Oakton Eutech DO 500 1/4-DIN Dissolved Oxygen Transmitter with Display - WD-35151-10

Item #:

WD-35151-10

Brand:

Oakton Instruments

Oakton Eutech DO 500 1/4-DIN Dissolved Oxygen Transmitter with Display - WD-35151-10

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us

Share this product:

Description

WD-35151-10 Eutech DO 500 1/4-DIN Dissolved Oxygen Transmitter with Display by Oakton

Economical, industrial, low-voltage transmitter with display

This transmitter provides local monitoring of oxygen concentrations, temperature, and also provides a 4 to 20 mA output signal to a centralized control, datalogging, or recording system. The IP65-rated housing can be easily mounted on plates, poles,or walls. Requires a 12 to 24 VDC power input�ideal for industrial settings such as chemical processing, food processing, galvanic decontamination, and clean or wastewater control.

Setup and calibration are easy with the large LCD and front-panel push buttons that guide you through the steps. Transmitter can be programmed for manual or automatic temperature compensation (ATC) with independent settings for process and calibration temperatures. Unique, selectable hold function freezes output current at 22 mA when programming or performing calibrations. Out-of-range concentrations can also be indicated by 3.8 mA output when selected. Order dissolved oxygen electrode separately.

Measures DO in mg/L, ppm, or % saturation and displays temperature
One- or two point-calibration
Manual salinity and barometric pressure compensation

Specifications

Range	0 to 199.9%; 0.0 to 19.99 mg/L (ppm)
Accuracy	1.5% FS
Calibration	one point at 100% saturation
ATC	manual or automatic, from 0 to 50°C
Input	galvanic dissolved oxygen sensor
Output	4 to 20 mA
Operating Voltage	12 VDC to 24 VDC
Load	100 max load for 12 VDC and 600 ma
Dimensions	3-3/4" x 3-3/4" x 2-5/8" (1/4 DIN) (9.5 x 9.5 x 6.7 cm)
Shipping weight	2 lbs (0.9 kg)
Temperature Resolution	0.1°C (0.1°F)
Conductivity Accuracy	±1% full-scale
Ion Accuracy	±0.5% full-scale (monovalent); ±1% full-scale (divalent)
TDS Accuracy	±1% full-scale
DO Accuracy	±0.2 mg/L; ±2%
Temperature Accuracy	±0.5°C (±0.9°F)
Conductivity Calibration	Manual up to 5 points (1 per range); automatic up to 4 points (84.0 μS/cm, 1413 μS/cm, 12.88 mS/cm, 111.8 mS/cm)
DO Calibration	Two points; 100% and 0%
Temperature Calibration	Offset 0.1°C (0.1°F) increments
TDS factor	0.40 to 1.00
Cell constant	0.100 to 10.000
DO salinity correction	Range: 0.0 to 50.0 ppt Resolution: 0.1 ppt
DO pressure correction	Range: 500 to 1499 mm Hg, 66.6 to 199.9 kPa Resolution: 1 mm Hg, 0.1 kPa
Memory	up to 500 sets with GLP date and time
Output	infrared, IrDA
Real-time clock	time-and-date stamp on calibration and stored data
Temperature normalization	15 or 30°C
Temperature coefficient	linear or pure
Temperature compensation	automatic or manual (selectable), from 0 to 100°C
Ambient operating temperature	0 to 50°C (32 to 122°F)
Power	four 1.5 V AA batteries (included) or optional universal AC adapter, up to 200 hours continuous use
Dimensions	Meter: 7.50"L x 3.75"W x 2.25"H (19 x 9.5 x 5.7 cm) Boxed: 9.13"L x 9.13"W x 2.75"H (23 x 23 x 7 cm)
Weight	Meter: 1 lb (0.5 kg) Boxed: 2 lb (0.9 kg)