1-866-4 JJSTECH(1-866-455-7832)

Jenco VisionPlus Conductivity Meter - EC330

Item #:
Jenco VisionPlus Conductivity Meter - EC330
Send This Page to a Friend

Ask an Expert

Our tech experts are ready to help!

1-866-4 JJSTECH (1-866-455-7832)

Email Us
Share this product:
Jenco VisionPlus Conductivity Meter - EC330

Jenco VisionPlus Conductivity Meter - EC330


EC330 VisionPlus Conductivity Meter by Jenco

Jenco EC330 is an easy to use, IP67 rated conductivity tester with TDS and temperature readout. Key features include dual display of conductivity or TDS with temperature, selectable or auto ranging, replaceable conductivity cell and IP67 rated body.

This tester is RoHS compliant.

  • Simultaneous display of conductivity and temperature, or TDS and temperature
  • 1 or 2 point calibration
  • Automatic temperature compensation
  • Selectable or auto ranging of conductivity and TDS readings
  • Replaceable conductivity cell
  • 6 selectable units of measure (uS/cm, mS/cm, mg/L, g/L, C, F)
  • Data hold
Range Conductivity, K=1.0: 0 to 1990 uS; 2.00 to 19.90 mS
TDS, K=1.0: 0 to 1000 mg/L; 1.00 to 10.00 g/L
Temp °C: 0.0 to 99.5 °C
Temp °F: 32 to 212 °F
Resolution Conductivity, K=1.0: 5 uS; 0.05 mS
TDS, K=1.0: 5 mg/L; 0.05 g/L
Temp °C: 0.5 °C
Temp °F: 1 °F
Accuracy Conductivity, K=1.0: ± 1% FS
TDS, K=1.0: ± 1% FS
Temp °C: ± 0.5 °C
Temp °F: ± 1 °F
Temp compensation Automatic from 0.0 to 60.0 °C 
Temp coefficient 1.91% / °C 
Reference temp 25 °C 
TDS constant 0.50 
Calibration 1 or 2 point (1415uS at 0~1999uS/cm range; 12.90mS at 0~19.99mS/cm range)
Electrode type / cell constant Two wire conductivity cell / 1.0
Temp sensor Thermistor, 10k ohms, at 25 °C 
Temp unit °C and °F 
Display LCD 
Power LR44 x 4 batteries
Battery life >100 hours
Auto power off After 10 minutes of inactivity 
Case IP-67 dust-proof and water-proof up to 1 meter 
Weight 105 grams (Including batteries)
Dimensions (W x D x H) 19.3cm x 4.4cm x 2.5cm

Questions & Answers

There are no questions or answers for this item.