1-866-4 JJSTECH(1-866-455-7832)

Jenco Conductivity/SalinityTemperature Controller/Transmitter - 6308CST

Item #:
6308CST
Brand:
Jenco
Jenco Conductivity/SalinityTemperature Controller/Transmitter - 6308CST
$549.00
Qty
Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
Jenco Conductivity/SalinityTemperature Controller/Transmitter - 6308CST

Jenco Conductivity/SalinityTemperature Controller/Transmitter - 6308CST

$549.00

6308CST Conductivity/SalinityTemperature Controller/Transmitter by Jenco

Our best selling 4-wire conductivity, salinity and temperature on-line transmitter/controller.

Conductivity/salinity analyzer, 1/4 DIN panel mount single parameter analyzer with an IP65 case, and 4-wire cells. Has programmable reference temperature and coefficients. The 4 to 20 mA output is fully programmable, reversible and isolated. There are 2 programmable relays for conductivity/salinity and one relay for temperature and an RS-485 (modbus) interface. Password & ID protected. Graphical display. 115/230 V AC.

  • RS-485 (modbus) output
  • Programmable relays for conductivity/salinity
  • Reversible and isolated 4 to 20 mA output
  • Programmable relay for temperature
  • Conductivity/salinity/temp. measurement & control
  • Simultaneous analysis and display for measurement and controls
  • User programmable reference temperature temperature coefficient
  • 4-wire cells for long cable length & wide measurement range
Conductivity Range 0 uS/cm to 200.0 mS/cm
Conductivity Resolution 1 μS/cm, 0.01 mS/cm, 0.1 mS/cm
Conductivity Accuracy ±0.5% F.S. ± 1 digit
Salinity Range 0.0 to 70.0 ppt
Salinity Resolution 0.1 ppt
Salinity Accuracy ±0.5% F.S. ± 1 digit
Temperature Range -10.0 to 120°C
Temperature Resolution 0.1 °C
Temperature Accuracy ±0.3 °C
Reference Temperature 10 °C to 29 °C
Temperature Coefficient 0.00 % to 4.99%
Basic Cell Constant 0.475
Cell Constant Range ±30% of basic cell constant
Output Relays Numbers Two programmable high or low relays for conductivity, One programmable high or low relays for Temp.
Control Type On/Off
Relay Output 5 amps at 115 VAC, 2.5 amps at 230 VAC
Relay Set Point Hysteresis User programmable
Current Output Isolated 4 to 20 mA
Isolated Voltage 500 V DC
Maximum Load 500 ohm
ATC Sensor Thermistor 10k ohms at 25 °C
Security Protection 4 digit password
Keypad Audio feedback
Digital output RS485 (modbus)
Display Graphic LCD w/backlight
Power 115 V AC or 230 V AC 50/60 Hz
Dimensions 1/4 DIN, depth 148 mm
Weight 950 g

Datasheets & User Manuals

Questions & Answers


There are no questions or answers for this item.