Jenco pH or ORP Analyzer/Controller, 4-Relays, IP-65 Case, RS-485 - 6312PTB

Item #:

6312PTB

Brand:

Jenco

Our tech experts are ready to help!

Share this product:

6312PTB pH or ORP Analyzer/Controller, 4-Relays, IP-65 Case, RS-485 by Jenco

Graphic LCD with manual backlight displays pH, temperature, relay status, and transmitter current mA output.
Automatic buffer recognition of US and NIST buffer sets. Calibration data is stored in memory and is ready for use on power up.
Two sets of isolated and reversible 4-20 mA current output for pH and temperature allows it to be used as a proportional output.
4 programmable on/off relays: 3 for pH and 1 for temperature.
RS-485 output for remote access allows multiple units to be connected and ganged together.
Password protection.
IP65.

Range	pH: -2.00 to 16.00ph Temperature: -10.0 to 120.0°C
Resolution	pH: 0.01pH Temperature: 0.1°C
Accuracy	pH: ±0.01pH±1 digit Temperature: ±0.2°C
General
pH Buffer Recognition	(4.01 ,7.00 ,10.01) or (4.00,6,86,9.18), user selectable
pH Electrode Offset Recognition	±100mV at pH 7.00 /-91.7mV to +108,3mV at ph 6.86
pH Electrode Slope Recognition	±30% at pH 4,00 , 4,01 ,9.18 or 10.01
Temperature Compensation	Auto -10.0 to 120.0°C(Thermistor , 10K ohm at 25.0 °C)
Input Impedance	>10(exp)13 ohms
Output	Two current outputs for conductivity and temperature
Current Output Range	4 to 20 mA(isolated),programmable span
Current Output Scale	User programmable ,linear
Maximum Load	500 ohm
Isolation Voltage	500V DC
Control Type	4 ON/OFF controls
Relay Output	5A at 115V AC or 2.5A at 220V AC, resistive load only
Display	128 x 64 graphical LCD with backlight
Security	4-digit password
Power	115 V AC or 230V AC at 50/60 HZ factory pre-set
Ambient Temperature Range	From 0 to 50 °C
Weight/Case	950 grams / IP 65 ,1/4 DIN case, 148mm depth