1-866-4 JJSTECH(1-866-455-7832)

Oakton Eutech pH 1000 1/4-DIN Controller, 110 VAC - WD-56710-00

Item #:
WD-56710-00
Brand:
Oakton Instruments
Oakton Eutech pH 1000 1/4-DIN Controller, 110 VAC - WD-56710-00
$730.00
Qty

Discontinued

Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
Oakton Eutech pH 1000 1/4-DIN Controller, 110 VAC - WD-56710-00

Oakton Eutech pH 1000 1/4-DIN Controller, 110 VAC - WD-56710-00

$730.00

Discontinued


WD-56710-00 Eutech pH 1000 1/4-DIN Controller, 110 VAC by Oakton

Economical, reliable on/off control even in high electrical noise applications!

Control your process with three available control strategies: On/off, proportional pulse length, or proportional pulse frequency. Use proportional control to gradually increase or decrease pump or valve response, depending on the deviation from the set point.

Manually control test relays with the touch of one button. Relays include programmable time delay to minimize false alarms. Hold relay feature lets you connect other controllers, flow switches, or level switches for failsafe operation.

Controller is compatible with a variety of electrodes, including glass and antimony. Symmetrical electrode inputs eliminate electricalnoise problems when used with a solution ground. Connections are made through the two removable terminal strips for easy installation.

  • Large dual LCD shows both pH (or mV) and temperature
  • Two set point, two SPDT relay operation- choose from lo/lo, lo/hi, hi/lo or hi/hi control
  • Separate alarm relay
  • 0 to 2000 second time delay adjustment on all relays
  • Separately adjustable high and low set point hysteresis bands
  • 0-20/4-20 mA transmitter/recorder output
  • Push button two-point calibration
  • On-line electrode offset adjustment
  • Hold feature lets you connect flow or level switches to protect your pump
  • Two level password protection
  • LED indicators signal control activities
  • Battery back-up of memory
Measures pH, mV, °C
pH Range 0.00 to 14.00 pH
pH Resolution 0.01 pH
pH Accuracy ±0.01 pH
pH Calibration one or two points (select from pH 1.00, 4.00, 7.00, 9.00, 10.00)
mV Range ±1000 mV
mV Resolution 1 mV
mV Accuracy ±1 mV
mV Calibration offset for ORP mV calibration, or two points (20% and 80%) for ORP % calibration
Temperature Range -9.9 to 125°C
Temperature Resolution 0.1°C
Temperature Accuracy ±0.1°C
Temperature Calibration offset up to ±5°C
Control type on/off or proportional (selectable)
Number of inputs one
Number of set points two (high and low)
Separate alarm relay yes
Output Control 2 SPDT relays, 6 A at 110 VAC, 250 VAC maximum
Output Alarm 1 SPDT relay, 6 A at 110 VAC, 250 VAC maximum
Output Pulse pulse length (0.5 to 20 sec) or pulse frequency (60 to 120 pulses per min)
Output Current isolated 0-20.4-20 mA, with 20% to 100% full-scale scalable boundaries, 600 maximum load
Hysteresis 0.1 to 1.0 pH, 10 to 100 mV, or 1 to 10%
Relay delay selectable, 0 to 2000 seconds
Input impedance 10^12 M
Electrical isolation yes, galvanically
Temperature Sensor 100 or 1000 Pt RTD
Temperature Compensation Automatic or manual from -9.9 to 125°C
Password protection two level password
Display dual line LCD, 4-digit upper and 3 1/2 digit lower
Operating Temperature -10 to 60°C
Housing 1/4 DIN
Dimensions 3.8" x 3.8" x 6.9" (9.6 x 9.6 x 17.5 cm)
Shipping weight 2.5 lbs (1.2 kg)

Datasheets & User Manuals

Questions & Answers


There are no questions or answers for this item.