrandSensorex
Price: $15.81
Quantity:

TDS30000/P Conductivity Solution, 30,000ppm/30,100uS,1Pt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 500ppm/731uS, 1Qrt - TDS500
View Product Details >

Sensorex Conductivity Solution, 500ppm/731uS, 1Qrt - TDS500




Item #SEN-TDS500
BrandSensorex
Price: $28.18
Quantity:

TDS500 Conductivity Solution, 500ppm/731uS, 1Qrt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution,500ppm/731uS,1 Gal - TDS500/G
View Product Details >

Sensorex Conductivity Solution,500ppm/731uS,1 Gal - TDS500/G




Item #SEN-TDS500-G
BrandSensorex
Price: $59.51
Quantity:

TDS500/G Conductivity Solution,500ppm/731uS,1 Gal by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 500ppm/731uS, 1Pt - TDS500/P
View Product Details >

Sensorex Conductivity Solution, 500ppm/731uS, 1Pt - TDS500/P




Item #SEN-TDS500-P
BrandSensorex
Price: $15.81
Quantity:

TDS500/P Conductivity Solution, 500ppm/731uS, 1Pt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 5687ppm/7000uS, 1Qrt - TDS5687
View Product Details >

Sensorex Conductivity Solution, 5687ppm/7000uS, 1Qrt - TDS5687




Item #SEN-TDS5687
BrandSensorex
Price: $28.18
Quantity:

TDS5687 Conductivity Solution, 5687ppm/7000uS, 1Qrt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 5687ppm/7000uS, 1Pt - TDS5687/P
View Product Details >

Sensorex Conductivity Solution, 5687ppm/7000uS, 1Pt - TDS5687/P




Item #SEN-TDS5687-P
BrandSensorex
Price: $15.81
Quantity:

TDS5687/P Conductivity Solution, 5687ppm/7000uS, 1Pt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 60,000ppm/60,000uS, 1Gal - TDS60000/G
View Product Details >

Sensorex Conductivity Solution, 60,000ppm/60,000uS, 1Gal - TDS60000/G




Item #SEN-TDS60000-G
BrandSensorex
Price: $59.51
Quantity:

TDS60000/G Conductivity Solution, 60,000ppm/60,000uS, 1Gal by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 60,000ppm/60,000uS, 1Pt1 - TDS60000/P
View Product Details >

Sensorex Conductivity Solution, 60,000ppm/60,000uS, 1Pt1 - TDS60000/P




Item #SEN-TDS60000-P
BrandSensorex
Price: $15.24
Quantity:

TDS60000/P Conductivity Solution, 60,000ppm/60,000uS, 1Pt1 by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 70ppm/105uS, 1Qt - TDS70
View Product Details >

Sensorex Conductivity Solution, 70ppm/105uS, 1Qt - TDS70




Item #SEN-TDS70
BrandSensorex
Price: $28.18
Quantity:

TDS70 Conductivity Solution, 70ppm/105uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 9523ppm/10,000uS, 1Qrt - TDS9523
View Product Details >

Sensorex Conductivity Solution, 9523ppm/10,000uS, 1Qrt - TDS9523




Item #SEN-TDS9523
BrandSensorex
Price: $28.18
Quantity:

TDS9523 Conductivity Solution, 9523ppm/10,000uS, 1Qrt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 9523ppm,10,000uS, 1Pt. - TDS9523/P
View Product Details >

Sensorex Conductivity Solution, 9523ppm,10,000uS, 1Pt. - TDS9523/P




Item #SEN-TDS9523-P
BrandSensorex
Price: $15.81
Quantity:

TDS9523/P Conductivity Solution, 9523ppm,10,000uS, 1Pt. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 100uS KCl, 1Qt. - TDSK100
View Product Details >

Sensorex Conductivity Solution, 100uS KCl, 1Qt. - TDSK100




Item #SEN-TDSK100
BrandSensorex
Price: $28.18
Quantity:

TDSK100 Conductivity Solution, 100uS KCl, 1Qt. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Standard Solution, 111.9mS (Qt) - TDSK111900
View Product Details >

Sensorex Conductivity Standard Solution, 111.9mS (Qt) - TDSK111900




Item #SEN-TDSK111900
BrandSensorex
Price: $28.18
Quantity:

TDSK111900 Conductivity Standard Solution, 111.9mS (Qt) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Standard Solution, 111.9mS (Gal) - TDSK111900/G
View Product Details >

Sensorex Conductivity Standard Solution, 111.9mS (Gal) - TDSK111900/G




Item #SEN-TDSK111900-G
BrandSensorex
Price: $59.51
Quantity:

TDSK111900/G Conductivity Standard Solution, 111.9mS (Gal) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Standard Solution, 111.9mS (Pt) - TDSK111900/P
View Product Details >

Sensorex Conductivity Standard Solution, 111.9mS (Pt) - TDSK111900/P




Item #SEN-TDSK111900-P
BrandSensorex
Price: $15.81
Quantity:

TDSK111900/P Conductivity Standard Solution, 111.9mS (Pt) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Potassium Chloride TDS Solution, 12880uS/cm (Pt) - TDSK12880/P
View Product Details >

Sensorex Potassium Chloride TDS Solution, 12880uS/cm (Pt) - TDSK12880/P




Item #SEN-TDSK12880-P
BrandSensorex
Price: $15.81
Quantity:

TDSK12880/P Potassium Chloride TDS Solution, 12880uS/cm (Pt) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 1413uS KCl, 1Qt. - TDSK1413
View Product Details >

Sensorex Conductivity Solution, 1413uS KCl, 1Qt. - TDSK1413




Item #SEN-TDSK1413
BrandSensorex
Price: $27.89
Quantity:

TDSK1413 Conductivity Solution, 1413uS KCl, 1Qt. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 1413uS KCl, 1Pt. - TDSK1413/P
View Product Details >

Sensorex Conductivity Solution, 1413uS KCl, 1Pt. - TDSK1413/P




Item #SEN-TDSK1413-P
BrandSensorex
Price: $14.66
Quantity:

TDSK1413/P Conductivity Solution, 1413uS KCl, 1Pt. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 8.4ppm/18uS, 1Qt. - TDSK18
View Product Details >

Sensorex Conductivity Solution, 8.4ppm/18uS, 1Qt. - TDSK18




Item #SEN-TDSK18
BrandSensorex
Price: $28.18
Quantity:

TDSK18 Conductivity Solution, 8.4ppm/18uS, 1Qt. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 8.4ppm/18uS, 1Gal - TDSK18/G
View Product Details >

Sensorex Conductivity Solution, 8.4ppm/18uS, 1Gal - TDSK18/G




Item #SEN-TDSK18-G
BrandSensorex
Price: $59.51
Quantity:

TDSK18/G Conductivity Solution, 8.4ppm/18uS, 1Gal by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 85.2ppm/180uS, 1Qt - TDSK180
View Product Details >

Sensorex Conductivity Solution, 85.2ppm/180uS, 1Qt - TDSK180




Item #SEN-TDSK180
BrandSensorex
Price: $28.18
Quantity:

TDSK180 Conductivity Solution, 85.2ppm/180uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 85.2ppm/180uS, 1 Gal - TDSK180/G
View Product Details >

Sensorex Conductivity Solution, 85.2ppm/180uS, 1 Gal - TDSK180/G




Item #SEN-TDSK180-G
BrandSensorex
Price: $59.51
Quantity:

TDSK180/G Conductivity Solution, 85.2ppm/180uS, 1 Gal by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 85.2ppm/180uS, 1Pt. - TDSK180/P
View Product Details >

Sensorex Conductivity Solution, 85.2ppm/180uS, 1Pt. - TDSK180/P




Item #SEN-TDSK180-P
BrandSensorex
Price: $15.81
Quantity:

TDSK180/P Conductivity Solution, 85.2ppm/180uS, 1Pt. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 901.6ppm/1800uS, 1Qt - TDSK1800
View Product Details >

Sensorex Conductivity Solution, 901.6ppm/1800uS, 1Qt - TDSK1800




Item #SEN-TDSK1800
BrandSensorex
Price: $28.18
Quantity:

TDSK1800 Conductivity Solution, 901.6ppm/1800uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 10,289ppm/18000uS,1Qt - TDSK18000
View Product Details >

Sensorex Conductivity Solution, 10,289ppm/18000uS,1Qt - TDSK18000




Item #SEN-TDSK18000
BrandSensorex
Price: $28.18
Quantity:

TDSK18000 Conductivity Solution, 10,289ppm/18000uS,1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 10,289ppm/18000uS,1Pt. - TDSK18000/P
View Product Details >

Sensorex Conductivity Solution, 10,289ppm/18000uS,1Pt. - TDSK18000/P




Item #SEN-TDSK18000-P
BrandSensorex
Price: $14.66
Quantity:

TDSK18000/P Conductivity Solution, 10,289ppm/18000uS,1Pt. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Standard Solution, 300,000uS (Qt) - TDSK300000
View Product Details >

Sensorex Conductivity Standard Solution, 300,000uS (Qt) - TDSK300000




Item #SEN-TDSK300000
BrandSensorex
Price: $28.18
Quantity:

TDSK300000 Conductivity Standard Solution, 300,000uS (Qt) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Standard Solution, 300,000uS (Gal) - TDSK300000/G
View Product Details >

Sensorex Conductivity Standard Solution, 300,000uS (Gal) - TDSK300000/G




Item #SEN-TDSK300000-G
BrandSensorex
Price: $59.51
Quantity:

TDSK300000/G Conductivity Standard Solution, 300,000uS (Gal) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Standard Solution, 300,000uS (Pt) - TDSK300000/P
View Product Details >

Sensorex Conductivity Standard Solution, 300,000uS (Pt) - TDSK300000/P




Item #SEN-TDSK300000-P
BrandSensorex
Price: $15.81
Quantity:

TDSK300000/P Conductivity Standard Solution, 300,000uS (Pt) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Standard Solution, 340000uS (Gal) - TDSK340000/G
View Product Details >

Sensorex Conductivity Standard Solution, 340000uS (Gal) - TDSK340000/G




Item #SEN-TDSK340000-G
BrandSensorex
Price: $59.51
Quantity:

TDSK340000/G Conductivity Standard Solution, 340000uS (Gal) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Standard Solution, 58,700uS (Qt) - TDSK58700
View Product Details >

Sensorex Conductivity Standard Solution, 58,700uS (Qt) - TDSK58700




Item #SEN-TDSK58700
BrandSensorex
Price: $28.18
Quantity:

TDSK58700 Conductivity Standard Solution, 58,700uS (Qt) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Standard Solution, 58,700uS (Gal) - TDSK58700/G
View Product Details >

Sensorex Conductivity Standard Solution, 58,700uS (Gal) - TDSK58700/G




Item #SEN-TDSK58700-G
BrandSensorex
Price: $59.51
Quantity:

TDSK58700/G Conductivity Standard Solution, 58,700uS (Gal) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 340.2ppm/700uS, 1Qt - TDSK700
View Product Details >

Sensorex Conductivity Solution, 340.2ppm/700uS, 1Qt - TDSK700




Item #SEN-TDSK700
BrandSensorex
Price: $28.18
Quantity:

TDSK700 Conductivity Solution, 340.2ppm/700uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 3740ppm/7000uS,1Qt - TDSK7000
View Product Details >

Sensorex Conductivity Solution, 3740ppm/7000uS,1Qt - TDSK7000




Item #SEN-TDSK7000
BrandSensorex
Price: $28.18
Quantity:

TDSK7000 Conductivity Solution, 3740ppm/7000uS,1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Potassium Chloride TDS Solution, 80000uS/cm (Pt) - TDSK80000/P
View Product Details >

Sensorex Potassium Chloride TDS Solution, 80000uS/cm (Pt) - TDSK80000/P




Item #SEN-TDSK80000-P
BrandSensorex
Price: $15.81
Quantity:

TDSK80000/P Potassium Chloride TDS Solution, 80000uS/cm (Pt) by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 84uS KCl, 1Qt. - TDSK84
View Product Details >

Sensorex Conductivity Solution, 84uS KCl, 1Qt. - TDSK84




Item #SEN-TDSK84
BrandSensorex
Price: $27.89
Quantity:

TDSK84 Conductivity Solution, 84uS KCl, 1Qt. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 497.7ppm/1000uS, 1Qt - TDSNA1
View Product Details >

Sensorex Conductivity Solution, 497.7ppm/1000uS, 1Qt - TDSNA1




Item #SEN-TDSNA1
BrandSensorex
Price: $28.18
Quantity:

TDSNA1 Conductivity Solution, 497.7ppm/1000uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 1000ppm/497.7uS, 1 Gal. - TDSNA1/G
View Product Details >

Sensorex Conductivity Solution, 1000ppm/497.7uS, 1 Gal. - TDSNA1/G




Item #SEN-TDSNA1-G
BrandSensorex
Price: $59.51
Quantity:

TDSNA1/G Conductivity Solution, 1000ppm/497.7uS, 1 Gal. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 7501ppm/13,400uS, 1Qt - TDSNA13.4
View Product Details >

Sensorex Conductivity Solution, 7501ppm/13,400uS, 1Qt - TDSNA13.4




Item #SEN-TDSNA13-4
BrandSensorex
Price: $28.18
Quantity:

TDSNA13.4 Conductivity Solution, 7501ppm/13,400uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex Conductivity Solution, 7864.7ppm/14000uS, 1Qt - TDSNA14
View Product Details >

Sensorex Conductivity Solution, 7864.7ppm/14000uS, 1Qt - TDSNA14




Item #SEN-TDSNA14
BrandSensorex
Price: $28.18
Quantity:

TDSNA14 Conductivity Solution, 7864.7ppm/14000uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

Sensorex 1" Sanitary Flange Cap for UVT-LED-PW - UVT0025
View Product Details >

Sensorex 1" Sanitary Flange Cap for UVT-LED-PW - UVT0025




Item #SEN-UVT0025
BrandSensorex
Price: $41.34
Quantity:

1" Sanitary Flange Cap for UVT-LED-PW


Sensorex Install Kit, Add Redundant Sensor to Kit -005, UVT-LED-SW - UVT-SW-006
View Product Details >

Sensorex Install Kit, Add Redundant Sensor to Kit -005, UVT-LED-SW - UVT-SW-006




Item #SEN-UVT-SW-006
BrandSensorex
Price: $513.48
Quantity:

Install Kit, Add Redundant Sensor to Kit -005, UVT-LED-SW


Sensorex Process Graphite Contacting Conductivity Sensor - CS300
View Product Details >

Sensorex Process Graphite Contacting Conductivity Sensor - CS300




Item #SEN-CS300
BrandSensorex
Price: $289.23
Quantity:

CS300 Process Graphite Contacting Conductivity Sensor by Sensorex

Sensorex's CS300 Process Graphite Contacting Conductivity Sensor is designed for light industrial process applications (cooling towers).

  • Use with an S855 cable assembly for quick disconnect helping reduce maintenance time in conventional conductivity applications using transmitters.
  • Use with the EM802 electronics module and the S856 cable to turn the CS300 into a smart sensor for use directly with SCADA systems.
Sensorex Process Graphite Contacting Conductivity Sensor, 0.1, PT1000, No Cable - CS300-B-1-N-N-A
View Product Details >

Sensorex Process Graphite Contacting Conductivity Sensor, 0.1, PT1000, No Cable - CS300-B-1-N-N-A




Item #SEN-CS300-B-1-N-N-A
BrandSensorex
Price: $289.23
Quantity:

CS300-B-1-N-N-A Process Graphite Contacting Conductivity Sensor, 0.1, PT1000, No Cable by Sensorex

Sensorex's CS300 Process Graphite Contacting Conductivity Sensor is designed for light industrial process applications (cooling towers).

  • Use with an S855 cable assembly for quick disconnect helping reduce maintenance time in conventional conductivity applications using transmitters.
  • Use with the EM802 electronics module and the S856 cable to turn the CS300 into a smart sensor for use directly with SCADA systems.
Sensorex Process Graphite Contacting Conductivity Sensor, 0.1, 10K, No Cable - CS300-B-3-N-N-A
View Product Details >

Sensorex Process Graphite Contacting Conductivity Sensor, 0.1, 10K, No Cable - CS300-B-3-N-N-A




Item #SEN-CS300-B-3-N-N-A
BrandSensorex
Price: $289.23
Quantity:

CS300-B-3-N-N-A Process Graphite Contacting Conductivity Sensor, 0.1, 10K, No Cable by Sensorex

Sensorex's CS300 Process Graphite Contacting Conductivity Sensor is designed for light industrial process applications (cooling towers).

  • Use with an S855 cable assembly for quick disconnect helping reduce maintenance time in conventional conductivity applications using transmitters.
  • Use with the EM802 electronics module and the S856 cable to turn the CS300 into a smart sensor for use directly with SCADA systems.
Sensorex Process Graphite Contacting Conductivity Sensor, K=1, PT1000, No Cable - CS300-C-1-N-N-A
View Product Details >

Sensorex Process Graphite Contacting Conductivity Sensor, K=1, PT1000, No Cable - CS300-C-1-N-N-A




Item #SEN-CS300-C-1-N-N-A
BrandSensorex
Price: $289.23
Quantity:

CS300-C-1-N-N-A Process Graphite Contacting Conductivity Sensor, K=1, PT1000, No Cable by Sensorex

Sensorex's CS300 Process Graphite Contacting Conductivity Sensor is designed for light industrial process applications (cooling towers).

  • Use with an S855 cable assembly for quick disconnect helping reduce maintenance time in conventional conductivity applications using transmitters.
  • Use with the EM802 electronics module and the S856 cable to turn the CS300 into a smart sensor for use directly with SCADA systems.
Sensorex Process Graphite Contacting Conductivity Sensor, 1.0, 10K, No Cable - CS300-C-3-N-N-A
View Product Details >

Sensorex Process Graphite Contacting Conductivity Sensor, 1.0, 10K, No Cable - CS300-C-3-N-N-A




Item #SEN-CS300-C-3-N-N-A
BrandSensorex
Price: $332.35
Quantity:

CS300-C-3-N-N-A Process Graphite Contacting Conductivity Sensor, 1.0, 10K, No Cable by Sensorex

Sensorex's CS300 Process Graphite Contacting Conductivity Sensor is designed for light industrial process applications (cooling towers).

  • Use with an S855 cable assembly for quick disconnect helping reduce maintenance time in conventional conductivity applications using transmitters.
  • Use with the EM802 electronics module and the S856 cable to turn the CS300 into a smart sensor for use directly with SCADA systems.
Sensorex Kit, CS8000TC-K=1/P1K + S855/10/TL/TL + FC875/T - CS8300TC-K=1/P1K/10/TL/TL
View Product Details >

Sensorex Kit, CS8000TC-K=1/P1K + S855/10/TL/TL + FC875/T - CS8300TC-K=1/P1K/10/TL/TL




Item #SEN-CS8300TC-K-1-P1K-10-TL-TL
BrandSensorex
Price: $491.05
Quantity:

Kit, CS8000TC-K=1/P1K + S855/10/TL/TL + FC875/T


Sensorex Kit, CS8000TC-K=1/P1K + S855/20/TL/TL + FC875/T - CS8300TC-K=1/P1K/20/TL/TL
View Product Details >

Sensorex Kit, CS8000TC-K=1/P1K + S855/20/TL/TL + FC875/T - CS8300TC-K=1/P1K/20/TL/TL




Item #SEN-CS8300TC-K-1-P1K-20-TL-TL
BrandSensorex
Price: $519.80
Quantity:

Kit, CS8000TC-K=1/P1K + S855/20/TL/TL + FC875/T


Sensorex Kit, 1 each CS8000TC-K=1/P1k + 1 each S856/20/TL/TL + 1 each EM802-EC-MB2-k=1 + 1 each FC875 + TCS30 - CS8400
View Product Details >

Sensorex Kit, 1 each CS8000TC-K=1/P1k + 1 each S856/20/TL/TL + 1 each EM802-EC-MB2-k=1 + 1 each FC875 + TCS30 - CS8400




Item #SEN-CS8400
BrandSensorex
Price: $933.51
Quantity:

Kit, 1 each CS8000TC-K=1/P1k + 1 each S856/20/TL/TL + 1 each EM802-EC-MB2-k=1 + 1 each FC875 + TCS30


Sensorex Electronics module for CS300 series conductivity sensors, 4-20mA output, K=0.1 - EM805-EC/MA/K=0.1
View Product Details >

Sensorex Electronics module for CS300 series conductivity sensors, 4-20mA output, K=0.1 - EM805-EC/MA/K=0.1




Item #SEN-EM805-EC-MA-K-0-1
BrandSensorex
Price: $405.38
Quantity:

Electronics module for CS300 series conductivity sensors, 4-20mA output, K=0.1


Sensorex Electronics module for CS300 series conductivity sensors, 4-20mA output, K=1.0 - EM805-EC/MA/K=1.0
View Product Details >

Sensorex Electronics module for CS300 series conductivity sensors, 4-20mA output, K=1.0 - EM805-EC/MA/K=1.0




Item #SEN-EM805-EC-MA-K-1-0
BrandSensorex
Price: $405.38
Quantity:

Electronics module for CS300 series conductivity sensors, 4-20mA output, K=1.0


Sensorex Electronics module for CS300 series conductivity sensors, 485 Modbus output, K=0.1 - EM805-EC/MB/K=0.1
View Product Details >

Sensorex Electronics module for CS300 series conductivity sensors, 485 Modbus output, K=0.1 - EM805-EC/MB/K=0.1




Item #SEN-EM805-EC-MB-K-0-1
BrandSensorex
Price: $405.38
Quantity:

Electronics module for CS300 series conductivity sensors, 485 Modbus output, K=0.1


Sensorex Electronics module for CS300 series conductivity sensors, 485 Modbus output, K=1.0 - EM805-EC/MB/K=1.0
View Product Details >

Sensorex Electronics module for CS300 series conductivity sensors, 485 Modbus output, K=1.0 - EM805-EC/MB/K=1.0




Item #SEN-EM805-EC-MB-K-1-0
BrandSensorex
Price: $405.38
Quantity:

Electronics module for CS300 series conductivity sensors, 485 Modbus output, K=1.0


Sensorex Electronics module for S8000 series ORP sensors, 4-20mA output - EM805-ORP/MA
View Product Details >

Sensorex Electronics module for S8000 series ORP sensors, 4-20mA output - EM805-ORP/MA




Item #SEN-EM805-ORP-MA
BrandSensorex
Price: $405.38
Quantity:

Electronics module for S8000 series ORP sensors, 4-20mA output


Sensorex Electronics module for S8000 series ORP sensors, 485 Modbus output - EM805-ORP/MB
View Product Details >

Sensorex Electronics module for S8000 series ORP sensors, 485 Modbus output - EM805-ORP/MB




Item #SEN-EM805-ORP-MB
BrandSensorex
Price: $405.38
Quantity:

Electronics module for S8000 series ORP sensors, 485 Modbus output


Sensorex Electronics module for S8000 series pH sensors, 4-20mA output - EM805-PH/MA
View Product Details >

Sensorex Electronics module for S8000 series pH sensors, 4-20mA output - EM805-PH/MA




Item #SEN-EM805-PH-MA
BrandSensorex
Price: $405.38
Quantity:

Electronics module for S8000 series pH sensors, 4-20mA output


Sensorex Electronics module for S8000 series pH sensors, 485 Modbus output - EM805-PH/MB
View Product Details >

Sensorex Electronics module for S8000 series pH sensors, 485 Modbus output - EM805-PH/MB




Item #SEN-EM805-PH-MB
BrandSensorex
Price: $405.38
Quantity:

Electronics module for S8000 series pH sensors, 485 Modbus output


Sensorex Kit, S8000CD + EA899TC/P1K + FC875/T + S855/10/BNC/TL - S8300TC/10/BNC/TL
View Product Details >

Sensorex Kit, S8000CD + EA899TC/P1K + FC875/T + S855/10/BNC/TL - S8300TC/10/BNC/TL




Item #SEN-S8300TC-10-BNC-TL
BrandSensorex
Price: $686.84
Quantity:

Kit, S8000CD + EA899TC/P1K + FC875/T + S855/10/BNC/TL


Sensorex Kit, S8000CD + EA899TC/P1K + FC875/T + S855/10/TL/TL - S8300TC/10/TL/TL
View Product Details >

Sensorex Kit, S8000CD + EA899TC/P1K + FC875/T + S855/10/TL/TL - S8300TC/10/TL/TL




Item #SEN-S8300TC-10-TL-TL
BrandSensorex
Price: $686.84
Quantity:

Kit, S8000CD + EA899TC/P1K + FC875/T + S855/10/TL/TL


Sensorex Kit, 1 each S8000CD+EA899TC/P1k+S856/10/TL+EM803-pH - S8400
View Product Details >

Sensorex Kit, 1 each S8000CD+EA899TC/P1k+S856/10/TL+EM803-pH - S8400




Item #SEN-S8400
BrandSensorex
Price: $1,029.83
Quantity:

Kit, 1 each S8000CD+EA899TC/P1k+S856/10/TL+EM803-pH


Sensorex Kit, 1 each S8000CD+EA899TC/P1k+S856/20/TL+EM803-pH - S8500
View Product Details >

Sensorex Kit, 1 each S8000CD+EA899TC/P1k+S856/20/TL+EM803-pH - S8500




Item #SEN-S8500
BrandSensorex
Price: $1,058.58
Quantity:

Kit, 1 each S8000CD+EA899TC/P1k+S856/20/TL+EM803-pH


Sensorex Kit, 1 each S8000CD+EA899TC/P1k+S856/10/TL+EM803-pH+FC875/T - S8600
View Product Details >

Sensorex Kit, 1 each S8000CD+EA899TC/P1k+S856/10/TL+EM803-pH+FC875/T - S8600




Item #SEN-S8600
BrandSensorex
Price: $1,100.55
Quantity:

Kit, 1 each S8000CD+EA899TC/P1k+S856/10/TL+EM803-pH+FC875/T


Sensorex Kit, 1 each S8000CD+EA899TC/P1k+S856/20/TL+EM803-pH+FC875/T - S8700
View Product Details >

Sensorex Kit, 1 each S8000CD+EA899TC/P1k+S856/20/TL+EM803-pH+FC875/T - S8700




Item #SEN-S8700
BrandSensorex
Price: $1,129.30
Quantity:

Kit, 1 each S8000CD+EA899TC/P1k+S856/20/TL+EM803-pH+FC875/T


Sensorex Kit, 1 each TCSMA + TCS3020-MB2/R1/P1K/20/TL - TCS3400
View Product Details >

Sensorex Kit, 1 each TCSMA + TCS3020-MB2/R1/P1K/20/TL - TCS3400




Item #SEN-TCS3400
BrandSensorex
Price: $2,102.20
Quantity:

Kit, 1 each TCSMA + TCS3020-MB2/R1/P1K/20/TL


Sensorex Kit, 1 each TCSTX + TCS3020-MB2/R2/P1K/20/TL - TCS3500
View Product Details >

Sensorex Kit, 1 each TCSTX + TCS3020-MB2/R2/P1K/20/TL - TCS3500




Item #SEN-TCS3500
BrandSensorex
Price: $2,598.43
Quantity:

Kit, 1 each TCSTX + TCS3020-MB2/R2/P1K/20/TL


Sensorex Kit, TCS3020/P1K/MB2/R1/20/TL + FC95C - TCS3600
View Product Details >

Sensorex Kit, TCS3020/P1K/MB2/R1/20/TL + FC95C - TCS3600




Item #SEN-TCS3600
BrandSensorex
Price: $1,221.88
Quantity:

Kit, TCS3020/P1K/MB2/R1/20/TL + FC95C


Sensorex Kit, TCS3020/P1K/MB2/R1/20/TL + FC95C - TCS3700
View Product Details >

Sensorex Kit, TCS3020/P1K/MB2/R1/20/TL + FC95C - TCS3700




Item #SEN-TCS3700
BrandSensorex
Price: $1,221.88
Quantity:

Kit, TCS3020/P1K/MB2/R1/20/TL + FC95C


Sensorex DO Electrolyte for DO6400 Series, 1 pt/500ml - DO6002
View Product Details >

Sensorex DO Electrolyte for DO6400 Series, 1 pt/500ml - DO6002




Item #SEN-DO6002
BrandSensorex
Price: $23.29
Quantity:

DO Electrolyte for DO6400 Series, 1 pt/500ml


Sensorex DO Membrane Pack HDPE, 5/Pk for DO6000 Series - DO6005/H
View Product Details >

Sensorex DO Membrane Pack HDPE, 5/Pk for DO6000 Series - DO6005/H




Item #SEN-DO6005-H
BrandSensorex
Price: $17.83
Quantity:

DO Membrane Pack HDPE, 5/Pk for DO6000 Series


Sensorex Replacement Cap for titanium optical dissolved oxygen probe - ODOA90
View Product Details >

Sensorex Replacement Cap for titanium optical dissolved oxygen probe - ODOA90




Item #SEN-ODOA90
BrandSensorex
Price: $364.55
Quantity:

Replacement Cap for titanium optical dissolved oxygen probe


Sensorex Conductivity Sensor, K=0.1, P1K, 10ft, TL/TL - CS150TC-K=0.1/P1K/10/TL/TL
View Product Details >

Sensorex Conductivity Sensor, K=0.1, P1K, 10ft, TL/TL - CS150TC-K=0.1/P1K/10/TL/TL




Item #SEN-CS150TC-K-0-1-P1K-10-TL-TL
BrandSensorex
Price: $213.90
Quantity:

Conductivity Sensor, K=0.1, P1K, 10ft, TL/TL


Sensorex Conductuctivity Sensor, K=1, 6 Inch, TL (No TC) - CS675-K=1
View Product Details >

Sensorex Conductuctivity Sensor, K=1, 6 Inch, TL (No TC) - CS675-K=1




Item #SEN-CS675-K-1
BrandSensorex
Price: $434.41
Quantity:

Conductuctivity Sensor, K=1, 6 Inch, TL (No TC)


Sensorex Conduct Sensor, K=1, P1K, 10ft, TL - CS675TC-K=1/P1K/10/TL
View Product Details >

Sensorex Conduct Sensor, K=1, P1K, 10ft, TL - CS675TC-K=1/P1K/10/TL




Item #SEN-CS675TC-K-1-P1K-10-TL
BrandSensorex
Price: $530.73
Quantity:

Conduct Sensor, K=1, P1K, 10ft, TL


Sensorex Conductivity Sensor, ATC, K=0.1, P1K, 6 Inch, TL - CS676HTTC-K=0.1/P1K
View Product Details >

Sensorex Conductivity Sensor, ATC, K=0.1, P1K, 6 Inch, TL - CS676HTTC-K=0.1/P1K




Item #SEN-CS676HTTC-K-0-1-P1K
BrandSensorex
Price: $537.63
Quantity:

Conductivity Sensor, ATC, K=0.1, P1K, 6 Inch, TL


Sensorex Conductivity Sensor, ATC, K=1, P1K, 6 Inch, TL - CS676HTTC-K=1/P1K
View Product Details >

Sensorex Conductivity Sensor, ATC, K=1, P1K, 6 Inch, TL - CS676HTTC-K=1/P1K




Item #SEN-CS676HTTC-K-1-P1K
BrandSensorex
Price: $537.63
Quantity:

Conductivity Sensor, ATC, K=1, P1K, 6 Inch, TL


Sensorex Conductivity Sensor, K=1, 6 Inch, TL, TC= - CS676TC-K=1
View Product Details >

Sensorex Conductivity Sensor, K=1, 6 Inch, TL, TC= - CS676TC-K=1




Item #SEN-CS676TC-K-1
BrandSensorex
Price: $506.58
Quantity:

Conductivity Sensor, K=1, 6 Inch, TL, TC=


Sensorex Cap/Cable with Waterproof for EA & EM Parts - - S853W
View Product Details >

Sensorex Cap/Cable with Waterproof for EA & EM Parts - - S853W




Item #SEN-S853W
BrandSensorex
Price: $125.64
Quantity:

Cap/Cable with Waterproof for EA & EM Parts -


Sensorex TX105 no Sensorex logo or part number "pH/mV Transmitter" - TX105-P
View Product Details >

Sensorex TX105 no Sensorex logo or part number "pH/mV Transmitter" - TX105-P




Item #SEN-TX105-P
BrandSensorex
Price: $1,486.50
Quantity:

TX105 no Sensorex logo or part number "pH/mV Transmitter"


Sensorex Adapter, Belling Lee - BNR - A060
View Product Details >

Sensorex Adapter, Belling Lee - BNR - A060




Item #SEN-A060
BrandSensorex
Price: $30.76
Quantity:

Adapter, Belling Lee - BNR


Sensorex Adapter, BNR/DIN-M - A070
View Product Details >

Sensorex Adapter, BNR/DIN-M - A070




Item #SEN-A070
BrandSensorex
Price: $65.26
Quantity:

Adapter, BNR/DIN-M


Sensorex iPhone 5 to PH-1 Adpater - A090
View Product Details >

Sensorex iPhone 5 to PH-1 Adpater - A090




Item #SEN-A090
BrandSensorex
Price: $70.15
Quantity:

iPhone 5 to PH-1 Adpater


Sensorex Polypro Adapter for TCS1000 - A1001
View Product Details >

Sensorex Polypro Adapter for TCS1000 - A1001




Item #SEN-A1001
BrandSensorex
Price: $94.30
Quantity:

Polypro Adapter for TCS1000


Sensorex 316SS Adapter for TCS1000 - A1002
View Product Details >

Sensorex 316SS Adapter for TCS1000 - A1002




Item #SEN-A1002
BrandSensorex
Price: $265.94
Quantity:

316SS Adapter for TCS1000


Sensorex pHASE, Bulb Guard (2 Per Set), 170279A - BG279
View Product Details >

Sensorex pHASE, Bulb Guard (2 Per Set), 170279A - BG279




Item #SEN-BG279
BrandSensorex
Price: $10.35
Quantity:

pHASE, Bulb Guard (2 Per Set), 170279A


Sensorex DO Probe Guard, 171335, 1 each - BG456
View Product Details >

Sensorex DO Probe Guard, 171335, 1 each - BG456




Item #SEN-BG456
BrandSensorex
Price: $30.48
Quantity:

DO Probe Guard, 171335, 1 each


Sensorex Crimp style BNC connector with All Parts - BNC-KIT
View Product Details >

Sensorex Crimp style BNC connector with All Parts - BNC-KIT




Item #SEN-BNC-KIT
BrandSensorex
Price: $10.35
Quantity:

Crimp style BNC connector with All Parts


Sensorex BNR Kit of 10 each 270111 - BNR-KIT
View Product Details >

Sensorex BNR Kit of 10 each 270111 - BNR-KIT




Item #SEN-BNR-KIT
BrandSensorex
Price: $66.41
Quantity:

BNR Kit of 10 each 270111


Sensorex Coaxial Cable, 270134 - CB134
View Product Details >

Sensorex Coaxial Cable, 270134 - CB134




Item #SEN-CB134
BrandSensorex
Price: $1.73
Quantity:

Coaxial Cable, 270134


Sensorex Cable, Coax, Waterproof,170256 - CB256
View Product Details >

Sensorex Cable, Coax, Waterproof,170256 - CB256




Item #SEN-CB256
BrandSensorex
Price: $2.59
Quantity:

Cable, Coax, Waterproof,170256


Sensorex Cold Weather Packaging - COLD WEATHER PACKAGING
View Product Details >

Sensorex Cold Weather Packaging - COLD WEATHER PACKAGING




Item #SEN-COLD-WEATHER-PACKAGING
BrandSensorex
Price: $11.79
Quantity:

Cold Weather Packaging


Sensorex Conductivity Sensor, K=1, P1K, 10ft, TL/TL - CS150TC-K=1/P1K/10/TL/TL
View Product Details >

Sensorex Conductivity Sensor, K=1, P1K, 10ft, TL/TL - CS150TC-K=1/P1K/10/TL/TL




Item #SEN-CS150TC-K-1-P1K-10-TL-TL
BrandSensorex
Price: $213.90
Quantity:

Conductivity Sensor, K=1, P1K, 10ft, TL/TL


Sensorex CS200TC-K=10, 10K, 1M, 8 PIN DIN for CM1000 Lab Meter - CS200TC-K=10/10K/CM1000
View Product Details >

Sensorex CS200TC-K=10, 10K, 1M, 8 PIN DIN for CM1000 Lab Meter - CS200TC-K=10/10K/CM1000




Item #SEN-CS200TC-K-10-10K-CM1000
BrandSensorex
Price: $295.84
Quantity:

CS200TC-K=10, 10K, 1M, 8 PIN DIN for CM1000 Lab Meter


Sensorex Conductivity Sensor - K=1/P1K10ft/TL/TL, Modbus Output (Range 0-10,000uS) - CS272CDTC-MB/K=1/P1K/10/TL/TL
View Product Details >

Sensorex Conductivity Sensor - K=1/P1K10ft/TL/TL, Modbus Output (Range 0-10,000uS) - CS272CDTC-MB/K=1/P1K/10/TL/TL




Item #SEN-CS272CDTC-MB-K-1-P1K-10-TL-TL
BrandSensorex
Price: $677.93
Quantity:

Conductivity Sensor - K=1/P1K10ft/TL/TL, Modbus Output (Range 0-10,000uS)


Sensorex Conductivity Sensor, K=.01,15 ft, TC= - CS615TC-K=.01
View Product Details >

Sensorex Conductivity Sensor, K=.01,15 ft, TC= - CS615TC-K=.01




Item #SEN-CS615TC-K--01
BrandSensorex
Price: $613.24
Quantity:

Conductivity Sensor, K=.01,15 ft, TC=


Sensorex Conductivity Sensor, K=0.1, FT=, TC= - CS615TC-K=0.1
View Product Details >

Sensorex Conductivity Sensor, K=0.1, FT=, TC= - CS615TC-K=0.1




Item #SEN-CS615TC-K-0-1
BrandSensorex
Price: $613.24
Quantity:

Conductivity Sensor, K=0.1, FT=, TC=


Sensorex Conductivity Sensor, K=0.1, 10ft/TL, TC= - CS620TC-K=0.1
View Product Details >

Sensorex Conductivity Sensor, K=0.1, 10ft/TL, TC= - CS620TC-K=0.1




Item #SEN-CS620TC-K-0-1
BrandSensorex
Price: $685.40
Quantity:

Conductivity Sensor, K=0.1, 10ft/TL, TC=


Sensorex Conduct Sensor, K=1, 6 Inch, TL - Use CS675 - CS675HT-K=1
View Product Details >

Sensorex Conduct Sensor, K=1, 6 Inch, TL - Use CS675 - CS675HT-K=1




Item #SEN-CS675HT-K-1
BrandSensorex
Price: $466.04
Quantity:

Conduct Sensor, K=1, 6 Inch, TL - Use CS675


Sensorex Conduct Sensor, ATC, K=0.1, P1K, 6 Inch, TL - Use CS675 - CS675HTTC-K=0.1/P1K
View Product Details >

Sensorex Conduct Sensor, ATC, K=0.1, P1K, 6 Inch, TL - Use CS675 - CS675HTTC-K=0.1/P1K




Item #SEN-CS675HTTC-K-0-1-P1K
BrandSensorex
Price: $503.41
Quantity:

Conduct Sensor, ATC, K=0.1, P1K, 6 Inch, TL - Use CS675


Sensorex De-Ionized Water, 1 Gal - DI800
View Product Details >

Sensorex De-Ionized Water, 1 Gal - DI800




Item #SEN-DI800
BrandSensorex
Price: $15.81
Quantity:

De-Ionized Water, 1 Gal


Sensorex Detachable Lead, BNC, 4ft - DINEL-TL/4
View Product Details >

Sensorex Detachable Lead, BNC, 4ft - DINEL-TL/4




Item #SEN-DINEL-TL-4
BrandSensorex
Price: $69.58
Quantity:

Detachable Lead, BNC, 4ft


Sensorex Datalogger for UVT-LED-SW - DL100
View Product Details >

Sensorex Datalogger for UVT-LED-SW - DL100




Item #SEN-DL100
BrandSensorex
Price: $299.29
Quantity:

Datalogger for UVT-LED-SW


Sensorex DO Sensor, 12mm Hand Held, TL/30 Inch with H2M Membrane - DO1200/H2M
View Product Details >

Sensorex DO Sensor, 12mm Hand Held, TL/30 Inch with H2M Membrane - DO1200/H2M




Item #SEN-DO1200-H2M
BrandSensorex
Price: $327.75
Quantity:

DO Sensor, 12mm Hand Held, TL/30 Inch with H2M Membrane


Sensorex Replacement Cap Only for DO1200/H2M - DO1200-CAP/H2M
View Product Details >

Sensorex Replacement Cap Only for DO1200/H2M - DO1200-CAP/H2M




Item #SEN-DO1200-CAP-H2M
BrandSensorex
Price: $70.15
Quantity:

Replacement Cap Only for DO1200/H2M


Sensorex Replacement Membrane Cartridge,Electrolyte& Inject - DO1200-KIT/H2M
View Product Details >

Sensorex Replacement Membrane Cartridge,Electrolyte& Inject - DO1200-KIT/H2M




Item #SEN-DO1200-KIT-H2M
BrandSensorex
Price: $104.08
Quantity:

Replacement Membrane Cartridge,Electrolyte& Inject


Sensorex DO Probe ATC, 12mm, TL/30 inch, BNC - DO1200TC/H2M
View Product Details >

Sensorex DO Probe ATC, 12mm, TL/30 inch, BNC - DO1200TC/H2M




Item #SEN-DO1200TC-H2M
BrandSensorex
Price: $419.75
Quantity:

DO Probe ATC, 12mm, TL/30 inch, BNC


Sensorex 4-20mA DO Transmitter, 24VDC - DO500
View Product Details >

Sensorex 4-20mA DO Transmitter, 24VDC - DO500




Item #SEN-DO500
BrandSensorex
Price: $921.15
Quantity:

4-20mA DO Transmitter, 24VDC


Sensorex DO Membrane Replacement Tool - DO6001
View Product Details >

Sensorex DO Membrane Replacement Tool - DO6001




Item #SEN-DO6001
BrandSensorex
Price: $39.10
Quantity:

DO Membrane Replacement Tool


Sensorex DO Membrane Pack HDPE-2mil, 5/Pkfor DO6000,6200 - DO6005/H2
View Product Details >

Sensorex DO Membrane Pack HDPE-2mil, 5/Pkfor DO6000,6200 - DO6005/H2




Item #SEN-DO6005-H2
BrandSensorex
Price: $23.29
Quantity:

DO Membrane Pack HDPE-2mil, 5/Pkfor DO6000,6200


Sensorex DO Membrane Pack, PTFE, 5/Pk for DO6000,6200 for Eutech Only - DO6005/T
View Product Details >

Sensorex DO Membrane Pack, PTFE, 5/Pk for DO6000,6200 for Eutech Only - DO6005/T




Item #SEN-DO6005-T
BrandSensorex
Price: $23.29
Quantity:

DO Membrane Pack, PTFE, 5/Pk for DO6000,6200 for Eutech Only


Sensorex DO Membrane Pack,HDPE,25/Pk for DO6000,6200 - DO6025/H
View Product Details >

Sensorex DO Membrane Pack,HDPE,25/Pk for DO6000,6200 - DO6025/H




Item #SEN-DO6025-H
BrandSensorex
Price: $58.36
Quantity:

DO Membrane Pack,HDPE,25/Pk for DO6000,6200


Sensorex DO Membrane Pack,HDPE-2 mil,25/Pk for DO6000,6200 - DO6025/H2
View Product Details >

Sensorex DO Membrane Pack,HDPE-2 mil,25/Pk for DO6000,6200 - DO6025/H2




Item #SEN-DO6025-H2
BrandSensorex
Price: $96.31
Quantity:

DO Membrane Pack,HDPE-2 mil,25/Pk for DO6000,6200


Sensorex DO Membrane Pack, PTFE, 25/Pk for DO6000,6200 - DO6025/T
View Product Details >

Sensorex DO Membrane Pack, PTFE, 25/Pk for DO6000,6200 - DO6025/T




Item #SEN-DO6025-T
BrandSensorex
Price: $74.18
Quantity:

DO Membrane Pack, PTFE, 25/Pk for DO6000,6200


Sensorex DO Sensor, 0-100%, Modbus 485 output, Range 0-150% - DO6441/T-MB/10/TL/TL
View Product Details >

Sensorex DO Sensor, 0-100%, Modbus 485 output, Range 0-150% - DO6441/T-MB/10/TL/TL




Item #SEN-DO6441-T-MB-10-TL-TL
BrandSensorex
Price: $1,059.73
Quantity:

DO Sensor, 0-100%, Modbus 485 output, Range 0-150%


Sensorex DO Sensor, 0-100%, Modbus 485 output, Range 0-300% - DO6442/T/MB/10/TL/TL
View Product Details >

Sensorex DO Sensor, 0-100%, Modbus 485 output, Range 0-300% - DO6442/T/MB/10/TL/TL




Item #SEN-DO6442-T-MB-10-TL-TL
BrandSensorex
Price: $1,059.73
Quantity:

DO Sensor, 0-100%, Modbus 485 output, Range 0-300%


Sensorex DO Sensor, Molded, HDPE Membrane,4-20mA, 10ft, TL - DO7441/H
View Product Details >

Sensorex DO Sensor, Molded, HDPE Membrane,4-20mA, 10ft, TL - DO7441/H




Item #SEN-DO7441-H
BrandSensorex
Price: $1,055.99
Quantity:

DO Sensor, Molded, HDPE Membrane,4-20mA, 10ft, TL


Sensorex DO Sensor, PTFE, 10ft/TL with Accessories - DO7441/T
View Product Details >

Sensorex DO Sensor, PTFE, 10ft/TL with Accessories - DO7441/T




Item #SEN-DO7441-T
BrandSensorex
Price: $1,055.99
Quantity:

DO Sensor, PTFE, 10ft/TL with Accessories


Sensorex DO Sensor Lead Anode, 4-20mA output (0-200% range) - DO7442/T
View Product Details >

Sensorex DO Sensor Lead Anode, 4-20mA output (0-200% range) - DO7442/T




Item #SEN-DO7442-T
BrandSensorex
Price: $1,055.99
Quantity:

DO Sensor Lead Anode, 4-20mA output (0-200% range)


Sensorex DO Maintenance Kit for DO6000, HDPE Membranes,Electrolyte,Tool - DOKIT/H
View Product Details >

Sensorex DO Maintenance Kit for DO6000, HDPE Membranes,Electrolyte,Tool - DOKIT/H




Item #SEN-DOKIT-H
BrandSensorex
Price: $74.18
Quantity:

DO Maintenance Kit for DO6000, HDPE Membranes,Electrolyte,Tool


Sensorex DO Maint Kit for 971679, HDPE-2mil Membranes,Electrolyte,Tool - DOKIT/H2
View Product Details >

Sensorex DO Maint Kit for 971679, HDPE-2mil Membranes,Electrolyte,Tool - DOKIT/H2




Item #SEN-DOKIT-H2
BrandSensorex
Price: $85.10
Quantity:

DO Maint Kit for 971679, HDPE-2mil Membranes,Electrolyte,Tool


Sensorex DO Maint Kit for DO6000, PTFE Membranes,Electrolyte,Tool - DOKIT/T
View Product Details >

Sensorex DO Maint Kit for DO6000, PTFE Membranes,Electrolyte,Tool - DOKIT/T




Item #SEN-DOKIT-T
BrandSensorex
Price: $85.10
Quantity:

DO Maint Kit for DO6000, PTFE Membranes,Electrolyte,Tool


Sensorex Special Handling Charge - DROP SHIP FEE
View Product Details >

Sensorex Special Handling Charge - DROP SHIP FEE




Item #SEN-DROP-SHIP-FEE
BrandSensorex
Price: $24.15
Quantity:

Special Handling Charge


Sensorex ATC Sensor Holder, TC=___Only - Use /PT1 or /P1K - EA897TC
View Product Details >

Sensorex ATC Sensor Holder, TC=___Only - Use /PT1 or /P1K - EA897TC




Item #SEN-EA897TC
BrandSensorex
Price: $257.31
Quantity:

ATC Sensor Holder, TC=___Only - Use /PT1 or /P1K


Sensorex ATC Sensor Holder with Titanium Ground Pin, TC=P1K - EA897TC/P1K
View Product Details >

Sensorex ATC Sensor Holder with Titanium Ground Pin, TC=P1K - EA897TC/P1K




Item #SEN-EA897TC-P1K
BrandSensorex
Price: $257.31
Quantity:

ATC Sensor Holder with Titanium Ground Pin, TC=P1K


Sensorex ATC Sensor Holder Non-Metallic, TC= - EA898TC
View Product Details >

Sensorex ATC Sensor Holder Non-Metallic, TC= - EA898TC




Item #SEN-EA898TC
BrandSensorex
Price: $230.86
Quantity:

ATC Sensor Holder Non-Metallic, TC=


Sensorex ATC Sensor Holder, TC= - EA899TC/CSTM
View Product Details >

Sensorex ATC Sensor Holder, TC= - EA899TC/CSTM




Item #SEN-EA899TC-CSTM
BrandSensorex
Price: $230.86
Quantity:

ATC Sensor Holder, TC=


Sensorex Flow Cell, P8MC8, 170326 - FC50PU
View Product Details >

Sensorex Flow Cell, P8MC8, 170326 - FC50PU




Item #SEN-FC50PU
BrandSensorex
Price: $13.05
Quantity:

Flow Cell, P8MC8, 170326


Sensorex Flow Cell, P10MC8, 170147 - FC51PU
View Product Details >

Sensorex Flow Cell, P10MC8, 170147 - FC51PU




Item #SEN-FC51PU
BrandSensorex
Price: $15.81
Quantity:

Flow Cell, P10MC8, 170147


Sensorex Flow Cell - - FC66TC/CSTM
View Product Details >

Sensorex Flow Cell - - FC66TC/CSTM




Item #SEN-FC66TC-CSTM
BrandSensorex
Price: $355.64
Quantity:

Flow Cell -


Sensorex Flow Cell - P1K, 10ft, BNC/SL - FC66TC/P1K/10/BNC/SL
View Product Details >

Sensorex Flow Cell - P1K, 10ft, BNC/SL - FC66TC/P1K/10/BNC/SL




Item #SEN-FC66TC-P1K-10-BNC-SL
BrandSensorex
Price: $355.64
Quantity:

Flow Cell - P1K, 10ft, BNC/SL


Sensorex Flow Cell - P1K, 20ft, BNC/BW - FC66TC/P1K/20/BNC/BW
View Product Details >

Sensorex Flow Cell - P1K, 20ft, BNC/BW - FC66TC/P1K/20/BNC/BW




Item #SEN-FC66TC-P1K-20-BNC-BW
BrandSensorex
Price: $384.39
Quantity:

Flow Cell - P1K, 20ft, BNC/BW


Sensorex Flow Cell - P1K, 25ft, BNC/SL - FC66TC/P1K/25/BNC/SL
View Product Details >

Sensorex Flow Cell - P1K, 25ft, BNC/SL - FC66TC/P1K/25/BNC/SL




Item #SEN-FC66TC-P1K-25-BNC-SL
BrandSensorex
Price: $398.76
Quantity:

Flow Cell - P1K, 25ft, BNC/SL


Sensorex Flow Cell - P1K, 25ft, CSC/BW - FC66TC/P1K/25/CSC/BW
View Product Details >

Sensorex Flow Cell - P1K, 25ft, CSC/BW - FC66TC/P1K/25/CSC/BW




Item #SEN-FC66TC-P1K-25-CSC-BW
BrandSensorex
Price: $398.76
Quantity:

Flow Cell - P1K, 25ft, CSC/BW


Sensorex Flow Cell - PT1, 10ft, BNC/C3 - FC66TC/PT1/10/BNC/C3
View Product Details >

Sensorex Flow Cell - PT1, 10ft, BNC/C3 - FC66TC/PT1/10/BNC/C3




Item #SEN-FC66TC-PT1-10-BNC-C3
BrandSensorex
Price: $374.04
Quantity:

Flow Cell - PT1, 10ft, BNC/C3


Sensorex Flow Cell - PT1, 20ft, BNC/BW - FC66TC/PT1/20/BNC/BW
View Product Details >

Sensorex Flow Cell - PT1, 20ft, BNC/BW - FC66TC/PT1/20/BNC/BW




Item #SEN-FC66TC-PT1-20-BNC-BW
BrandSensorex
Price: $399.91
Quantity:

Flow Cell - PT1, 20ft, BNC/BW


Sensorex Flow Cell - UNS, 20ft, BNC/BW - FC66TC/UNS/20/BNC/BW
View Product Details >

Sensorex Flow Cell - UNS, 20ft, BNC/BW - FC66TC/UNS/20/BNC/BW




Item #SEN-FC66TC-UNS-20-BNC-BW
BrandSensorex
Price: $384.39
Quantity:

Flow Cell - UNS, 20ft, BNC/BW


Sensorex Flow Cell (Custom TC) -(Price Incl 10ft - Base $179.50) - FC67TC/CSTM
View Product Details >

Sensorex Flow Cell (Custom TC) -(Price Incl 10ft - Base $179.50) - FC67TC/CSTM




Item #SEN-FC67TC-CSTM
BrandSensorex
Price: $383.24
Quantity:

Flow Cell (Custom TC) -(Price Incl 10ft - Base $179.50)


Sensorex Flow Cell - (Custom TC) - FC68TC/CSTM
View Product Details >

Sensorex Flow Cell - (Custom TC) - FC68TC/CSTM




Item #SEN-FC68TC-CSTM
BrandSensorex
Price: $406.53
Quantity:

Flow Cell - (Custom TC)


Sensorex Flow Cell - P1K, 25ft, CSC/BW - FC68TC/P1K/25/CSC/BW
View Product Details >

Sensorex Flow Cell - P1K, 25ft, CSC/BW - FC68TC/P1K/25/CSC/BW




Item #SEN-FC68TC-P1K-25-CSC-BW
BrandSensorex
Price: $449.65
Quantity:

Flow Cell - P1K, 25ft, CSC/BW


Sensorex Flow Cell, P8MC12, 170327 - FC75PU
View Product Details >

Sensorex Flow Cell, P8MC12, 170327 - FC75PU




Item #SEN-FC75PU
BrandSensorex
Price: $13.63
Quantity:

Flow Cell, P8MC12, 170327


Sensorex Free Chlorine Sensor Version 4 Refill Solution, 2ea, 30ml - FCLA-4015
View Product Details >

Sensorex Free Chlorine Sensor Version 4 Refill Solution, 2ea, 30ml - FCLA-4015




Item #SEN-FCLA-4015
BrandSensorex
Price: $54.34
Quantity:

Free Chlorine Sensor Version 4 Refill Solution, 2ea, 30ml


Sensorex Version 4, Free Chlorine Replacement Membrane Cap - FCLA-4016
View Product Details >

Sensorex Version 4, Free Chlorine Replacement Membrane Cap - FCLA-4016




Item #SEN-FCLA-4016
BrandSensorex
Price: $177.68
Quantity:

Version 4, Free Chlorine Replacement Membrane Cap


Sensorex Membrane Cap for FCL402D, 405D & 410D - FCLA-4026
View Product Details >

Sensorex Membrane Cap for FCL402D, 405D & 410D - FCLA-4026




Item #SEN-FCLA-4026
BrandSensorex
Price: $178.83
Quantity:

Membrane Cap for FCL402D, 405D & 410D


Sensorex Glass Body pH Sensor, PTFE Junction, Single Junction, 120mm x 12mm, S8 Connector - GT101
View Product Details >

Sensorex Glass Body pH Sensor, PTFE Junction, Single Junction, 120mm x 12mm, S8 Connector - GT101




Item #SEN-GT101
BrandSensorex
Price: $132.50
Quantity:

Glass Body pH Sensor, PTFE Junction, Single Junction, 120mm x 12mm, S8 Connector


Sensorex Glass Body Hi-Temp pH/ATC Sensor, DJ, VarioPin connector, PT100 Temp Comp - GT260
View Product Details >

Sensorex Glass Body Hi-Temp pH/ATC Sensor, DJ, VarioPin connector, PT100 Temp Comp - GT260




Item #SEN-GT260
BrandSensorex
Price: $272.50
Quantity:

Glass Body Hi-Temp pH/ATC Sensor, DJ, VarioPin connector, PT100 Temp Comp


Sensorex Glass Body Hi-Temp pH Sensor, KCL Reservoir, VarioPin connector, PT100 Temp Comp - GT360
View Product Details >

Sensorex Glass Body Hi-Temp pH Sensor, KCL Reservoir, VarioPin connector, PT100 Temp Comp - GT360




Item #SEN-GT360
BrandSensorex
Price: $325.00
Quantity:

Glass Body Hi-Temp pH Sensor, KCL Reservoir, VarioPin connector, PT100 Temp Comp


Sensorex pH/ORP cable, VarioPin Connector, 1 Meter, tinned leads - GTC-V/1
View Product Details >

Sensorex pH/ORP cable, VarioPin Connector, 1 Meter, tinned leads - GTC-V/1




Item #SEN-GTC-V-1
BrandSensorex
Price: $225.00
Quantity:

pH/ORP cable, VarioPin Connector, 1 Meter, tinned leads


Sensorex Heat Pack Charge - HEAT PACK
View Product Details >

Sensorex Heat Pack Charge - HEAT PACK




Item #SEN-HEAT-PACK
BrandSensorex
Price: $11.79
Quantity:

Heat Pack Charge


Sensorex Insert Tube for S675, - INSA-012TC/CSTM
View Product Details >

Sensorex Insert Tube for S675, - INSA-012TC/CSTM




Item #SEN-INSA-012TC-CSTM
BrandSensorex
Price: $508.88
Quantity:

Insert Tube for S675,


Sensorex TCS3020/P1K/20ft-modbus 485 output, 12V power, 0-100mS range - ITCS3020/MB
View Product Details >

Sensorex TCS3020/P1K/20ft-modbus 485 output, 12V power, 0-100mS range - ITCS3020/MB




Item #SEN-ITCS3020-MB
BrandSensorex
Price: $1,210.95
Quantity:

TCS3020/P1K/20ft-modbus 485 output, 12V power, 0-100mS range


Sensorex Smart Noryl Toroidal Conductivity Sensor, Modbus 24V, Low Range, 10ft Cable, TL - ITCS3020-4-C-1-CC-3-A-1
View Product Details >

Sensorex Smart Noryl Toroidal Conductivity Sensor, Modbus 24V, Low Range, 10ft Cable, TL - ITCS3020-4-C-1-CC-3-A-1




Item #SEN-ITCS3020-4-C-1-CC-3-A-1
BrandSensorex
Price: $1,155.75
Quantity:

Smart Noryl Toroidal Conductivity Sensor, Modbus 24V, Low Range, 10ft Cable, TL


Sensorex ION Transmitter with RS485 Output - IX3000RS
View Product Details >

Sensorex ION Transmitter with RS485 Output - IX3000RS




Item #SEN-IX3000RS
BrandSensorex
Price: $1,971.96
Quantity:

ION Transmitter with RS485 Output


Sensorex NIST Conductivity Certificate - NIST COND
View Product Details >

Sensorex NIST Conductivity Certificate - NIST COND




Item #SEN-NIST-COND
BrandSensorex
Price: $23.58
Quantity:

NIST Conductivity Certificate


Sensorex NIST Buffer Certificate - NIST PH
View Product Details >

Sensorex NIST Buffer Certificate - NIST PH




Item #SEN-NIST-PH
BrandSensorex
Price: $24.15
Quantity:

NIST Buffer Certificate


Sensorex NIST Buffer Certificate - NIST ZOBELL
View Product Details >

Sensorex NIST Buffer Certificate - NIST ZOBELL




Item #SEN-NIST-ZOBELL
BrandSensorex
Price: $22.71
Quantity:

NIST Buffer Certificate


Sensorex ODO8000 with Green Connector. Use with Extension Cable ODOA82 or ODOA83 - ODO8000-C
View Product Details >

Sensorex ODO8000 with Green Connector. Use with Extension Cable ODOA82 or ODOA83 - ODO8000-C




Item #SEN-ODO8000-C
BrandSensorex
Price: $1,781.06
Quantity:

ODO8000 with Green Connector. Use with Extension Cable ODOA82 or ODOA83


Sensorex Titanium body optical DO sensor, 3M (10ft) - ODO9000/3
View Product Details >

Sensorex Titanium body optical DO sensor, 3M (10ft) - ODO9000/3




Item #SEN-ODO9000-3
BrandSensorex
Price: $1,774.74
Quantity:

Titanium body optical DO sensor, 3M (10ft)


Sensorex ODO9000 with Green Connector. Use with Extension Cable ODOA82 or ODOA83 - ODO9000-C
View Product Details >

Sensorex ODO9000 with Green Connector. Use with Extension Cable ODOA82 or ODOA83 - ODO9000-C




Item #SEN-ODO9000-C
BrandSensorex
Price: $2,037.51
Quantity:

ODO9000 with Green Connector. Use with Extension Cable ODOA82 or ODOA83


Sensorex Extension Cable for ODO8000-C and ODO9000-C, 10 Meters - ODOA82
View Product Details >

Sensorex Extension Cable for ODO8000-C and ODO9000-C, 10 Meters - ODOA82




Item #SEN-ODOA82
BrandSensorex
Price: $399.63
Quantity:

Extension Cable for ODO8000-C and ODO9000-C, 10 Meters


Sensorex Extension Cable for ODO8000-C and ODO9000-C, 25 Meters - ODOA83
View Product Details >

Sensorex Extension Cable for ODO8000-C and ODO9000-C, 25 Meters - ODOA83




Item #SEN-ODOA83
BrandSensorex
Price: $454.25
Quantity:

Extension Cable for ODO8000-C and ODO9000-C, 25 Meters


Sensorex pH Electrode w/Salt Crystal Ref, SJ, 10ft (3M) Cable, BNC - PP100/10/BNC
View Product Details >

Sensorex pH Electrode w/Salt Crystal Ref, SJ, 10ft (3M) Cable, BNC - PP100/10/BNC




Item #SEN-PP100-10-BNC
BrandSensorex
Price: $90.85
Quantity:

pH Electrode w/Salt Crystal Ref, SJ, 10ft (3M) Cable, BNC


Sensorex ORP Electrode Pt w/Salt Crystal Ref, SJ, 10ft (3M) Cable, BNC - PP100-ORP/10/BNC
View Product Details >

Sensorex ORP Electrode Pt w/Salt Crystal Ref, SJ, 10ft (3M) Cable, BNC - PP100-ORP/10/BNC




Item #SEN-PP100-ORP-10-BNC
BrandSensorex
Price: $131.39
Quantity:

ORP Electrode Pt w/Salt Crystal Ref, SJ, 10ft (3M) Cable, BNC


Sensorex pH Electrode w/Salt Crystal Ref, SJ, S8 - PP101
View Product Details >

Sensorex pH Electrode w/Salt Crystal Ref, SJ, S8 - PP101




Item #SEN-PP101
BrandSensorex
Price: $121.61
Quantity:

pH Electrode w/Salt Crystal Ref, SJ, S8


Sensorex ORP Electrode Pt w/Salt Crystal Ref, SJ, S8 - PP101-ORP
View Product Details >

Sensorex ORP Electrode Pt w/Salt Crystal Ref, SJ, S8 - PP101-ORP




Item #SEN-PP101-ORP
BrandSensorex
Price: $161.86
Quantity:

ORP Electrode Pt w/Salt Crystal Ref, SJ, S8


Sensorex pH Electrode w/Salt Crystal Ref, DJ, 10ft (3M) Cable, BNC - PP200/10/BNC
View Product Details >

Sensorex pH Electrode w/Salt Crystal Ref, DJ, 10ft (3M) Cable, BNC - PP200/10/BNC




Item #SEN-PP200-10-BNC
BrandSensorex
Price: $117.88
Quantity:

pH Electrode w/Salt Crystal Ref, DJ, 10ft (3M) Cable, BNC


Sensorex ORP Electrode Gold w/Salt Crystal Ref, DJ, 10ft (3M) Cable, BNC - PP200-ORP-AU/10/BNC
View Product Details >

Sensorex ORP Electrode Gold w/Salt Crystal Ref, DJ, 10ft (3M) Cable, BNC - PP200-ORP-AU/10/BNC




Item #SEN-PP200-ORP-AU-10-BNC
BrandSensorex
Price: $158.41
Quantity:

ORP Electrode Gold w/Salt Crystal Ref, DJ, 10ft (3M) Cable, BNC


Sensorex pH Electrode w/Salt Crystal Ref, DJ, S8 - PP201
View Product Details >

Sensorex pH Electrode w/Salt Crystal Ref, DJ, S8 - PP201




Item #SEN-PP201
BrandSensorex
Price: $127.65
Quantity:

pH Electrode w/Salt Crystal Ref, DJ, S8


Sensorex ORP Electrode Gold w/Salt Crystal Ref, SJ, S8 - PP201-ORP-AU
View Product Details >

Sensorex ORP Electrode Gold w/Salt Crystal Ref, SJ, S8 - PP201-ORP-AU




Item #SEN-PP201-ORP-AU
BrandSensorex
Price: $168.19
Quantity:

ORP Electrode Gold w/Salt Crystal Ref, SJ, S8


Sensorex Combination pH/ORP Electrode w/Salt Crystal Ref, DJ, 10ft (3M) Cable, BNC/BNC - PP300/10/BNC/BNC
View Product Details >

Sensorex Combination pH/ORP Electrode w/Salt Crystal Ref, DJ, 10ft (3M) Cable, BNC/BNC - PP300/10/BNC/BNC




Item #SEN-PP300-10-BNC-BNC
BrandSensorex
Price: $239.20
Quantity:

Combination pH/ORP Electrode w/Salt Crystal Ref, DJ, 10ft (3M) Cable, BNC/BNC


Sensorex Dual Platinum Band Potentiostatic Sensor, 10ft, BGLS, TL All - PSG200C
View Product Details >

Sensorex Dual Platinum Band Potentiostatic Sensor, 10ft, BGLS, TL All - PSG200C




Item #SEN-PSG200C
BrandSensorex
Price: $410.55
Quantity:

Dual Platinum Band Potentiostatic Sensor, 10ft, BGLS, TL All


Sensorex Comb pH electrode, 39 Inch (1M), BNC - S150C/BNC
View Product Details >

Sensorex Comb pH electrode, 39 Inch (1M), BNC - S150C/BNC




Item #SEN-S150C-BNC
BrandSensorex
Price: $73.60
Quantity:

Comb pH electrode, 39 Inch (1M), BNC


Sensorex Comb pH Electrode, 12ft, BNC - S200C/12/BNC
View Product Details >

Sensorex Comb pH Electrode, 12ft, BNC - S200C/12/BNC




Item #SEN-S200C-12-BNC
BrandSensorex
Price: $126.44
Quantity:

Comb pH Electrode, 12ft, BNC


Sensorex Comb pH Electrode, - S200C-HT
View Product Details >

Sensorex Comb pH Electrode, - S200C-HT




Item #SEN-S200C-HT
BrandSensorex
Price: $134.84
Quantity:

Comb pH Electrode,


Sensorex 3.5M KCl Refill Sol, 4oz. (662-1784) - S20-VWR
View Product Details >

Sensorex 3.5M KCl Refill Sol, 4oz. (662-1784) - S20-VWR




Item #SEN-S20-VWR
BrandSensorex
Price: $34.79
Quantity:

3.5M KCl Refill Sol, 4oz. (662-1784)


Sensorex Comb pH Elect,Uniloc BNC, Ref= - S210C
View Product Details >

Sensorex Comb pH Elect,Uniloc BNC, Ref= - S210C




Item #SEN-S210C
BrandSensorex
Price: $183.71
Quantity:

Comb pH Elect,Uniloc BNC, Ref=


Sensorex Comb pH Electrode,12 Inch, Uniloc BNC, Ref= - S210CD-HT
View Product Details >

Sensorex Comb pH Electrode,12 Inch, Uniloc BNC, Ref= - S210CD-HT




Item #SEN-S210CD-HT
BrandSensorex
Price: $247.25
Quantity:

Comb pH Electrode,12 Inch, Uniloc BNC, Ref=


Sensorex pH Electrode, 1ft, BNC - S215G
View Product Details >

Sensorex pH Electrode, 1ft, BNC - S215G




Item #SEN-S215G
BrandSensorex
Price: $167.90
Quantity:

pH Electrode, 1ft, BNC


Sensorex pH Electrode w L&N Screw Cap - S217G
View Product Details >

Sensorex pH Electrode w L&N Screw Cap - S217G




Item #SEN-S217G
BrandSensorex
Price: $225.11
Quantity:

pH Electrode w L&N Screw Cap


Sensorex Reference Electrode - S218R
View Product Details >

Sensorex Reference Electrode - S218R




Item #SEN-S218R
BrandSensorex
Price: $167.90
Quantity:

Reference Electrode


Sensorex Reference Electrode, Spade Lug, 6 Inch Cable - S218RD
View Product Details >

Sensorex Reference Electrode, Spade Lug, 6 Inch Cable - S218RD




Item #SEN-S218RD
BrandSensorex
Price: $194.93
Quantity:

Reference Electrode, Spade Lug, 6 Inch Cable


Sensorex Reference Electrode - S219R
View Product Details >

Sensorex Reference Electrode - S219R




Item #SEN-S219R
BrandSensorex
Price: $166.75
Quantity:

Reference Electrode


Sensorex Reference Electrode, Spade Lug, 12ft - S219RD
View Product Details >

Sensorex Reference Electrode, Spade Lug, 12ft - S219RD




Item #SEN-S219RD
BrandSensorex
Price: $194.35
Quantity:

Reference Electrode, Spade Lug, 12ft


Sensorex S224CD-ORP for Hi-Temp, Din 13.5 Cap - S224CD-ORP-HT
View Product Details >

Sensorex S224CD-ORP for Hi-Temp, Din 13.5 Cap - S224CD-ORP-HT




Item #SEN-S224CD-ORP-HT
BrandSensorex
Price: $234.31
Quantity:

S224CD-ORP for Hi-Temp, Din 13.5 Cap


Sensorex Comb ORP Hi-Temp Gold Electrode, Din 13.5 Cap - S224CD-ORP-HT-AU
View Product Details >

Sensorex Comb ORP Hi-Temp Gold Electrode, Din 13.5 Cap - S224CD-ORP-HT-AU




Item #SEN-S224CD-ORP-HT-AU
BrandSensorex
Price: $249.26
Quantity:

Comb ORP Hi-Temp Gold Electrode, Din 13.5 Cap


Sensorex S224CD-ORP, Low Conductivity Version - S224CD-ORP-LC
View Product Details >

Sensorex S224CD-ORP, Low Conductivity Version - S224CD-ORP-LC




Item #SEN-S224CD-ORP-LC
BrandSensorex
Price: $238.97
Quantity:

S224CD-ORP, Low Conductivity Version


Sensorex Comb pH Electrode, Spade Lug, 12ft Cable - S247CD
View Product Details >

Sensorex Comb pH Electrode, Spade Lug, 12ft Cable - S247CD




Item #SEN-S247CD
BrandSensorex
Price: $228.28
Quantity:

Comb pH Electrode, Spade Lug, 12ft Cable


Sensorex Comb pH Electrode, 20ft, BNC - S247CD/20/BNC
View Product Details >

Sensorex Comb pH Electrode, 20ft, BNC - S247CD/20/BNC




Item #SEN-S247CD-20-BNC
BrandSensorex
Price: $259.33
Quantity:

Comb pH Electrode, 20ft, BNC


Sensorex Comb ORP Electrode - S247CD-ORP
View Product Details >

Sensorex Comb ORP Electrode - S247CD-ORP




Item #SEN-S247CD-ORP
BrandSensorex
Price: $285.83
Quantity:

Comb ORP Electrode


Sensorex Comb ORP Electrode, 20ft, BNC - S247CD-ORP/20/BNC
View Product Details >

Sensorex Comb ORP Electrode, 20ft, BNC - S247CD-ORP/20/BNC




Item #SEN-S247CD-ORP-20-BNC
BrandSensorex
Price: $316.88
Quantity:

Comb ORP Electrode, 20ft, BNC


Sensorex Comb pH Electrode, Mini BP, 12 Inch Cable - S249CD
View Product Details >

Sensorex Comb pH Electrode, Mini BP, 12 Inch Cable - S249CD




Item #SEN-S249CD
BrandSensorex
Price: $197.51
Quantity:

Comb pH Electrode, Mini BP, 12 Inch Cable


Sensorex Comb pH Electrode - S252C
View Product Details >

Sensorex Comb pH Electrode - S252C




Item #SEN-S252C
BrandSensorex
Price: $198.38
Quantity:

Comb pH Electrode


Sensorex Comb pH Electrode - S252CD
View Product Details >

Sensorex Comb pH Electrode - S252CD




Item #SEN-S252CD
BrandSensorex
Price: $217.93
Quantity:

Comb pH Electrode


Sensorex Comb pH Electrode, 10ft, - S265CD-HT
View Product Details >

Sensorex Comb pH Electrode, 10ft, - S265CD-HT




Item #SEN-S265CD-HT
BrandSensorex
Price: $239.49
Quantity:

Comb pH Electrode, 10ft,


Sensorex Comb pH Electrode, 10ft, - S265CDHT-LC
View Product Details >

Sensorex Comb pH Electrode, 10ft, - S265CDHT-LC




Item #SEN-S265CDHT-LC
BrandSensorex
Price: $239.49
Quantity:

Comb pH Electrode, 10ft,


Sensorex S265CD-ORP gold version, - S265CD-ORP-AU
View Product Details >

Sensorex S265CD-ORP gold version, - S265CD-ORP-AU




Item #SEN-S265CD-ORP-AU
BrandSensorex
Price: $299.86
Quantity:

S265CD-ORP gold version,


Sensorex Comb ORP Electrode, 10ft, - S265CD-ORP-HT
View Product Details >

Sensorex Comb ORP Electrode, 10ft, - S265CD-ORP-HT




Item #SEN-S265CD-ORP-HT
BrandSensorex
Price: $292.39
Quantity:

Comb ORP Electrode, 10ft,


Sensorex Comb pH Electrode, 10ft, - S268CD-LC
View Product Details >

Sensorex Comb pH Electrode, 10ft, - S268CD-LC




Item #SEN-S268CD-LC
BrandSensorex
Price: $254.44
Quantity:

Comb pH Electrode, 10ft,


Sensorex Comb ORP/HF Electrode, Flat HF Gold, (plastic nose piece) 1/2in. NPT, 10ft, BNC - S268CD-ORP-AU
View Product Details >

Sensorex Comb ORP/HF Electrode, Flat HF Gold, (plastic nose piece) 1/2in. NPT, 10ft, BNC - S268CD-ORP-AU




Item #SEN-S268CD-ORP-AU
BrandSensorex
Price: $314.81
Quantity:

Comb ORP/HF Electrode, Flat HF Gold, (plastic nose piece) 1/2" NPT, 10ft, BNC


Sensorex S272CDHFTC modbus 485 output, 20ft (6M)/TL, required 12-24V DC power - S272CDHFTC-MB/P1K/20/TL/TL
View Product Details >

Sensorex S272CDHFTC modbus 485 output, 20ft (6M)/TL, required 12-24V DC power - S272CDHFTC-MB/P1K/20/TL/TL




Item #SEN-S272CDHFTC-MB-P1K-20-TL-TL
BrandSensorex
Price: $723.35
Quantity:

S272CDHFTC modbus 485 output, 20ft (6M)/TL, required 12-24V DC power


Sensorex S272CDHFTC modbus 485 output, 50ft/TL, required 12-24V DC power - S272CDHFTC-MB/P1K/50/TL/TL
View Product Details >

Sensorex S272CDHFTC modbus 485 output, 50ft/TL, required 12-24V DC power - S272CDHFTC-MB/P1K/50/TL/TL




Item #SEN-S272CDHFTC-MB-P1K-50-TL-TL
BrandSensorex
Price: $843.81
Quantity:

S272CDHFTC modbus 485 output, 50ft/TL, required 12-24V DC power


Sensorex S272CD-ORP-AU with 5mm Gold Disk Stem, 10ft - S272CD-ORP-AU-DSK
View Product Details >

Sensorex S272CD-ORP-AU with 5mm Gold Disk Stem, 10ft - S272CD-ORP-AU-DSK




Item #SEN-S272CD-ORP-AU-DSK
BrandSensorex
Price: $337.53
Quantity:

S272CD-ORP-AU with 5mm Gold Disk Stem, 10ft


Sensorex S272CD-ORP, 10ft, BNC - LC Version - S272CD-ORP-LC/10/BNC
View Product Details >

Sensorex S272CD-ORP, 10ft, BNC - LC Version - S272CD-ORP-LC/10/BNC




Item #SEN-S272CD-ORP-LC-10-BNC
BrandSensorex
Price: $334.71
Quantity:

S272CD-ORP, 10ft, BNC - LC Version


Sensorex S272CD-ORP,10ft cable, TL w modbus 485 output,12-24V Power req. - S272CD-ORP-MB/10/TL/TL
View Product Details >

Sensorex S272CD-ORP,10ft cable, TL w modbus 485 output,12-24V Power req. - S272CD-ORP-MB/10/TL/TL




Item #SEN-S272CD-ORP-MB-10-TL-TL
BrandSensorex
Price: $681.43
Quantity:

S272CD-ORP,10ft cable, TL w modbus 485 output,12-24V Power req.


Sensorex Comb pH Electrode, 10ft, Advise TC + 2 Connectors - S272CDTC/CSTM
View Product Details >

Sensorex Comb pH Electrode, 10ft, Advise TC + 2 Connectors - S272CDTC/CSTM




Item #SEN-S272CDTC-CSTM
BrandSensorex
Price: $292.68
Quantity:

Comb pH Electrode, 10ft, Advise TC + 2 Connectors


Sensorex S272CDTC-Horizontal Mount, P1K, 10ft, TL, 4-20mA output, 24V Power required - S272CDTC-HM/MA/P1K/10/TL/TL
View Product Details >

Sensorex S272CDTC-Horizontal Mount, P1K, 10ft, TL, 4-20mA output, 24V Power required - S272CDTC-HM/MA/P1K/10/TL/TL




Item #SEN-S272CDTC-HM-MA-P1K-10-TL-TL
BrandSensorex
Price: $715.01
Quantity:

S272CDTC-Horizontal Mount, P1K, 10ft, TL, 4-20mA output, 24V Power required


Sensorex S272CDTC P1K, TL with 4-20mA output, 24V Power required Cable = - S272CDTC-MA/P1K
View Product Details >

Sensorex S272CDTC P1K, TL with 4-20mA output, 24V Power required Cable = - S272CDTC-MA/P1K




Item #SEN-S272CDTC-MA-P1K
BrandSensorex
Price: $667.29
Quantity:

S272CDTC P1K, TL with 4-20mA output, 24V Power required Cable =


Sensorex S272CDTC P1K, MB2, 12-24V Power Required, Cable + 2 Connectors (Configurable) - S272CDTC-MB/P1K
View Product Details >

Sensorex S272CDTC P1K, MB2, 12-24V Power Required, Cable + 2 Connectors (Configurable) - S272CDTC-MB/P1K




Item #SEN-S272CDTC-MB-P1K
BrandSensorex
Price: $652.63
Quantity:

S272CDTC P1K, MB2, 12-24V Power Required, Cable + 2 Connectors (Configurable)


Sensorex S272CDTC modbus 485 output, 10ft cable, tinned leads, required 12-24V DC power - S272CDTC-MB/P1K/10/TL/TL
View Product Details >

Sensorex S272CDTC modbus 485 output, 10ft cable, tinned leads, required 12-24V DC power - S272CDTC-MB/P1K/10/TL/TL




Item #SEN-S272CDTC-MB-P1K-10-TL-TL
BrandSensorex
Price: $652.63
Quantity:

S272CDTC modbus 485 output, 10ft cable, tinned leads, required 12-24V DC power


Sensorex S272CDTC modbus 485 output, 20ft (6M)/TL, required 12-24V DC power - S272CDTC-MB/P1K/20/TL/TL
View Product Details >

Sensorex S272CDTC modbus 485 output, 20ft (6M)/TL, required 12-24V DC power - S272CDTC-MB/P1K/20/TL/TL




Item #SEN-S272CDTC-MB-P1K-20-TL-TL
BrandSensorex
Price: $684.83
Quantity:

S272CDTC modbus 485 output, 20ft (6M)/TL, required 12-24V DC power


Sensorex S272CDTC modbus 485 output, 50ft (15M)/TL, required 12-24V DC power - S272CDTC-MB1/P1K/50/TL/TL
View Product Details >

Sensorex S272CDTC modbus 485 output, 50ft (15M)/TL, required 12-24V DC power - S272CDTC-MB1/P1K/50/TL/TL




Item #SEN-S272CDTC-MB1-P1K-50-TL-TL
BrandSensorex
Price: $744.34
Quantity:

S272CDTC modbus 485 output, 50ft (15M)/TL, required 12-24V DC power


Sensorex Comb pH/HF Electrode, - S350CDHF/CSTM
View Product Details >

Sensorex Comb pH/HF Electrode, - S350CDHF/CSTM




Item #SEN-S350CDHF-CSTM
BrandSensorex
Price: $248.40
Quantity:

Comb pH/HF Electrode,


Sensorex Comb pH/HF Electrode, - S350CDHF-HT
View Product Details >

Sensorex Comb pH/HF Electrode, - S350CDHF-HT




Item #SEN-S350CDHF-HT
BrandSensorex
Price: $265.08
Quantity:

Comb pH/HF Electrode,


Sensorex Comb pH Electrode, - S350CD-HM
View Product Details >

Sensorex Comb pH Electrode, - S350CD-HM




Item #SEN-S350CD-HM
BrandSensorex
Price: $226.55
Quantity:

Comb pH Electrode,


Sensorex Comb ORP Electrode, - S350CD-ORP-HT
View Product Details >

Sensorex Comb ORP Electrode, - S350CD-ORP-HT




Item #SEN-S350CD-ORP-HT
BrandSensorex
Price: $283.48
Quantity:

Comb ORP Electrode,


Sensorex pH Electrode, - S500G
View Product Details >

Sensorex pH Electrode, - S500G




Item #SEN-S500G
BrandSensorex
Price: $94.30
Quantity:

pH Electrode,


Sensorex ORP Electrode, - S500P
View Product Details >

Sensorex ORP Electrode, - S500P




Item #SEN-S500P
BrandSensorex
Price: $135.41
Quantity:

ORP Electrode,


Sensorex REDOX/ORP Electrode, Spade Lug, 6 Inch Cable - S531P
View Product Details >

Sensorex REDOX/ORP Electrode, Spade Lug, 6 Inch Cable - S531P




Item #SEN-S531P
BrandSensorex
Price: $176.53
Quantity:

REDOX/ORP Electrode, Spade Lug, 6 Inch Cable


Sensorex Comb Gold ORP Electrode, Ext Tip, CG, BTD BNC, - S550CD-ORP-HF-AU
View Product Details >

Sensorex Comb Gold ORP Electrode, Ext Tip, CG, BTD BNC, - S550CD-ORP-HF-AU




Item #SEN-S550CD-ORP-HF-AU
BrandSensorex
Price: $255.36
Quantity:

Comb Gold ORP Electrode, Ext Tip, CG, BTD BNC,


Sensorex Comb ORP Electrode,.020in. Dia Extended Tip, - S550C-ORP/CSTM
View Product Details >

Sensorex Comb ORP Electrode,.020in. Dia Extended Tip, - S550C-ORP/CSTM




Item #SEN-S550C-ORP-CSTM
BrandSensorex
Price: $182.05
Quantity:

Comb ORP Electrode,.020" Dia Extended Tip,


Sensorex Comb Gold ORP Electrode, Ext Tip, CG, - S550C-ORP-AU/CSTM
View Product Details >

Sensorex Comb Gold ORP Electrode, Ext Tip, CG, - S550C-ORP-AU/CSTM




Item #SEN-S550C-ORP-AU-CSTM
BrandSensorex
Price: $218.50
Quantity:

Comb Gold ORP Electrode, Ext Tip, CG,


Sensorex Comb pH/Reference Electrode - S645CD-HT
View Product Details >

Sensorex Comb pH/Reference Electrode - S645CD-HT




Item #SEN-S645CD-HT
BrandSensorex
Price: $309.64
Quantity:

Comb pH/Reference Electrode


Sensorex Comb REDOX/ORP Electrode - S645CD-ORP-HT
View Product Details >

Sensorex Comb REDOX/ORP Electrode - S645CD-ORP-HT




Item #SEN-S645CD-ORP-HT
BrandSensorex
Price: $392.73
Quantity:

Comb REDOX/ORP Electrode


Sensorex Comb pH/Reference PVDF Electrode - S645KD-HT
View Product Details >

Sensorex Comb pH/Reference PVDF Electrode - S645KD-HT




Item #SEN-S645KD-HT
BrandSensorex
Price: $525.55
Quantity:

Comb pH/Reference PVDF Electrode


Sensorex Comb pH Electrode, PVDF - S645KD-HT-KNO3
View Product Details >

Sensorex Comb pH Electrode, PVDF - S645KD-HT-KNO3




Item #SEN-S645KD-HT-KNO3
BrandSensorex
Price: $560.91
Quantity:

Comb pH Electrode, PVDF


Sensorex Comb pH Electrode, PVDF - S645KD-KNO3
View Product Details >

Sensorex Comb pH Electrode, PVDF - S645KD-KNO3




Item #SEN-S645KD-KNO3
BrandSensorex
Price: $525.55
Quantity:

Comb pH Electrode, PVDF


Sensorex Comb pH Electrode, PVDF - S645KD-LC
View Product Details >

Sensorex Comb pH Electrode, PVDF - S645KD-LC




Item #SEN-S645KD-LC
BrandSensorex
Price: $525.55
Quantity:

Comb pH Electrode, PVDF


Sensorex Comb ORP Electrode - S645KD-ORP-HT
View Product Details >

Sensorex Comb ORP Electrode - S645KD-ORP-HT




Item #SEN-S645KD-ORP-HT
BrandSensorex
Price: $587.08
Quantity:

Comb ORP Electrode


Sensorex Comb ORP Electrode, PVDF - S645KD-ORP-LC
View Product Details >

Sensorex Comb ORP Electrode, PVDF - S645KD-ORP-LC




Item #SEN-S645KD-ORP-LC
BrandSensorex
Price: $593.46
Quantity:

Comb ORP Electrode, PVDF


Sensorex Comb pH/HF Electrode - Special Order 3wk - Stock = S651CDHF - S650CDHF-HT
View Product Details >

Sensorex Comb pH/HF Electrode - Special Order 3wk - Stock = S651CDHF - S650CDHF-HT




Item #SEN-S650CDHF-HT
BrandSensorex
Price: $363.11
Quantity:

Comb pH/HF Electrode - Special Order 3wk - Stock = S651CDHF


Sensorex Comb pH/HF Electrode - S650CDHF-LC
View Product Details >

Sensorex Comb pH/HF Electrode - S650CDHF-LC




Item #SEN-S650CDHF-LC
BrandSensorex
Price: $363.11
Quantity:

Comb pH/HF Electrode


Sensorex Comb ORP Electrode - S650CDHF-ORP
View Product Details >

Sensorex Comb ORP Electrode - S650CDHF-ORP




Item #SEN-S650CDHF-ORP
BrandSensorex
Price: $391.35
Quantity:

Comb ORP Electrode


Sensorex Comb pH Electrode - S650CD-HT-LC
View Product Details >

Sensorex Comb pH Electrode - S650CD-HT-LC




Item #SEN-S650CD-HT-LC
BrandSensorex
Price: $357.94
Quantity:

Comb pH Electrode


Sensorex Comb pH Electrode - S650CD-ORP-LC
View Product Details >

Sensorex Comb pH Electrode - S650CD-ORP-LC




Item #SEN-S650CD-ORP-LC
BrandSensorex
Price: $386.17
Quantity:

Comb pH Electrode


Sensorex Comb REDOX/ORP Electrode - S650CD-ORP-SI
View Product Details >

Sensorex Comb REDOX/ORP Electrode - S650CD-ORP-SI




Item #SEN-S650CD-ORP-SI
BrandSensorex
Price: $376.40
Quantity:

Comb REDOX/ORP Electrode


Sensorex Comb pH Electrode - S650CD-SI
View Product Details >

Sensorex Comb pH Electrode - S650CD-SI




Item #SEN-S650CD-SI
BrandSensorex
Price: $318.84
Quantity:

Comb pH Electrode


Sensorex Comb pH Electrode Low Conductivity - S651KD-LC
View Product Details >

Sensorex Comb pH Electrode Low Conductivity - S651KD-LC




Item #SEN-S651KD-LC
BrandSensorex
Price: $502.84
Quantity:

Comb pH Electrode Low Conductivity


Sensorex Comb ORP Electrode, Gold Measuring Surface - S656CD-ORP-AU
View Product Details >

Sensorex Comb ORP Electrode, Gold Measuring Surface - S656CD-ORP-AU




Item #SEN-S656CD-ORP-AU
BrandSensorex
Price: $357.08
Quantity:

Comb ORP Electrode, Gold Measuring Surface


Sensorex Comb pH Electrode - S660CDHF-LC
View Product Details >

Sensorex Comb pH Electrode - S660CDHF-LC




Item #SEN-S660CDHF-LC
BrandSensorex
Price: $322.58
Quantity:

Comb pH Electrode


Sensorex Comb pH Electrode - S660CD-KNO3
View Product Details >

Sensorex Comb pH Electrode - S660CD-KNO3




Item #SEN-S660CD-KNO3
BrandSensorex
Price: $288.08
Quantity:

Comb pH Electrode


Sensorex Comb ORP Electrode - S660CD-ORP-LC
View Product Details >

Sensorex Comb ORP Electrode - S660CD-ORP-LC




Item #SEN-S660CD-ORP-LC
BrandSensorex
Price: $345.63
Quantity:

Comb ORP Electrode


Sensorex Comb ORP Electrode - S660CD-ORP-SI
View Product Details >

Sensorex Comb ORP Electrode - S660CD-ORP-SI




Item #SEN-S660CD-ORP-SI
BrandSensorex
Price: $335.86
Quantity:

Comb ORP Electrode


Sensorex Comb pH Electrode - S661CD-KNO3
View Product Details >

Sensorex Comb pH Electrode - S661CD-KNO3




Item #SEN-S661CD-KNO3
BrandSensorex
Price: $352.19
Quantity:

Comb pH Electrode


Sensorex Comb ORP Electrode - S661CD-ORP-LC
View Product Details >

Sensorex Comb ORP Electrode - S661CD-ORP-LC




Item #SEN-S661CD-ORP-LC
BrandSensorex
Price: $409.75
Quantity:

Comb ORP Electrode


Sensorex Insertion Assembly - 25ft, P1K (Verify Burkert USA or Canada Connector) - S675TC/P1K/25/BURKERT
View Product Details >

Sensorex Insertion Assembly - 25ft, P1K (Verify Burkert USA or Canada Connector) - S675TC/P1K/25/BURKERT




Item #SEN-S675TC-P1K-25-BURKERT
BrandSensorex
Price: $748.94
Quantity:

Insertion Ass'y - 25ft, P1K (Verify Burkert USA or Canada Connector)


Sensorex Comb ORP Electrode - S8000CD-ORP-KNO3
View Product Details >

Sensorex Comb ORP Electrode - S8000CD-ORP-KNO3




Item #SEN-S8000CD-ORP-KNO3
BrandSensorex
Price: $351.96
Quantity:

Comb ORP Electrode


Sensorex Cap/Cable with Coax for EA & EM Parts, - S853/CSTM
View Product Details >

Sensorex Cap/Cable with Coax for EA & EM Parts, - S853/CSTM




Item #SEN-S853-CSTM
BrandSensorex
Price: $96.89
Quantity:

Cap/Cable with Coax for EA & EM Parts,


Sensorex Cable for Smart and 4-20mA sensors, 5ft, TL/TL - S856/5/TL/TL
View Product Details >

Sensorex Cable for Smart and 4-20mA sensors, 5ft, TL/TL - S856/5/TL/TL




Item #SEN-S856-5-TL-TL
BrandSensorex
Price: $109.25
Quantity:

Cable for Smart and 4-20mA sensors, 5ft, TL/TL


Sensorex Reference Electrode - S900R
View Product Details >

Sensorex Reference Electrode - S900R




Item #SEN-S900R
BrandSensorex
Price: $197.51
Quantity:

Reference Electrode


Sensorex Reference Electrode - S900RD
View Product Details >

Sensorex Reference Electrode - S900RD




Item #SEN-S900RD
BrandSensorex
Price: $222.81
Quantity:

Reference Electrode


Sensorex Comb pH Electrode, - S901C
View Product Details >

Sensorex Comb pH Electrode, - S901C




Item #SEN-S901C
BrandSensorex
Price: $222.81
Quantity:

Comb pH Electrode,


Sensorex Reference Electrode - S901RD
View Product Details >

Sensorex Reference Electrode - S901RD




Item #SEN-S901RD
BrandSensorex
Price: $169.63
Quantity:

Reference Electrode


Sensorex SD7000CD-ORP Universal Sensor, Battery Powered, P1K, 30ft, TL - SD7500CD-ORP/30/TL
View Product Details >

Sensorex SD7000CD-ORP Universal Sensor, Battery Powered, P1K, 30ft, TL - SD7500CD-ORP/30/TL




Item #SEN-SD7500CD-ORP-30-TL
BrandSensorex
Price: $1,076.17
Quantity:

SD7000CD-ORP Universal Sensor, Battery Powered, P1K, 30ft, TL


Sensorex Glass body pH sensor with HDPE junction, 12mm OD 150mmL, 1M Cable, BNC - SG150C/BNC
View Product Details >

Sensorex Glass body pH sensor with HDPE junction, 12mm OD 150mmL, 1M Cable, BNC - SG150C/BNC




Item #SEN-SG150C-BNC
BrandSensorex
Price: $143.18
Quantity:

Glass body pH sensor with HDPE junction, 12mm OD 150mmL, 1M Cable, BNC


Sensorex Comb pH Electrode w/Annular Ceramic Junction, - SG2000CD
View Product Details >

Sensorex Comb pH Electrode w/Annular Ceramic Junction, - SG2000CD




Item #SEN-SG2000CD
BrandSensorex
Price: $149.11
Quantity:

Comb pH Electrode w/Annular Ceramic Junction,


Sensorex pH Electrode, 39 Inch (1M), BNC - SG200G
View Product Details >

Sensorex pH Electrode, 39 Inch (1M), BNC - SG200G




Item #SEN-SG200G
BrandSensorex
Price: $143.18
Quantity:

pH Electrode, 39 Inch (1M), BNC


Sensorex Glass Body pH Sensor, - SG202C
View Product Details >

Sensorex Glass Body pH Sensor, - SG202C




Item #SEN-SG202C
BrandSensorex
Price: $146.63
Quantity:

Glass Body pH Sensor,


Sensorex Glass Body pH Sensor, Round Bulb, 10ft - SG202CD
View Product Details >

Sensorex Glass Body pH Sensor, Round Bulb, 10ft - SG202CD




Item #SEN-SG202CD
BrandSensorex
Price: $166.18
Quantity:

Glass Body pH Sensor, Round Bulb, 10ft


Sensorex SG200C, HDPE junction - SG205C
View Product Details >

Sensorex SG200C, HDPE junction - SG205C




Item #SEN-SG205C
BrandSensorex
Price: $143.18
Quantity:

SG200C, HDPE junction


Sensorex SG200CD, HDPE junction - SG205CD
View Product Details >

Sensorex SG200CD, HDPE junction - SG205CD




Item #SEN-SG205CD
BrandSensorex
Price: $169.91
Quantity:

SG200CD, HDPE junction


Sensorex Glass body ORP sensor, double jnct, Conical HDPE jnct (SG205), gold disk 0.175" OD stem - SG205CD-ORP/AU
View Product Details >

Sensorex Glass body ORP sensor, double jnct, Conical HDPE jnct (SG205), gold disk 0.175" OD stem - SG205CD-ORP/AU




Item #SEN-SG205CD-ORP-AU
BrandSensorex
Price: $293.60
Quantity:

Glass body ORP sensor, double jnct, Conical HDPE jnct (SG205), gold disk 0.175" OD stem


Sensorex Comb ORP Gold Electrode with Acryl Gel, Din 13.5 Cap - SG224CD-ORP-HT-AU
View Product Details >

Sensorex Comb ORP Gold Electrode with Acryl Gel, Din 13.5 Cap - SG224CD-ORP-HT-AU




Item #SEN-SG224CD-ORP-HT-AU
BrandSensorex
Price: $308.20
Quantity:

Comb ORP Gold Electrode with Acryl Gel, Din 13.5 Cap


Sensorex pH Electrode with Acryl Gel Reference for Hi-Temp - SG350CD-HT
View Product Details >

Sensorex pH Electrode with Acryl Gel Reference for Hi-Temp - SG350CD-HT




Item #SEN-SG350CD-HT
BrandSensorex
Price: $292.68
Quantity:

pH Electrode with Acryl Gel Reference for Hi-Temp


Sensorex pH Electrode, - SG900G
View Product Details >

Sensorex pH Electrode, - SG900G




Item #SEN-SG900G
BrandSensorex
Price: $228.46
Quantity:

pH Electrode,


Sensorex Reference Electrode - SG900R
View Product Details >

Sensorex Reference Electrode - SG900R




Item #SEN-SG900R
BrandSensorex
Price: $120.65
Quantity:

Reference Electrode


Sensorex Toroidal Conduct, 20/30, Polypro, 20ft, TL/TL, TC= - TCS2000
View Product Details >

Sensorex Toroidal Conduct, 20/30, Polypro, 20ft, TL/TL, TC= - TCS2000




Item #SEN-TCS2000
BrandSensorex
Price: $1,170.41
Quantity:

Toroidal Conduct, 20/30, Polypro, 20ft, TL/TL, TC=


Sensorex Toroidal Conductivity Sensor, Polypro, PT1, 20FT, TL/TL - TCS2000/PT1/20/TL
View Product Details >

Sensorex Toroidal Conductivity Sensor, Polypro, PT1, 20FT, TL/TL - TCS2000/PT1/20/TL




Item #SEN-TCS2000-PT1-20-TL
BrandSensorex
Price: $1,170.41
Quantity:

Toroidal Conductivity Sensor, Polypro, PT1, 20FT, TL/TL


Sensorex Toroidal Conduct, 20/20, PPO, 20ft, TL/TL, TC= - TCS2020
View Product Details >

Sensorex Toroidal Conduct, 20/20, PPO, 20ft, TL/TL, TC= - TCS2020




Item #SEN-TCS2020
BrandSensorex
Price: $1,170.41
Quantity:

Toroidal Conduct, 20/20, PPO, 20ft, TL/TL, TC=


Sensorex TCS3020/P1K 4-20mA output, 20ft cable, TL, req 24V power 0-1,000,000uS range - TCS3020/P1K/MA/20/TL/TL
View Product Details >

Sensorex TCS3020/P1K 4-20mA output, 20ft cable, TL, req 24V power 0-1,000,000uS range - TCS3020/P1K/MA/20/TL/TL




Item #SEN-TCS3020-P1K-MA-20-TL-TL
BrandSensorex
Price: $1,137.64
Quantity:

TCS3020/P1K 4-20mA output, 20ft cable, TL, req 24V power 0-1,000,000uS range


Sensorex Panel Mount Bracket for TCSAC - TCSAA-001
View Product Details >

Sensorex Panel Mount Bracket for TCSAC - TCSAA-001




Item #SEN-TCSAA-001
BrandSensorex
Price: $172.50
Quantity:

Panel Mount Bracket for TCSAC


Sensorex Toroidal Conductivity Transmitter, 100-240 VAC Powered - TCSAC
View Product Details >

Sensorex Toroidal Conductivity Transmitter, 100-240 VAC Powered - TCSAC




Item #SEN-TCSAC
BrandSensorex
Price: $3,295.61
Quantity:

Toroidal Conductivity Transmitter, 100-240 VAC Powered


Sensorex TCS3020, 3/4in. PEEK Threaded Body, - TCSP3020
View Product Details >

Sensorex TCS3020, 3/4in. PEEK Threaded Body, - TCSP3020




Item #SEN-TCSP3020
BrandSensorex
Price: $976.93
Quantity:

TCS3020, 3/4" PEEK Threaded Body,


Sensorex TCS3020, 3/4in. PEEK Threaded Body, P1K, 10ft, TL - TCSP3020-1-CC-3-A-1
View Product Details >

Sensorex TCS3020, 3/4in. PEEK Threaded Body, P1K, 10ft, TL - TCSP3020-1-CC-3-A-1




Item #SEN-TCSP3020-1-CC-3-A-1
BrandSensorex
Price: $1,048.80
Quantity:

TCS3020, 3/4" PEEK Threaded Body, P1K, 10ft, TL


Sensorex TCS3020, PEEK Body, 2in. Sanitary Flange, P1K, 10ft, TL - TCSP3020-1-CC-3-A-2
View Product Details >

Sensorex TCS3020, PEEK Body, 2in. Sanitary Flange, P1K, 10ft, TL - TCSP3020-1-CC-3-A-2




Item #SEN-TCSP3020-1-CC-3-A-2
BrandSensorex
Price: $987.85
Quantity:

TCS3020, PEEK Body, 2" Sanitary Flange, P1K, 10ft, TL


Sensorex TCSP3020, 3/4in. PEEK Threaded Body, P1K, 20ft, TL - TCSP3020-1-CD-3-A-1
View Product Details >

Sensorex TCSP3020, 3/4in. PEEK Threaded Body, P1K, 20ft, TL - TCSP3020-1-CD-3-A-1




Item #SEN-TCSP3020-1-CD-3-A-1
BrandSensorex
Price: $1,102.28
Quantity:

TCSP3020, 3/4" PEEK Threaded Body, P1K, 20ft, TL


Sensorex TCS3020, PEEK Body, 2in. Sanitary Flange, P1K, 20ft, TL - TCSP3020-1-CD-3-A-2
View Product Details >

Sensorex TCS3020, PEEK Body, 2in. Sanitary Flange, P1K, 20ft, TL - TCSP3020-1-CD-3-A-2




Item #SEN-TCSP3020-1-CD-3-A-2
BrandSensorex
Price: $1,039.31
Quantity:

TCS3020, PEEK Body, 2" Sanitary Flange, P1K, 20ft, TL


Sensorex TCS3020, 3/4in. PEEK Threaded Body, P1K, 10ft, TL - TCSP3021-1-CC-3-A-1
View Product Details >

Sensorex TCS3020, 3/4in. PEEK Threaded Body, P1K, 10ft, TL - TCSP3021-1-CC-3-A-1




Item #SEN-TCSP3021-1-CC-3-A-1
BrandSensorex
Price: $1,048.80
Quantity:

TCS3020, 3/4" PEEK Threaded Body, P1K, 10ft, TL


Sensorex TCS3020, PEEK Body, 2in. Sanitary Flange, P1K, 10ft, TL - TCSP3021-1-CC-3-A-2
View Product Details >

Sensorex TCS3020, PEEK Body, 2in. Sanitary Flange, P1K, 10ft, TL - TCSP3021-1-CC-3-A-2




Item #SEN-TCSP3021-1-CC-3-A-2
BrandSensorex
Price: $987.85
Quantity:

TCS3020, PEEK Body, 2" Sanitary Flange, P1K, 10ft, TL


Sensorex TCSP3020, PEEK, Threaded Body, P1K, 20ft, TL - TCSP3021-1-CD-3-A-1
View Product Details >

Sensorex TCSP3020, PEEK, Threaded Body, P1K, 20ft, TL - TCSP3021-1-CD-3-A-1




Item #SEN-TCSP3021-1-CD-3-A-1
BrandSensorex
Price: $1,102.28
Quantity:

TCSP3020, PEEK, Threaded Body, P1K, 20ft, TL


Sensorex TCS3020, PEEK Body, 2in. Sanitary Flange, P1K, 20ft, TL - TCSP3021-1-CD-3-A-2
View Product Details >

Sensorex TCS3020, PEEK Body, 2in. Sanitary Flange, P1K, 20ft, TL - TCSP3021-1-CD-3-A-2




Item #SEN-TCSP3021-1-CD-3-A-2
BrandSensorex
Price: $1,039.31
Quantity:

TCS3020, PEEK Body, 2" Sanitary Flange, P1K, 20ft, TL


Sensorex Panel Mount Kit for TCSMA, TCSTX - TCSTA-001
View Product Details >

Sensorex Panel Mount Kit for TCSMA, TCSTX - TCSTA-001




Item #SEN-TCSTA-001
BrandSensorex
Price: $220.80
Quantity:

Panel Mount Kit for TCSMA, TCSTX


Sensorex Toroidal Conductivity Transmitter, 100-240 VAC (Concentration) - TCSTC
View Product Details >

Sensorex Toroidal Conductivity Transmitter, 100-240 VAC (Concentration) - TCSTC




Item #SEN-TCSTC
BrandSensorex
Price: $2,775.53
Quantity:

Toroidal Conductivity Transmitter, 100-240 VAC (Concentration)


Sensorex Conductivity Solution, 84uS KCl, 1Pt. - TDSK84/P
View Product Details >

Sensorex Conductivity Solution, 84uS KCl, 1Pt. - TDSK84/P




Item #SEN-TDSK84-P
BrandSensorex
Price: $14.66
Quantity:

Conductivity Solution, 84uS KCl, 1Pt.


Sensorex Temperature Sensor, 10ft/TL, TC= - TE225/CSTM
View Product Details >

Sensorex Temperature Sensor, 10ft/TL, TC= - TE225/CSTM




Item #SEN-TE225-CSTM
BrandSensorex
Price: $117.88
Quantity:

Temperature Sensor, 10ft/TL, TC=


Sensorex Temperature Sensor, TL, TC= - TE250
View Product Details >

Sensorex Temperature Sensor, TL, TC= - TE250




Item #SEN-TE250
BrandSensorex
Price: $105.23
Quantity:

Temperature Sensor, TL, TC=


Sensorex Temperature Sensor, Stainless Steel, 10K ATC, 3ft, 8-Pin - TE-PM1000
View Product Details >

Sensorex Temperature Sensor, Stainless Steel, 10K ATC, 3ft, 8-Pin - TE-PM1000




Item #SEN-TE-PM1000
BrandSensorex
Price: $146.63
Quantity:

Temperature Sensor, Stainless Steel, 10K ATC, 3ft, 8-Pin


Sensorex Crimp style TNC connector with All Parts, 1 per Bag - TNC-KIT
View Product Details >

Sensorex Crimp style TNC connector with All Parts, 1 per Bag - TNC-KIT




Item #SEN-TNC-KIT
BrandSensorex
Price: $11.79
Quantity:

Crimp style TNC connector with All Parts, 1 per Bag


Sensorex TNR Kit of 10 each 270323 per Bag - TNR-KIT
View Product Details >

Sensorex TNR Kit of 10 each 270323 per Bag - TNR-KIT




Item #SEN-TNR-KIT
BrandSensorex
Price: $107.81
Quantity:

TNR Kit of 10 each 270323 per Bag


Sensorex Panel mount kit for TX105 and CX105 transmitters - TX105A
View Product Details >

Sensorex Panel mount kit for TX105 and CX105 transmitters - TX105A




Item #SEN-TX105A
BrandSensorex
Price: $165.50
Quantity:

Panel mount kit for TX105 and CX105 transmitters


Sensorex TX10 Transmitter Mounting Clip - TX10A
View Product Details >

Sensorex TX10 Transmitter Mounting Clip - TX10A




Item #SEN-TX10A
BrandSensorex
Price: $9.84
Quantity:

TX10 Transmitter Mounting Clip


Sensorex TX2000 & CX2000 Wall Mount Plate - TX2A-001
View Product Details >

Sensorex TX2000 & CX2000 Wall Mount Plate - TX2A-001




Item #SEN-TX2A-001
BrandSensorex
Price: $76.48
Quantity:

TX2000 & CX2000 Wall Mount Plate


Sensorex pH Sensor, Bulb, 3/4" NPT, PPS - S267C-10-BNC
View Product Details >

Sensorex pH Sensor, Bulb, 3/4" NPT, PPS - S267C-10-BNC




Item #SEN-S267C-10-BNC
BrandSensorex
Price: $173.65
Quantity:

pH Sensor, Bulb, 3/4" NPT, PPS


Results: 1-24 of 416
Items per page:
Sort by:
JJS Technical Services
JJS Technical Services 1900 East Golf Rd., Suite 950 Schaumburg, IL 60173

1-866-4 JJSTECH (1-866-455-7832) sales@jjstech.com

Company
Orders
More
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
  • JJS Technical Services
Ask an Expert

1-866-4 JJSTECH(1-866-455-7832)

Email Us
  • HACKER SAFE certified sites prevent over 99.9% of hacker crime.
  • Authorize.Net Merchant - Click to Verify

Copyright ©2000-2023. JJS Technical Services. Logos and Trademarks are the property of their respective owners. All Rights Reserved.