1-866-4 JJSTECH(1-866-455-7832)

Honeywell Analytics XNX Universal Transmitter, ATEX M25 SS MDBS FOR TOX/O2 SNSR - XNX-AMSE-MNNNN

Item #:
XNX-AMSE-MNNNN
Brand:
Honeywell Analytics
Honeywell Analytics XNX Universal Transmitter, ATEX M25 SS MDBS FOR TOX/O2 SNSR - XNX-AMSE-MNNNN
$1,886.00
Qty
Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
Honeywell Analytics XNX Universal Transmitter, ATEX M25 SS MDBS FOR TOX/O2 SNSR - XNX-AMSE-MNNNN

Honeywell Analytics XNX Universal Transmitter, ATEX M25 SS MDBS FOR TOX/O2 SNSR - XNX-AMSE-MNNNN

$1,886.00

XNX-AMSE-MNNNN XNX Universal Transmitter, ATEX M25 SS MDBS FOR TOX/O2 SNSR by Honeywell Analytics

XNX Universal Transmitter, ATEX M25 AL FF HRT FOR TOX/O2 SNSRThe XNX Universal Transmitter, now with HART EDDL, marks a new turn in gas detection from Honeywell Analytics. It supports the widest range of sensors on a common platform and offers a modular choice of inputs and outputs.

XNX is designed for flexible integration, simple installation, user-friendly operation and straight-forward maintenance. It is ideal for use with a range of gas monitoring controllers or industry standard PLCs. The introduction of our HART Enhanced Device Descriptor Language (EDDL) software provides users with an at-a-glance indication of the health of their gas detectors in the field.

Bringing together the best solutions in gas detection

Electrochemical

  • Proven electrochemical sensing technology
  • Surecell™ electrochemical cells are ideal for hot and humid environments
  • Long life sensing cells (typical >2 years)
  • Patented 'Reflex' sensing element verification diagnostics
  • Sensor recognition software auto configures transmitter
  • Plug and play factory configured sensors
  • Intrinsically safe sensor connection permits hot swap, reducing down time

Catalytic Bead

  • Supports Honeywell Analytics 705, 705HT, Sensepoint, Sensepoint HT and MPD sensors
  • Fast response to wide range of hydrocarbons and flammables

Infrared (Open Path IR, Point IR, IR Cell)

  • Supports Honeywell Analytics Searchline Excel, Searchpoint Optima Plus
  • Failsafe operation
  • Fast speed of response
  • Reduced routine maintenance
  • Immune to catalytic poisons
  • Long operating life
  • Works in inert atmospheres

High performance

  • Flammable gas detection 0 to 100% LFL/LEL
  • Point IR with heated optics provides immunity to poisoning and no hidden faults
  • Open-path IR flammable gas detection in LEL-m measurement
  • Electrochemical cell offers toxic gas detection in ppm
  • IR cell provides CO2 and combustible gas monitoring
  • Robust and reliable operation in explosive areas and harsh environments

Flexible Operation

  • 3 versions - supports (Catalytic Bead and IR Cell), Electrochemical Cell and IR (point and open-path) gas detection
  • Multi-Purpose Detector (MPD) with field serviceable mV, Catalytic bead and IR Cell capability
  • 4-20mA with HART® as standard
  • HART Enhanced Device Description Language (EDDL) software*
  • Multiple communications options include up to 3 relays, MODBUS® and FOUNDATION® H1 Fieldbus
  • Optional local IS port for handheld HART configurator

Easy to Use

  • Large, backlit, easy-to-view LCD display offers multisensory indicators (visual icons, colored buttons, text, etc.) to display gas and sensor readings
  • User interface supported by 8 selectable languages (English, Spanish, German, Italian, Portuguese, French, Russian, Chinese)
  • Self-test and fault indication features
  • Non-intrusive, one-man operation
  • Quick calibration with auto-inhibit

Easy to Install

  • 3 or 4 wire operation, source, sink or isolated
  • Simple plug-in sensors and replaceable cells
  • NEMA 4X IP66 rated for rugged indoor/outdoor use
  • Five conduit entries for ease of installation

Cost Effective

  • Minimal training required
  • One-man operation
  • Plug-in sensor replacement
  • All necessary accessories included
Electrical
Operating Voltage EC/mV: 16V to 32V (24V nominal) ** Startup/Normal values ** IR: 18V to 32V (24V nominal) ** Startup/Normal values **
Power Consumption
Configuration
Max Power
Inrush
XNX EC
6.2 w
<1A, <10ms@24VDC
XNX mV
6.5 w
<750mA <2ms@24VDC
XNX IR (Optima)
9.7w
<1A, <10ms@24VDC
XNX IR (Excel)
13.2w
<1A, <10ms@24VDC
Termination Crimp style pluggable with retaining screws, 12-28 AWG (2.5 to 0.5mm2) with Shorting Jumpers: 14-28 AWG (2.0 to 0.5mm2)
NOTE:
To maintain EMC integrity, wiring must be shielded by either an integral shield or run through conduit or pipe. Shield must provide 90% coverage.
Signal Standard HART over 3-wire 4-20 mA (sink, source, or isolated)
Optional Modbus over RS-485
20 mA HART over 3-wire 4-20mA (sink, source, or isolated) compliant with NAMUR NE43
Cable Ports 5 - (2 right, 2 left, 1 bottom) Available in 3/4" NPT, or M25
Unpowered battery life (Real Time Clock) 3 years at rated storage temperature
Construction
Material Marine grade aluminum alloy or SS316. 5-coat painted finish.
Dimensions 159 x 197 x 113.8 mm / 6.138 x 7.75 x 4.48 inches
Weight 2.27 kg (5 lb) Aluminum
5 kg (11 lb) Stainless
XNX® Enclosure Integral Mounting Lugs for Wall- or Optional Pipe-Mount, Optional Wall/ Ceiling Bracket
User Interface
Standard Custom Backlit LCD, magnetic wand operation of local user interface
Optional HART Handheld with IS Port
Environmental - Transmitter Operating
IP Rating IP66
Temperature* Transmitter: -40°C to +65°C (-40°F to +149°F)
MPD**-CB1: -40°C to +65°C (-40°F to +149°F)
MPD**-I**: -20°C to +50°C (-4°F to +122°F
Humidity 0 to 99% RH non-condensing
Pressure 80 kPa to 120 kPa
Air Speed 0-6 m/sec
Environmental - Transmitter Storage
Temperature -40°C to +65°C / -40°F to +149°F
Humidity 0 to 99% RH non-condensing
Communication Options
Relays Type: 3 form "C" SPCO contacts for alarm and fault indication.
Rating: 250 VAC, 5A/24 VDC, 5A (2 Alarm, 1 Fault)
A remote reset is provided to silence alarms. (The FOUNDATION Fieldbus, relay, and Modbus options are mutually exclusive.)
Modbus Modbus/RTU over RS-485 physical layer. Interface isolated; includes switchable 120 Ohm termination resistor.
Baud rates: 1200 to 38,400; 19,200 default.
(The FOUNDATION Fieldbus, relay, and Modbus options are mutually exclusive.)
FOUNDATION Fieldbus H1 Physical Layer.
31.25 kbit/s Manchester encoded signal.
AMIS-49200 Fieldbus MAU (media access unit).
SPC4-2 Fieldbus Controller.
The FOUNDATION Fieldbus, relay, and Modbus options are mutually exclusive.

Questions & Answers