1-866-4 JJSTECH(1-866-455-7832)

Honeywell Analytics Sensepoint XCD RFD Transmitter with LM25, 3/4 in. NPT Entry, Aluminum - SPXCDULNRFD

Item #:
SPXCDULNRFD
Brand:
Honeywell Analytics
Honeywell Analytics Sensepoint XCD RFD Transmitter with LM25, 3/4 in. NPT Entry, Aluminum - SPXCDULNRFD
$1,072.00
Qty
Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
Honeywell Analytics Sensepoint XCD RFD Transmitter with LM25, 3/4 in. NPT Entry, Aluminum - SPXCDULNRFD

Honeywell Analytics Sensepoint XCD RFD Transmitter with LM25, 3/4 in. NPT Entry, Aluminum - SPXCDULNRFD

$1,072.00

SPXCDULNRFD XCD RFD Transmitter with LM25, 3/4 in. NPT Entry, Aluminum by Honeywell Analytics

Sensepoint XCD RFD is your most flexible, practical choice for remote flammable gas monitoring in Class I Division 1 areas.

XCD RFD adds safety, productivity and cost efficiency to an operation by extending intelligent, simplified gas monitoring to hard-to-reach areas. XCD's inherent flexibility (through its modular product design and remote monitoring options) is stretched further to help make an operation run more smoothly and easily, adding bottom line value on top of state-of-the-art safety benefits.

You can mount the sensor up to 100 feet away from the transmitter, so even the most hard-to-access areas can be monitored and protected. What's more, XCD RFD tells you at a glance whether your equipment is operating properly and keeping you safe. You get continuous, long-term value by conveying accurate gas readings through a rugged, reliable sensing technology, a hallmark of Honeywell. XCD RFD saves you money over the life of your monitoring system.

High Value Sensing Technology

  • Poison-resistant catalytic bead sensors offer reliable, long-lasting sensing life in an explosion-proof assembly
  • Low power consumption, reducing cost of ownership
  • Accurate detection with fast response

Easy-Mount Utility

  • Mount transmitter in easy to access area even if sensor is located in difficult or restricted access area
  • Mount sensor up to 100 feet from transmitter
  • Mounting hardware available for pipe, duct and junction box installations

Easy to Use

  • Easy to read tri-color backlit display with digits, bar graph and icons
  • Fully configurable via non-intrusive magnetic switches
  • Selectable sink or source 4-20mA output
  • Auto-inhibit during maintenance prevents false alarms

Cost Effective

  • Common transmitter platform: monitor full range of flammable gases
  • Longer sensor life compared to electrochemical sensors
  • Simple operation cuts training costs
  • Reduced spares and stock costs
  • Non-intrusive, one-man operation reduces maintenance cost
  • Optional Modbus adds diagnostic capabilities and advanced intelligence to further reduce costs
Use 3-wire, 4-20mA, transmitter with optional Modbus for use with remotely mounted flammable gas sensors 705 and 705HT
Electrical
Input Voltage Range 16 to 32VDC (24VDC nominal)
Max Power Consumption Max 5 Watts. at 24Vdc
Current Output 4-20mA (Source or Sink)
≥0.0<1.0 mA: Fault
4.0 mA to 20.0 mA: Inhibit (during configuration/user settings)
22.0 mA: Maximum over range
Terminals 15 x screw terminals suitable for wire diameter 0.5mm2 to 2.5mm 2 (20AWG to 13AWG)
Relays 3 x 5A@250VAC. Selectable normally open or normally closed (switch) and energized/de-energized (programmable)
Communication RS485, MODBUS RTU
Construction
Material Epoxy painted aluminium alloy or 316 Stainless Steel
Weight (approx) Aluminium Alloy LM25: 4.4lbs
316 Stainless Steel: 11lbs
Mounting Pole or wall mounting
Cable Entries 2 x 3/4" NPT
Sensor Entries 3/4" NPT

Questions & Answers