Accessories

TC with tube and plug NiCr-Ni

Probe extension cable 16'

RS 232 data transfer cable, 5.9 ft / 1.8 m

5' probe connection cable

16' probe connection cable

RS232 connection cable for the data logger GSM alarm modem, 6.5 ft / 2 m

Silicone heat conducting paste 0.49 oz (max. 500°F)

AC power supply / charger, 110V for 475 & 535

Sintered cap 21mm diameter

Teflon sintered filter (21mm) diameter

Sensor metal protective cap (slotted), Ø 12 mm, flow velocities of < 7 m/s, especially suited to cleanrooms, not suitable for dusty or high humidity environments G4, M04

Cap with wire mesh filter, Ø 12 mm, for protection against coarse particles. G2, M02

PTFE (Teflon) sintered filter, Ø 12 mm, not affected by condensation, water-repellent, resistant to corrosive substances. Applications: compressed air measurements, high humidity range (continuous measurement), high flow velocities

TC adapter to connect NiCr-Ni thermocouples and probes with open wire ends

Measuring Range: -200 to +900°C

Handle for measuring tips

Temperature measuring tip T/C K, sheath T

Temperature measuring tip 42" T/C K, sheath T

Measuring Range: -60 to +130 °C

Connector cable for high pressure probes

Telescopic handle for plug in vane probes

Anemometer handle

Lithium button battery, CR2032

Silicone hose (16' long) for pressure measument

0554 0549 Fast IR Printer by Testo

The universal printer with IRDA and infrared interface saves you time since it stores the print data prior to printing. Data transfer is completed within 2 seconds. The instrument is then immediately ready for operation. The readings are saved black on white with date and time.

• System compatibility with other Testo measuring instruments (also downward compatibility)
• Fast data transfer, the measuring instrument is ready for use again within 2 sec.
• Fast print function thanks to newest line printer
• Energy-saving Auto-off/Wake-up function
• Testo design with integrated magnetic plate
• Robust housing (adapted to testo 327)
• Mains operation possible (same mains unit as for testo 327/330)

Thermal Printer Paper - 6 rolls (10 year legibility)

Stainless sintered cap Ø 12 mm for high flow velocity or in contaminated air. G1, M01

Salt solutions for checking RH probe perfromance, 11.3% and 75.3% RH, w/ adapter for humidity probe

Teflon sintered filter, Ø 12 mm, corrosive substances, high RH, high velocity

testovent 410 Flow Funnel for low flow (< 50 CFM)

testovent 415 Flow Funnel for low flow (< 50 CFM)