Jenco Single Parameter pH or ORP Controller, 2-Relays, IP-65 Case, RS-485 - 6313

Item #:

6313

Brand:

Jenco

Our tech experts are ready to help!

Share this product:

6313 Single Parameter pH or ORP Controller, 2-Relays, IP-65 Case, RS-485 by Jenco

Clear LCD displays pH or mV, with temperature and relay status simultaneously.
Automatic buffer recognition of US and NIST buffer sets. Calibration data is stored in memory and is ready for use on power up.
Displays absolute and relative ORP.
Isolated and reversible 4-20 mA current output for pH or ORP allows it to be used as a proportional output.
2 programmable on/off relays: 2 for pH or ORP.
CE Approved
Password protection.
IP65

Range	pH: -2.00 to 16.00ph mV(absolute /relative): -2500 to +2500mV /-6499 to +6499mV Temperature: -10.0 to 120.0°C
Resolution	pH: 0.01pH mV(absolute /relative): 1mV /1mV Temperature: 0.1°C
Accuracy	pH: ±0.01%±1 digit mV(absolute /relative): ±0.01%±1 digit Temperature: ±0.2°C
General
pH Buffer Recognition	(4.01 ,7.00 ,10.01) or NIST (4.00,6,86,9.18), user selectable
pH Electrode Offset Recognition	±100mV at pH 7.00 /-91.7mV to +108,3mV at pH 6.86
pH Electrode Slope Recognition	±30% at pH 4,00 , 4,01 ,9.18 or 10.01
Temperature Compensation	Auto -10.0 to 120.0°C (Thermistor , 10K ohm /Resisotr,Balco 3K ohm at /RTD, PT-1000)
Input Impedance	>10(exp)13 ohms
Input Select	User selectable pH or ORP
Current Output Range	4 to 20 mA(isolated),programmable span
Current Output Scale	User programmable ,linear
Maximum Load	500 ohm
Isolation Voltage	500V DC
Control Type	2 ON/OFF controls
Relay Output	5A at 115V AC or 2.5A at 220V AC, resistive load only
Security	4-digit password
Power	115 V AC or 230V AC at 50/60 HZ
Ambient Temperature Range	From 0 to 50 °C
Weight/Case	940 grams / IP 65 ,1/4 DIN case, 148mm depth