- All Products
- Shop by Brands
- BW Technologies
- BW Technologies
- BW Technologies Monitors
- Models
- BW Clip
- BW Clip4
- GasAlertClip Extreme
- GasAlert Extreme
- GasAlertMicroClip XT
- GasAlertMicroClip XL
- GasAlertMicroClip X3
- GasAlertQuattro
- GasAlertMax XT II
- GasAlertMicro 5 Series
- SamplerPak
- IntelliDox Docking System
- MicroDock II
- BW Ultra
- BW Solo
- Gas Monitors
- Gas Monitor Manufacturers
- BW Technologies
- Bacharach
- Biosystems
- Crowcon
- Gas Clip Technologies
- GfG Instruments
- GMI/Detcon
- Honeywell Analytics
- Industrial Scientific
- MSA
- RAE Instruments
- RKI Instruments
- Gas Monitor Categories
- Single-Gas Monitors
- Multi-Gas Monitors
- Zero Maintenance Monitors
- Fixed System Gas Monitors
- Confined Space Kits
- Wireless Fixed Point Gas Detectors
- Hydrogen Sulfide (H2S) Monitors
- Calibration Gas
- Combustion Analyzers
- Water Quality
- Reliability Instruments
- Refractometers
- HVAC
- Weather
- Temperature
- Laboratory
- Sound
- IAQ
- Electrical
- All Categories
Extech MA150 200A Mini AC Clamp Meter + NCV Detector with NIST
Item #:
EXT-MA150-NIST
Brand:
Extech
Share this product:
MA150 200A Mini AC Clamp Meter + NCV Detector with NIST by Extech
Features
- Measures DC Current, AC/DC Voltage, and Resistance
- Diode and Continuity test
- Max hold function
- 0.7" (18mm) jaw opening; 300MCM cable size
- Built-in AC non-contact Voltage (NCV) detector (120/240VAC, 50/60Hz)
- LCD backlit display
- Built-in white LED flashlight
- Auto Power Off
- Complete with two AAA batteries and soft case
| Display | 2000 count Digit LCD with white LED backlight |
| Polarity | Minus sign ( - ) indicates negative polarity |
| Jaw opening | 0.7" (18mm) |
| Current sensor | Hall effect sensor type |
| AC Current Bandwidth | 50/60Hz |
| AC Voltage Bandwidth | 50/400Hz |
| Overload indication | "OL" displayed on the LCD |
| Display rate | 2 readings/second, nominal |
| Battery | Two 1.5V AAA batteries |
| Low Battery indication | "BATT" displayed on the LCD |
| Auto Power off | approx. 15 minutes |
| Operating conditions | 32 to 86ºF (0 to 30ºC) 90%RH; 86 to 104ºF (30 to 40ºC) 75%RH; 104 to 122ºF (40 to 50ºC) 45%RH |
| Storage conditions | - 14 to 140ºF (-30 to 60ºC); < 90% Relative Humidity |
| Altitude | Operate at less than 3000 meters |
| Weight | 6.2 oz. (176g) including battery |
| Dimensions | 6.5 x 2.6 x 1.3” (164 x 65 x 32mm) (HWD) |
| Standards | For indoor use and in accordance with the requirements for double insulation to IEC1010-1 (1995): EN61010-1 (1995) Overvoltage Category III 300V and Category II 600V, Pollution Degree 2. |
| Function | Range | Resolution | Accuracy (of reading) |
| AC Current | 200.0A | 0.1A | ± (2.5% rdg + 10 digits) |
| DC Voltage | 200.0mV | 0.1mV | ±(0.5% rdg + 5 digits) |
| 2.000V | 1mV | ±(1.2% rdg + 3 digits) | |
| 20.00V | 10mV | ||
| 200.0V | 0.1V | ||
| 600V | 1V | ±(1.5% rdg + 3 digits) | |
| AC Voltage | 2.000V | 1mV | ±(1.5% rdg + 3 digits) |
| 20.00V | 10mV | ||
| 200.0V | 0.1V | ||
| 600V | 1V | ±(2.0% rdg + 4 digits) | |
| Resistance | 200.0Ω | 0.1Ω | ±(1.0% rdg + 4 digits) |
| 2.000kΩ | 1Ω | ±(1.5% rdg + 2 digits) | |
| 20.00kΩ | 10Ω | ||
| 200.0kΩ | 100Ω | ||
| 2.000MΩ | 1kΩ | ±(2.0% rdg + 3 digits) | |
| 20.00MΩ | 10kΩ | ±(3.0% rdg + 5 digits) | |
| Non-Contact AC Voltage | 100VAC to 600VAC 50/60Hz | ||
| Diode Test | Test current: 0.3mA typical; Open circuit voltage: 1.5VDC typical |
||
| Continuity | Threshold <120Ω; Test current <1m | ||
